Amplitude noise suppression in Yb:doped NALM oscillators utilizing saturable absorber settings.

Optical frequency combs based on fiber lasers mode-locked (ML) with a nonlinear amplifying loop mirror (NALM) have become the backbone of many cutting-edge applications, ranging from precision spectroscopy to quantum physics. Being extremely precise measurement tools, understanding their passive stability and low-noise operation regimes is vital. While several influences on the laser noise have been studied, many parameters remain poorly understood. Here, we systematically analyze under which preconditions the artificial saturable absorber settings of the laser can be modified during operation without losing mode-locking and the effects on laser noise, the spectrum and the output power. Our results show that it is possible to decrease the amplitude noise (AM noise) of the laser by more than 50 % by simply rotating a wave plate within the laser cavity. Additionally, we discuss differences to a similar effect observed in a NALM-alike laser amplifier and of changing the output coupling. These findings deepen our understanding and capabilities of optimizing the noise performance of ML fiber lasers, enable us to investigate new parameter spaces, and can be used to further optimize the noise performance of the NALM laser design, making it an ideal light source for advanced setups both in research and industry.

Simple approach for extending the ambiguity-free range of dual-comb ranging.

Dual-comb (DC) ranging is an established method for high-precision and high-accuracy distance measurements. It is, however, restricted by an inherent length ambiguity and the requirement for complex control loops for comb stabilization. Here, we present a simple approach for expanding the ambiguity-free measurement length of DC ranging by exploiting the intrinsic intensity modulation of a single-cavity dual-color DC for simultaneous time-of-flight and DC distance measurements. This measurement approach enables the measurement of distances up to several hundred kilometers with the precision and accuracy of a DC interferometric setup while providing a high data acquisition rate (≈2kHz) and requiring only the repetition rate of one of the combs to be stabilized.

Flexible all-PM NALM Yb:fiber laser design for frequency comb applications: operation regimes and their noise properties.

We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a 78-MHz configuration at different intracavity group delay dispersion (GDD) values ranging from anomalous (-0.035 ps2) to normal (+0.015 ps2). We put a particular focus on the characterization of the intensity noise as well as the free-running linewidth of the carrier-envelope-offset (CEO) frequency as a function of the different operation regimes. We observe that operation points far from the spontaneous emission peak of Yb (∼1030 nm) and close to zero intracavity dispersion can be found, where the influence of pump noise is strongly suppressed. For such an operation point, we show that a CEO linewidth of less than 10-kHz at 1 s integration can be obtained without any active stabilization.

Performance scaling of a 10-GHz solid-state laser enabling self-referenced CEO frequency detection without amplification.

A simple and compact straight-cavity laser oscillator incorporating a cascaded quadratic nonlinear crystal and a semiconductor saturable absorber mirror (SESAM) can deliver stable femtosecond modelocking at high pulse repetition rates >10 GHz. In this paper, we experimentally investigate the influence of intracavity dispersion, pump brightness, and cavity design on modelocking with high repetition rates, and use the resulting insights to demonstrate a 10.4-GHz straight-cavity SESAM-modelocked Yb:CALGO laser delivering 108-fs pulses with 812 mW of average output power. This result represents a record-level performance for diode-pumped femtosecond oscillators with repetition rates above 10 GHz. Using the oscillator output without any optical amplification, we demonstrate coherent octave-spanning supercontinuum generation (SCG) in a silicon nitride waveguide. Subsequent f-to-2f interferometry with a periodically poled lithium niobate waveguide enables the detection of a strong carrier-envelope offset (CEO) beat note with a 33-dB signal-to-noise ratio.

