Fs-laser scissors for photobleaching, ablation in fixed samples and living cells, and studies of cell mechanics.

The use of ultrashort laser pulses for microscopy has steadily increased over the past years. In this so-called multiphoton microscopy, laser pulses with pulse duration around 100 femtoseconds (fs) are used to excite fluorescence within the samples. Due to the high peak powers of fs lasers, the absorption mechanism of the laser light is based on nonlinear absorption. Therefore, the fluorescence signal is highly localized within the bulk of biological materials, similar to a confocal microscope. However, this nonlinear absorption mechanism can not only be used for imaging but for selective alteration of the material at the laser focus: The absorption can on one hand lead to the excitation of fluorescent molecules of fluorescently tagged cells by the simultaneous absorption of two or three photons or on the other hand, in case of higher order processes, to the creation of free-electron plasmas and, consequently, plasma-mediated ablation. Typical imaging powers are in the range of tens of milliwatts using 100-fs pulses at a repetition rate of 80-90 MHz, while pulse energies needed for ablation powers are as low as a few nanojoules when using high numerical aperture microscope objectives for focusing the laser radiation into the sample. Since the first demonstration of this technique, numerous applications of fs lasers have emerged within the field of cellular biology and microscopy. As the typical wavelengths of ultrashort laser systems lie in the near infrared between 800 and 1000 nm, high penetration depth can be achieved and can provide the possibility of imaging and manipulating the biological samples with one single laser system.

Viscoelastic retraction of single living stress fibers and its impact on cell shape, cytoskeletal organization, and extracellular matrix mechanics.

Cells change their form and function by assembling actin stress fibers at their base and exerting traction forces on their extracellular matrix (ECM) adhesions. Individual stress fibers are thought to be actively tensed by the action of actomyosin motors and to function as elastic cables that structurally reinforce the basal portion of the cytoskeleton; however, these principles have not been directly tested in living cells, and their significance for overall cell shape control is poorly understood. Here we combine a laser nanoscissor, traction force microscopy, and fluorescence photobleaching methods to confirm that stress fibers in living cells behave as viscoelastic cables that are tensed through the action of actomyosin motors, to quantify their retraction kinetics in situ, and to explore their contribution to overall mechanical stability of the cell and interconnected ECM. These studies reveal that viscoelastic recoil of individual stress fibers after laser severing is partially slowed by inhibition of Rho-associated kinase and virtually abolished by direct inhibition of myosin light chain kinase. Importantly, cells cultured on stiff ECM substrates can tolerate disruption of multiple stress fibers with negligible overall change in cell shape, whereas disruption of a single stress fiber in cells anchored to compliant ECM substrates compromises the entire cellular force balance, induces cytoskeletal rearrangements, and produces ECM retraction many microns away from the site of incision; this results in large-scale changes of cell shape (> 5% elongation). In addition to revealing fundamental insight into the mechanical properties and cell shape contributions of individual stress fibers and confirming that the ECM is effectively a physical extension of the cell and cytoskeleton, the technologies described here offer a novel approach to spatially map the cytoskeletal mechanics of living cells on the nanoscale.

Subwavelength-diameter silica wires for low-loss optical wave guiding.

Silica waveguides with diameters larger than the wavelength of transmitted light are widely used in optical communications, sensors and other applications. Minimizing the width of the waveguides is desirable for photonic device applications, but the fabrication of low-loss optical waveguides with subwavelength diameters remains challenging because of strict requirements on surface roughness and diameter uniformity. Here we report the fabrication of subwavelength-diameter silica 'wires' for use as low-loss optical waveguides within the visible to near-infrared spectral range. We use a two-step drawing process to fabricate long free-standing silica wires with diameters down to 50 nm that show surface smoothness at the atomic level together with uniformity of diameter. Light can be launched into these wires by optical evanescent coupling. The wires allow single-mode operation, and have an optical loss of less than 0.1 dB mm(-1). We believe that these wires provide promising building blocks for future microphotonic devices with subwavelength-width structures.