Interplay between polymer chain conformation and nanoparticle assembly in model industrial silica/rubber nanocomposites.

The question of the influence of nanoparticles (NPs) on chain dimensions in polymer nanocomposites (PNCs) has been treated mainly through the fundamental way using theoretical or simulation tools and experiments on well-defined model PNCs. Here we present the first experimental study on the influence of NPs on the polymer chain conformation for PNCs designed to be as close as possible to industrial systems employed in the tire industry. PNCs are silica nanoparticles dispersed in a styrene-butadiene-rubber (SBR) matrix whose NP dispersion can be managed by NP loading with interfacial coatings or coupling additives usually employed in the manufacturing mixing process. We associated specific chain (d) labeling, and the so-called zero average contrast (ZAC) method, with SANS, in situ SANS and SAXS/TEM experiments to extract the polymer chain scattering signal at rest for non-cross linked and under stretching for cross-linked PNCs. NP loading, individual clusters or connected networks, as well as the influence of the type, the quantity of interfacial agent and the influence of the elongation rate have been evaluated on the chain conformation and on its related deformation. We clearly distinguish the situations where the silica is perfectly matched from those with unperfected matching by direct comparison of SANS and SAXS structure factors. Whatever the silica matching situation, the additive type and quantity and the filler content, there is no significant change in the polymer dimension for NP loading up to 15% v/v within a range of 5%. One can see an extra scattering contribution at low Q, as often encountered, enhanced for non-perfect silica matching but also visible for perfect filler matching. This contribution can be qualitatively attributed to specific h or d chain adsorption on the NP surface inside the NP cluster that modifies the average scattering neutron contrast of the silica cluster. Under elongation, NPs act as additional cross-linking junctions preventing chain relaxation and giving a deformation of the chain with the NP closer to a theoretical phantom network prediction than a pure matrix.

Determination of individual diffusion coefficients in evolving binary mixtures by taylor dispersion analysis: application to the monitoring of polymer reaction.

This study demonstrates that it is possible to get valuable information on the individual populations of a binary mixture from the signal obtained by Taylor dispersion analysis (TDA). In the case of mixtures composed of two populations of different sizes (such as a monomer/polymer mixture), the information available from TDA is not restricted to an average diffusion coefficient or an average hydrodynamic radius calculated on the entire binary mixture. In this work, TDA was used to monitor a polymerization reaction. In this scope, it has been possible to determine the degree of conversion and the weight average hydrodynamic radius of the polymer at different reaction times. Three different methods are proposed for the data processing of taylorgrams derived from polymerization mixtures or, more generally, for taylorgrams of binary mixtures. These three methods, either based on deconvolution or on integration of the signal, were found to give similar results. TDA results obtained for a model binary mixture of acrylamide and standard polyacrylamide were consistent with DLS experiments provided that the differences in the type of average hydrodynamic radius values between the two methods are taken into account. An example of application to the monitoring of acrylamide radical polymerization is shown.

Oligo(p-phenylenevinylene)-peptide conjugates: synthesis and self-assembly in solution and at the solid-liquid interface.

Two oligo(p-phenylenevinylene)-peptide hybrid amphiphiles have been synthesized using solid- and liquid-phase strategies. The amphiliphiles are composed of a pi-conjugated oligo(p-phenylenevinylene) trimer (OPV) which is coupled at either a glycinyl-alanyl-glycinyl-alanyl-glycine (GAGAG) silk-inspired beta-sheet or a glycinyl-alanyl-asparagyl-prolyl-asparagy-alanyl-alanyl-glycine (GANPNAAG) beta-turn forming oligopeptide sequence. The solid-phase strategy enables one to use longer peptides if strong acidic conditions are avoided, whereas the solution-phase coupling gives better yields. The study of the two-dimensional (2D) self-assembly of OPV-GAGAG by scanning tunneling microscopy (STM) at the submolecular level demonstrated the formation of bilayers in which the molecules are lying antiparallel in a beta-sheet conformation. In the case of OPV-GANPNAAG self-assembled monolayers could not be observed. Absorption, fluorescence, and circular dichroism studies showed that OPV-GAGAG and OPV-GANPNAAG are aggregated in a variety of organic solvents. In water cryogenic temperature transmission electron microscopy (cryo-TEM), atomic force microscopy (AFM), light scattering, and optical studies reveal that self-assembled nanofibers are formed in which the helical organization of the OPV segments is dictated by the peptide sequence.

Combination of an anionic terminator multifunctional initiator and divergent carbanionic polymerization: application to the synthesis of dendrimer-like polymers and of asymmetric and miktoarm stars.

A new and versatile synthetic strategy that provides access to precisely defined and totally soluble multicarbanionic initiators has been implemented to obtain by divergent growth dendrimer-like samples of polystyrene (PS) (up to the seventh generation) or polybutadiene (PB) (up to the third generation) and also asymmetric and miktoarm stars. This strategy rests on lithium-halide exchange reactions to generate multicarbanionic species and on the design of an original reagent that can concomitantly react with living carbanionic chains/arms to deactivate them and produce multicarbanionic sites after exchange of its bromides against lithium. This reagent, 4,4'-dibromodiphenylethylene (1), functions as a TERminating agent and a Multifunctional INItiator (TERMINI), according to a concept first proposed by Percec in another context. Upon using this anionic TERMINI in living carbanionic polymerization and repeating the two steps of chain end derivatization by 1 and divergent arm growth from the multifunctional sites generated, perfectly defined dendrimer-like polystyrene and polybutadiene could be obtained up to the seventh generation for the former and up to the third generation for the latter. Each step, i.e., chain end modification and arm growth, was carefully monitored, and the dendrimer-like samples of PS and PB were all characterized by size exclusion chromatography equipped with a multiangle laser light scattering detector (SEC/LS) and high-temperature size exclusion chromatography equipped with a viscometric detector (HT-SEC). The viscosity behavior of these dendrimer-like polystyrenes--bell-shaped variation versus the number of generation--was found to be similar to that reported for regular dendrimers. This chemistry, namely this anionic TERMINI, was also exploited to derive three-arm asymmetric and miktoarm stars.