Engajamento e Protagonismo Estudantil na Promoção da Educação Médica em Tempos de Pandemia da Covid-19 / Students Engagement and Protagonism in the Promotion of Medical Education During the Covid-19 Pandemic

Resumo: Introdução: Este artigo relata as experiências da representação estudantil da Faculdade de Medicina de uma universidade federal brasileira, incluindo organização de eventos, participação nas decisões em instâncias superiores e interrupção do ensino em uma pandemia. Relato de Experiência: Inicialmente, houve a mobilização do movimento estudantil para regulamentar as atividades remotas. Em seguida, outras instituições da universidade movimentaram-se para regulamentar as atividades acadêmicas remotas emergenciais. Por fim, realizou-se um evento para informar aos estudantes os planos para a implementação dessas atividades e dialogar sobre questões da educação médica nesse contexto. Discussão: A importância da integração das instituições de representação estudantil com órgãos superiores é notável e ocorre pela proatividade dos(as) alunos(as) e pelo consenso com docentes e técnicos(as) administrativos(as). Foi preciso considerar o contexto socioeconômico dos envolvidos e manejar seus interesses. Assim, lidar com conflitos e propor soluções abrangentes foi fundamental para garantir, de forma democrática, condições viáveis para aplicação das atividades acadêmicas remotas emergenciais por meio da promoção da inclusão digital para professores(as). Além disso, criaram-se meios de assistências para os(as) estudantes. Portanto, percebeu-se o protagonismo dos(as) acadêmicos(as) na resolução de conflitos por meio da participação ativa em conselhos e realização de eventos informativos e consultivos destinados ao restante da comunidade, o que resultou também em pesquisa, extensão e atividades para a melhora da saúde mental no contexto atual. Conclusão: Percebe-se que a participação acadêmica nas deliberações da universidade possibilitou decisões mais democráticas que consideraram os impactos da pandemia na vida dos(as) estudantes e as futuras consequências na formação médica. Além disso, esse processo despertou o interesse da comunidade em atividades de gestão acadêmica.

Abstract: Introduction: This article reports on the experiences of student representation at the medical school of a Brazilian federal university, including organizing events, participating in decisions at higher levels and interrupting teaching during a pandemic. Experience Report: Initially, the students' movement was mobilized to regulate remote activities. Then other university institutions took action to regulate Emergency Remote Academic Activities. Finally, an event was held to inform students about plans for the implementation of these activities and to discuss medical education issues in this context. Discussion: The importance of the integration of student representation institutions with higher bodies is remarkable and occurs due to the students' proactivity and the consensus with teaching staff and administrative technicians. It was necessary to consider the socio-economic context of those involved and manage their interests. Therefore dealing with conflicts and proposing comprehensive solutions was fundamental in order to guarantee viable conditions for the democratic application of Emergency Remote Academic Activities, promoting digital inclusion for teachers and creating means of student assistance. Hence, it became clear that academics were playing a pivotal role in conflict resolution through active participation in councils and holding informative and consultative events for the rest of the community, which also promoted research, community outreach projects and activities to improve mental health in the current setting. Conclusion: It can be seen that academic participation in university deliberations enabled more democratic decisions that considered the impacts of the pandemic on the lives of students and its future consequences on medical training. It furthermore sparked community interest in academic management activities.

Tunable dual-comb from an all-polarization-maintaining single-cavity dual-color Yb:fiber laser.

We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions that can be independently mode-locked. Spectral overlap of the two pulse trains is achieved outside the laser cavity by amplifying the 1030-nm pulses and broadening them in a nonlinear fiber. Spatially overlapping the two arms on a simple photodiode then generates a down-converted radio frequency comb. The difference in repetition rates between the two pulse trains and hence the line spacing of the down-converted comb can easily be tuned in this setup. This feature allows for a flexible adjustment of the tradeoff between non-aliasing bandwidth vs. measurement time in spectroscopy applications. Furthermore, we show that by fine-tuning the center-wavelengths of the two pulse trains, we are able to shift the down-converted frequency comb along the radio-frequency axis. The usability of this dual-comb setup is demonstrated by measuring the transmission of two different etalons while the laser is completely free-running.

Tunable dual-color operation of Yb:fiber laser via mechanical spectral subdivision.

