Psychosocial Work Factors and Musculoskeletal Pain: A Cross-Sectional Study among Swedish Flight Baggage Handlers.

OBJECTIVE: Flight baggage handlers sort and load luggage to airplanes. This study aimed at investigating associations between psychosocial exposures and low back and shoulder musculoskeletal disorders (MSDs) among Swedish flight baggage handlers. METHODS: A questionnaire addressing MSDs (Standardized Nordic Questionnaire) and psychosocial factors (Copenhagen Psychosocial Questionnaire, COPSOQ) was answered by 525 baggage handlers in six Swedish airports. RESULTS: Low back (LBP) and shoulder pain (SP) were reported by 70% and 60%, respectively. Pain was reported to interfere with work (PIW) by 30% (low back) and 18% (shoulders), and intense pain (PINT) occurred in 34% and 28% of the population. Quality of leadership was the most dissatisfying psychosocial factor, while the most positive was social community at work. Low ratings in the combined domain Work organization and job content were significantly associated with PIW in both low back and shoulders (Adjusted Hazard Ratios 3.65 (95% CI 1.67-7.99) and 2.68 (1.09-6.61)) while lower ratings in the domain Interpersonal relations and leadership were associated with PIW LBP (HR 2.18 (1.06-4.49)) and PINT LBP and SP (HRs 1.95 (1.05-3.65) and 2.11 (1.08-4.12)). CONCLUSION: Severity of pain among flight baggage handlers was associated with psychosocial factors at work, suggesting that they may be a relevant target for intervention in this occupation.

Herbicide impact on non-target plant reproduction: what are the toxicological and ecological implications?

Declining plant diversity and abundance have been widely reported in agro-ecosystems of North America and Europe. Intensive use of herbicides within cropfields and the associated drift in adjacent habitats are partly responsible for this change. The objectives of this work were to quantify the phenological stages of non-target plants in in-situ field situations during herbicide spray and to compare plant susceptibility at different phenological stages. Results demonstrated that a large number of non-target plants had reached reproductive stages during herbicide spray events in woodlots and hedgerows, both in Canada and Denmark where vegetation varies considerably. In addition, delays in flowering and reduced seed production occurred widely on plants sprayed at the seedling stage or at later reproductive periods, with plants sprayed at reproductive stages often exhibiting more sensitivity than those sprayed as seedlings. Ecological risk assessments need to include reproductive endpoints.

Temporal strategy and performance during a fatiguing short-cycle repetitive task.

This study investigated temporal changes in movement strategy and performance during fatiguing short-cycle work. Eighteen participants performed six 7-min work blocks with repetitive reaching movements at 0.5 Hz, each followed by a 5.5-min rest break for a total duration of 1 h. Electromyography (EMG) was collected continuously from the upper trapezius muscle, the temporal movement strategy and timing errors were obtained on a cycle-to-cycle basis, and perceived fatigue was rated before and after each work block. Clear signs of fatigue according to subjective ratings and EMG manifestations developed within each work block, as well as during the entire hour. For most participants, timing errors gradually increased, as did the waiting time at the near target. Changes in temporal movement strategy were negatively correlated with changes in the level and variability of EMG, suggesting that an adaptive temporal strategy offset the development of unstable motor solutions in this fatiguing, short-cycle work. PRACTITIONER SUMMARY: Sustained performance of operators is essential to maintain competitiveness. In this study of repetitive work, participants gradually changed their temporal movement strategy, for possibly alleviating the effects of fatigue. This suggests that in order to effectively counteract fatigue and sustain performance, industrial production should allow extensive spatial and temporal flexibility.

The effect of work pace on workload, motor variability and fatigue during simulated light assembly work.

This study investigated the effect of work pace on workload, motor variability and fatigue during light assembly work. Upper extremity kinematics and electromyography (EMG) were obtained on a cycle-to-cycle basis for eight participants during two conditions, corresponding to "normal" and "high" work pace according to a predetermined time system for engineering. Indicators of fatigue, pain sensitivity and performance were recorded before, during and after the task. The level and variability of muscle activity did not differ according to work pace, and manifestations of muscle fatigue or changed pain sensitivity were not observed. In the high work pace, however, participants moved more efficiently, they showed more variability in wrist speed and acceleration, but they also made more errors. These results suggest that an increased work pace, within the range addressed here, will not have any substantial adverse effects on acute motor performance and fatigue in light, cyclic assembly work. STATEMENT OF RELEVANCE: In the manufacturing industry, work pace is a key issue in production system design and hence of interest to ergonomists as well as engineers. In this laboratory study, increasing the work pace did not show adverse effects in terms of biomechanical exposures and muscle fatigue, but it did lead to more errors. For the industrial engineer, this observation suggests that an increase in work pace might diminish production quality, even without any noticeable fatigue being experienced by the operators.