Cross-linking of polybutadiene at the air/water interface: toward an easy access to two-dimensional polymeric materials.

A novel approach to two-dimensionally crosslink polydienes at the air/water interface is proposed. The acid-catalyzed condensation of the triethoxysilane pendant groups of triethoxysilane-functionalized polybutadiene chains at the air/water interface successfully led to the formation of an insoluble crosslinked material which could be directly removed from the water surface. The efficiency of the cross-linking reaction was demonstrated through surface pressure measurements such as surface pressure-mean molecular area isotherms recorded at different reaction times and isobar experiments for different subphase pH values. The evolution of the monolayer topography during cross-linking was studied by atomic force microscopy imaging of the Langmuir-Blodgett films.

Polystyrene-b-poly(tert-butyl acrylate) and polystyrene-b-poly(acrylic acid) dendrimer-like copolymers: two-dimensional self-assembly at the air-water interface.

The two-dimensional self-assembly at the air/water (A/W) interface of two dendrimer-like copolymers based on polystyrene and poly(tert-butyl acrylate) (PS-b-PtBA) or poly(acrylic acid) (PS-b-PAA) was investigated through surface pressure measurements (isotherms, isochores, and compression-expansion hysteresis experiments) and atomic force microscopy (AFM) imaging. The two dendrimer-like block copolymers have an 8-arm PS core (Mn = 10 000 g/mol, approximately 12 styrene repeat units per arm) with a 16-arm PtBA (Mn = 230 000 g/mol, approximately 112 tert-butyl acrylate repeat units per arm) or PAA (Mn = 129 000 g/mol, approximately 112 acrylic acid repeat units per arm) corona. The PS-b-PtBA sample forms stable Langmuir monolayers and aggregates into circular surface micelles up to a plateau observed in the corresponding isotherm around 24 mN/m. Beyond this threshold, the monolayers collapse above the interface, resulting in the formation of large and irregular desorbed aggregates. The PS-b-PAA sample has ionizable carboxylic acid groups, and its A/W interfacial self-assembly was therefore investigated for various subphase pH values. Under basic conditions (pH = 11), the carboxylic acid groups are deprotonated, and the PS-b-PAA sample is therefore highly water-soluble and does not form stable monolayers, instead irreversibly dissolving in the aqueous subphase. Under acidic conditions (pH = 2.5), the PS-b-PAA sample is less water-soluble and becomes surface-active. The pseudoplateau observed in the isotherm around 5 mN/m corresponds to a pancake-to-brush transition with the PAA chains dissolving in the water subphase and stretching underneath the anchoring PS cores. AFM imaging revealed the presence of circular surface micelles for low surface pressures, whereas the biphasic nature of the pseudoplateau region was confirmed with the gradual aggregation of the micellar PS cores above the PAA chains. The aggregation numbers for both samples were estimated around 3-5 dendrimer-like copolymers per circular surface micelle. These rather low values confirmed the tremendous influence of molecular architecture on the two-dimensional self-assembly of block copolymers.

Two-dimensional polymeric nanomaterials through cross-linking of polybutadiene-b-poly(ethylene oxide) monolayers at the air/water interface.

Two-dimensional polymeric nanomaterials consisting of a continuously cross-linked polybutadiene (PB) two-dimensional network with poly(ethylene oxide) (PEO) domains of controlled sizes trapped within the PB network were synthesized. To reach that goal, novel (PB(Si(OEt)3)-b-PEO)3 star block copolymers were designed by hydrosilylation of the pendant double bonds of (PB-b-PEO)3 star block copolymer precursors with triethoxysilane. The (PB(Si(OEt)3)-b-PEO)3 star block copolymers were characterized by 1H NMR and IR spectroscopy. Self-condensation of the triethoxysilane pendant groups under acidic conditions led to a successful cross-linking of the polybutadiene blocks directly at the air/water interface without any additives or reagents. This strategy was found more efficient than radical cross-linking of (PB-b-PEO)3 with AIBN to get a homogeneously cross-linked monolayer of controlled and fixed morphology as demonstrated by the easy mechanical removal of the cross-linked Langmuir film from the water surface. As shown by AFM imaging, this strategy allows the accurate control of the PEO "pore" size depending on the monolayer surface pressure applied during the cross-linking reaction. The subphase pH and surface pressure influence on the cross-linking kinetics and monolayer morphologies were investigated by Langmuir trough studies (isotherm and isobar experiments) and AFM imaging.

High performance poly(styrene-b-diene-b-styrene) triblock copolymers from a hydrocarbon-soluble and additive-free dicarbanionic initiator.

A new hydrocarbon-soluble (additive-free) dicarbanionic organolithium initiator, obtained by a simple halogen-lithium exchange reaction (Gilman's reaction) from a diarylhalide containing a side C15 alkyl chain, has been designed and used to initiate the anionic polymerization of butadiene and styrene. The dilithiated species formed afford well-defined poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymers with a high percentage of 1,4-microstructure polybutadiene (91%) and excellent mechanical properties, such as ultimate tensile strength higher than 30 MPa and elongation at a break of 1000%. This represents a breakthrough in the synthesis of SBS polymers, one of the most used thermoplastic elastomers.