Differences in muscle load between computer and non-computer work among office workers.

Introduction of more non-computer tasks has been suggested to increase exposure variation and thus reduce musculoskeletal complaints (MSC) in computer-intensive office work. This study investigated whether muscle activity did, indeed, differ between computer and non-computer activities. Whole-day logs of input device use in 30 office workers were used to identify computer and non-computer work, using a range of classification thresholds (non-computer thresholds (NCTs)). Exposure during these activities was assessed by bilateral electromyography recordings from the upper trapezius and lower arm. Contrasts in muscle activity between computer and non-computer work were distinct but small, even at the individualised, optimal NCT. Using an average group-based NCT resulted in less contrast, even in smaller subgroups defined by job function or MSC. Thus, computer activity logs should be used cautiously as proxies of biomechanical exposure. Conventional non-computer tasks may have a limited potential to increase variation in muscle activity during computer-intensive office work.

Precision of measurements of physical workload during standardised manual handling. Part II: Inclinometry of head, upper back, neck and upper arms.

For measuring the physical exposure/workload in studies of work-related musculoskeletal disorders, direct measurements are valuable. However, the between-days and between-subjects variability, as well as the precision of the method per se, are not well known. In a laboratory, six women performed three standardised assembly tasks, all of them repeated on three different days. Triaxial inclinometers were applied to the head, upper back and upper arms. Between-days (within subjects) and between-subjects (within tasks) variance components were derived for the 10th, 50th and 90th percentiles of the angular and the angular velocity distributions, and for the proportion of time spent in predefined angular sectors. For percentiles of the angular distributions, the average between-days variability was 3.4 degrees , and the between-subjects variability 4.0 degrees . For proportion of time spent in angular sectors, the variability depended on the percentage of time spent in the sector; the relative variability was scattered and large, on average 103% between days and 56% between subjects. For the angular velocity percentiles, the average between-days variability was 7.9%, and the average between-subjects variability was 22%. The contribution of the measurement procedure per se to the between-days variability, i.e., the imprecision of the method, was small: less than 2 degrees for angles and 3% for angular velocity.

The bacterial flora of alpha-Gal knockout mice express the alpha-Gal epitope comparable to wild type mice.

The human genome possesses pseudogenes for the enzyme alpha1,3 galactosyltransferase and hence, human cells and tissues do not express the Galalpha terminated trisaccharide structure Galalpha1-3Galbeta1-4GlcNAc, the so-called alpha-Gal epitope. Circulating antibodies specific for this carbohydrate epitope are, however, present in high amounts in humans. It has previously been hypothesized that the antibody production is induced by the presence of the alpha-Gal epitope in the cell walls of the enteric flora, especially Enterobacteriaceae spp. However, in mice, in which the epitope has been deleted by targeted mutation of the gal-transferase gene, alpha-Gal antibodies do not appear without prior immunization, although the mice through their growth probably have been exposed to a normal bacterial flora of e.g. Enterobacteriaceae spp. It is unknown whether there are different types of immune reactions to antigenic carbohydrate expressing bacteria and whether there are discrepancies in the enteric flora between these knockout mice and their wild type litter mates. In this study the enteric flora of alpha-Gal knockout and wild type mice was compared both in relation to the prevalence of different types of bacteria in the two groups of mice, as well as in relation to the expression of the epitope on the surface of Enterobacteriaceae spp. Our results showed that the enteric flora did not differ significantly between knockout and wild type mice and that it was comparable to the flora known to be present in the intestines of other mice. All Enterobacteriaceae spp. examined expressed the alpha-Gal epitope no matter whether they were isolated from knockout or wild type mice. It is, therefore, discussed whether it is more reasonable to assume that alpha-Gal antibodies in mammals that do not produce alpha1,3 galactosyltransferase such as in the knock mice and in humans are the result of another antigen stimulant than these common representatives of the enteric flora, that we isolated from the two types of mice. Possible candidates for a carrier in humans could be bacteria or viruses not isolated from barrier-bred mice.

Task based exposure assessment in ergonomic epidemiology: a study of upper arm elevation in the jobs of machinists, car mechanics, and house painters.

AIMS: To explore the precision of task based estimates of upper arm elevation in three occupational groups, compared to direct measurements of job exposure. METHODS: Male machinists (n = 26), car mechanics (n = 23), and house painters (n = 23) were studied. Whole day recordings of upper arm elevation were obtained for four consecutive working days, and associated task information was collected in diaries. For each individual, task based estimates of job exposure were calculated by weighting task exposures from a collective database by task proportions according to the diaries. These estimates were validated against directly measured job exposures using linear regression. The performance of the task based approach was expressed through the gain in precision of occupational group mean exposures that could be obtained by adding subjects with task based estimates to a group of subjects with measured job exposures in a "validation" design. RESULTS: In all three occupations, tasks differed in mean exposure, and task proportions varied between individuals. Task based estimation proved inefficient, with squared correlation coefficients only occasionally exceeding 0.2 for the relation between task based and measured job exposures. Consequently, it was not possible to substantially improve the precision of an estimated group mean by including subjects whose job exposures were based on task information. CONCLUSIONS: Task based estimates of mechanical job exposure can be very imprecise, and only marginally better than estimates based on occupation. It is recommended that investigators in ergonomic epidemiology consider the prospects of task based exposure assessment carefully before placing resources at obtaining task information. Strategies disregarding tasks may be preferable in many cases.

Work related shoulder disorders: quantitative exposure-response relations with reference to arm posture.

AIMS: To determine quantitative exposure-response relations between work with highly elevated arms and supraspinatus tendinitis, shoulder pain with disability, and shoulder pain without disability. METHODS: A cross sectional study was conducted in a historical cohort of 1886 males from three occupational groups. Exposure measurements were performed for four consecutive working days in a random sample of 72 currently employed subjects. Individual work histories were obtained by questionnaire and register data. Health status was ascertained by physical examination blinded towards exposure and symptoms. Data were analysed by generalised estimating equation and multiple logistic regression with adjustment for potential confounders. RESULTS: For current upper arm elevation above 90 degrees, a duration increment of 1% of the daily working hours was associated with odds ratios of 1.23 (95% CI 1.10 to 1.39) for supraspinatus tendinitis, 1.16 (95% CI 1.08 to 1.24) for shoulder pain with disability, and 1.08 (95% CI 1.04 to 1.13) for shoulder pain without disability. The outcomes were not related to duration of employment in one of the three trades. CONCLUSIONS: Quantitative exposure-response relations were established between current work with highly elevated arms and clinically verified shoulder disorders. Substantial long term cumulative effects were not shown. A potential for primary prevention was revealed.

Precision of measurements of physical workload during standardised manual handling. Part I: surface electromyography of m. trapezius, m. infraspinatus and the forearm extensors.

Though surface electromyography (EMG) has been widely used in studies of occupational exposure, its precision in terms of the variance between-days and between-subjects has seldom been evaluated. This study aimed at such an evaluation. Six women performed three different work tasks: 'materials picking', 'light assembly', and 'heavy assembly', repeated on 3 different days. EMG was recorded from m. trapezius, m. infraspinatus and the forearm extensors. Normalisation was made to a maximal (MVE), and a submaximal (RVE), reference contraction. Variance components between days (within subjects) and between subjects were derived for the 10th, 50th and 90th percentiles, as well as for muscular rest parameters. For the task 'heavy assembly', the coefficient of variation between days (CV(BD)) was 8% for m. trapezius (right side, 50th percentile, MVE normalised values). Larger variabilities were found for m. infraspinatus (CV(BD) 15%), and the forearm extensors (CV(BD) 33%). Between-subjects variability (CV(BS)) was greater, 16% for m. trapezius and 57% for m. infraspinatus, 29% for the forearm extensors. RVE normalisation resulted in larger CV(BD), while reducing CV(BS). The between-days and between-subjects variability may be used to optimise sampling strategy, and to assess the bias in epidemiological studies. The bias caused by measurement procedures per se is acceptable.

Group-based measurement strategies in exposure assessment explored by bootstrapping.

OBJECTIVES: The precision of mean exposure to pushing was examined in 2 occupational groups using various combinations of the number of workers and measurements per worker. METHODS: The frequency and duration of pushing of the 2 occupational groups was assessed using onsite observation. All data were divided into successive periods of 30 minutes of observation. The precision of the group mean exposure to pushing was expressed by 90% confidence intervals obtained by bootstrapping. The effect on the confidence interval of varying numbers of workers and numbers of periods per worker was examined. RESULTS: For both occupational groups there was little precision to be gained when >10 workers were observed. Within the maximum number of workers used in the bootstrap simulations, it appeared that, beyond 10 workers, the confidence intervals decreased by <5% for every worker that was added, when each worker was observed at least 8 periods of 30 minutes. If workers were observed exactly 4 periods of 30 minutes per worker, an additional 4 workers were required to compensate for the loss of precision. An unbalanced strategy with approximately 8 periods of 30 minutes per worker hardly decreased the precision of the group mean, however. CONCLUSIONS: The precision of the group-based mean exposure to pushing is influenced by the number of workers observed and by the number of repeated measurements per worker. In the planning of measurement strategies, it is advisable to account for possible sources of variance in advance and to assess the exposure variability.

Tumor-associated antigens identified by mRNA expression profiling induce protective anti-tumor immunity.

Defined tumor-associated antigens (TAA) are attractive targets for anti-tumor immunotherapy. Here, we describe a novel genome-wide approach to identify multiple TAA from any given tumor. A panel of transplantable thymomas was established from an inbred p53-/- mouse strain. The resulting tumors were examined for gene expression by mRNA microarray scanning. This analysis revealed heterogeneity of the tumors in agreement with the assumption that they represent different tumorigenic events. Several genes were overexpressed in one or more of the tumors. To examine whether overexpressed genes might be used to identify TAA, mice were immunized with mixtures of peptides representing putative cytotoxic T cell epitopes derived from one of the gene products. Indeed, such immunized mice were partially protected against subsequent tumor challenge. Despite being immunized with bona fide self antigens, no clinical signs of autoimmune reactions were observed. Thus, it appears possible to evaluate the entire metabolism of any given tumor and use this information rationally to identify multiple epitopes of value in the generation of tumor-specific immunotherapy. We expect that human tumors express similar tumor-specific metabolic imprints, which may be used to identify patient-specific arrays of TAA. This may enable a multi-epitope based immunotherapy with improved prospects of clinical tumor rejection.

Shoulder-arm muscle load and performance during control operation in forestry machines. Effects of changing to a new arm rest, lever and boom control system.

Three work station design studies in forestry machines were carried out with regard to shoulder/arm muscle load. (1) In an arm rest study, a movable (in the sagittal plane) arm rest was compared with a fixed one; (2) in a lever study, a mini lever with a small deflection was compared with an ordinary hand lever; (3) in a boom control study, a computer controlled boom system was compared with an ordinary boom system. In the arm rest study eight male subjects carried out lever operations in the laboratory. In the lever and boom studies, 15 male forestry students operated forwarders. Muscle load, cycle time, skill, perceived exertion, heart rate and preferred set up were recorded. The muscle loads on the upper trapezius, infraspinatus, extensor carpi ulnaris and flexor carpi radialis were recorded by electromyography. With mini lever and movable arm rest the upper trapezius load was reduced with preserved or decreased cycle time, although the grand mean of the 'static' load level was only about 2% of maximal voluntary contraction (MVC) and the effects of the new designs were small (about 0.7% MVC). The subjects preferred the lever/arm rest also giving the lowest muscle load. No differences between levers or arm rests were found in skill, perceived exertion or heart rate. It was not possible to draw any definitive conclusions regarding effects of the boom control system, due to technical problems. According to the literature, the duration of lever operation has increased considerably in forestry during recent years as part of a rationalization process. Partly due to this, it is suggested that the investigated work station improvements may not be sufficient to eliminate the risk for shoulder-neck disorders.

Motor control and cardiovascular responses during isoelectric contractions of the upper trapezius muscle: evidence for individual adaptation strategies.

Ten females (25-50 years of age) performed isometric shoulder flexions, holding the right arm straight and in a horizontal position. The subjects were able to see the rectified surface electromyogram (EMG) from either one of two electrode pairs above the upper trapezius muscle and were instructed to keep its amplitude constant for 15 min while gradually unloading the arm against a support. The EMG electrodes were placed at positions representing a "cranial" and a "caudal" region of the muscle suggested previously to possess different functional properties. During the two contractions, recordings were made of: (1) EMG root mean square-amplitude and zero crossing (ZC) frequency from both electrode pairs on the trapezius as well as from the anterior part of the deltoideus, (2) supportive force, (3) heart rate (HR) and mean arterial blood pressure (MAP), and (4) perceived fatigue. The median responses during the cranial isoelectric contraction were small as compared to those reported previously in the literature: changes in exerted glenohumeral torque and ZC rate of the isoelectric EMG signal of -2.81% x min(-1) (P = 0.003) and 0.03% x min(-1) (P = 0.54), respectively, and increases in HR and MAP of 0.14 beats x min(-2) (P = 0.10) and 0.06 mmHg x min(-1) (P = 0.33), respectively. During the contraction with constant caudal EMG amplitude, the corresponding median responses were -2.51% x min(-1) (torque), 0.01% x min(-1) (ZC rate), 0.31 beats x min(-2) (HR), and 0.93 mmHg x min(-1) (MAP); P = 0.001, 0.69, 0.005, and 0.003, respectively. Considerable deviations from the "isoelectric" target amplitude were common for both contractions. Individuals differed markedly in response, and three distinct subgroups of subjects were identified using cluster analysis. These groups are suggested to represent different motor control scenarios, including differential engagement of subdivisions of the upper trapezius, alternating motor unit recruitment and, in one group, a gradual transition towards a greater involvement of type II motor units. The results indicate that prolonged low-level contractions of the shoulder muscles may in general be accomplished with a moderate metabolic stress, but also that neuromuscular adaptation strategies differ significantly between individuals. These results may help to explain why occupational shoulder-neck loads of long duration cause musculoskeletal disorders in some subjects but not in others.

Ergonomic effects of a management-based rationalization in assembly work - a case study.

Due to unsatisfactory productivity, a large company in the Swedish manufacturing industry decided to rationalize their assembly system. The intended rationalization comprised several changes with deliberate ergonomic implications. The main aim of the present study was to evaluate the impact of the rationalization on the physical work load of the operators. The work load was assessed before and after the changes using expert observations, company records and direct technical measurements. The results indicate that the intervention led to only minor changes in muscle load, body postures and movement patterns. Several of the planned initiatives were never implemented, e.g. teaching the workers multiple skills and designing work stations at which a major part of the assembly sequence could be performed. This was mainly due to a policy revision caused by changes in the market situation. In spite of the company's original intentions, the revised production system contained only minor ergonomic improvements. Thus, the realization of the ergonomic potential in a rationalization seems to depend on management culture, as well as factors outside the company.

Physiological comparison of three interventions in light assembly work: reduced work pace, increased break allowance and shortened working days.

An industrial assembly task known to imply a high risk for shoulder-neck disorders was simulated in the laboratory. Eight females (aged 22-32 years) were trained to manage industrial work pace (120 according to the methods-time measurement system, MTM). They carried out seven work protocols at different days with different combinations of work pace (120 or 100 MTM), break allowance (20 min of active or passive breaks added every 2 h), and duration of the working day (2, 4 or 6 h). During 6 h of work at 120 MTM the electromyographic (EMG) amplitude from the upper trapezius muscle increased by about 11%, the EMG zero crossing rate decreased by about 2.5%, and perceived fatigue increased by about 4 CR10 scale units. When work pace was reduced to 100 MTM, the upper trapezius EMG amplitude decreased by 20% and became less variable. Heart rate decreased by about 10 bpm, perceived fatigue decreased by about 1 CR10 scale units, and shoulder tenderness was reduced by about 5%. However, the work task could still not be performed in a physiological steady state. Added breaks, whether active or passive, had no apparent effects on upper trapezius load during work or on physiological responses. Recovery of EMG, maximal strength, heart rate and blood pressure sensitivity, and tenderness was complete 4 h after work, independent of the preceding work conditions. These findings suggest that a limitation of the daily duration of assembly work may be more effective in limiting acute fatigue than reduced work pace or increased break allowance.

The statistical confidence of load estimates based on ramp calibration of upper trapezius EMG.

Ramp calibration has been widely used in ergonomic studies of the shoulder-neck region as a method for estimating muscle forces or glenohumeral torque on the basis of surface electromyographic (EMG) amplitude from the upper trapezius muscle. The relationship between load and EMG amplitude is determined using least-square regression and the present study gives a statistical evaluation of this approach by analysing data from six healthy females performing isometric abductions and flexions of the arm. It is shown that a load estimate corresponding to 25% of maximal strength (25%MVC) may be provided only with a 95% confidence interval of +/- 10%MVC (median of intervals calculated on an individual basis). In many ramps the EMG amplitude residuals of neighbouring points after regression were shown to correlate significantly. This adds further to the length of the confidence interval. 'Short' ramps (load range: 18-31%MVC) generated similar load estimates as 'full' ramps (18-70% MVC), but with a significantly better confidence if inappropriate modelling was controlled for. Ergonomic analyses operating in a real-time domain will be particularly sensitive to errors in pointto-point load estimation and the study suggests that stable results may be obtained only at a group level.