We present a versatile method to generate a dual-color laser from a single fiber laser cavity by spectral subdivision using a tunable mechanical filter. As a proof-of-principle, we implement the concept in a nonlinear polarization evolution (NPE)-mode-locked ytterbium (Yb)-fiber laser. The division into two independent spectral regions is achieved by inserting a narrow blade-shaped beam block into the free-space grating compressor section of the cavity, where the spectrum is spatially dispersed. By mode-locking both spectral regions, two pulse trains, with different repetition rates around 23 MHz, are generated. Each pulse train has a FWHM of ~10 nm. The method presented here enables tuning of the difference in repetition rate as well as the spectral separation of the two independent pulse trains. The difference in repetition rates originates from intracavity dispersion and can be tuned over a large range (650 Hz - 3 kHz in this setup) by changing the length of the grating compressor. By changing the effective width of the beam block the spectral separation can be dynamically adjusted. This approach's simplicity holds great promises for the development of single-cavity dual-comb lasers featuring tunable sampling rates.

Carrier-envelope offset stabilization of a GHz repetition rate femtosecond laser using opto-optical modulation of a SESAM.

We demonstrate, to the best of our knowledge, the first carrier-envelope offset (CEO) frequency stabilization of a GHz femtosecond laser based on opto-optical modulation (OOM) of a semiconductor saturable absorber mirror (SESAM). The 1.05-GHz laser is based on a Yb:CALGO gain crystal and emits sub-100-fs pulses with 2.1-W average power at a center wavelength of 1055 nm. The SESAM plays two key roles: it starts and stabilizes the mode-locking operation and is simultaneously used as an actuator to control the CEO frequency. This second functionality is implemented by pumping the SESAM with a continuous-wave 980-nm laser diode in order to slightly modify its nonlinear reflectivity. We use the standard f-to-2f method for detection of the CEO frequency, which is stabilized by applying a feedback signal to the current of the SESAM pump diode. We compare the SESAM-OOM stabilization with the traditional method of gain modulation via control of the pump power of the Yb:CALGO gain crystal. While the bandwidth for gain modulation is intrinsically limited to ∼250 kHz by the laser cavity dynamics, we show that the OOM provides a feedback bandwidth above 500 kHz. Hence, we were able to obtain a residual integrated phase noise of 430 mrad for the stabilized CEO beat, which represents an improvement of more than 30% compared to gain modulation stabilization.

Full stabilization and characterization of an optical frequency comb from a diode-pumped solid-state laser with GHz repetition rate.

We demonstrate the first self-referenced full stabilization of a diode-pumped solid-state laser (DPSSL) frequency comb with a GHz repetition rate. The Yb:CALGO DPSSL delivers an average output power of up to 2.1 W with a typical pulse duration of 96 fs and a center wavelength of 1055 nm. A carrier-envelope offset (CEO) beat with a signal-to-noise ratio of 40 dB (in 10-kHz resolution bandwidth) is detected after supercontinuum generation and f-to-2f interferometry directly from the output of the oscillator, without any external amplification or pulse compression. The repetition rate is stabilized to a reference synthesizer with a residual integrated timing jitter of 249 fs [10 Hz - 1 MHz] and a relative frequency stability of 10-12/s. The CEO frequency is phase-locked to an external reference via pump current feedback using home-built modulation electronics. It achieves a loop bandwidth of ~150 kHz, which results in a tight CEO lock with a residual integrated phase noise of 680 mrad [1 Hz - 1 MHz]. We present a detailed characterization of the GHz frequency comb that combines a noise analysis of the repetition rate frep, of the CEO frequency fCEO, and of an optical comb line at 1030 nm obtained from a virtual beat with a narrow-linewidth laser at 1557 nm using a transfer oscillator. An optical comb linewidth of about 800 kHz is assessed at 1-s observation time, for which the dominant noise sources of frep and fCEO are identified.

Gigahertz frequency comb offset stabilization based on supercontinuum generation in silicon nitride waveguides.

Silicon nitride (Si3N4) waveguides represent a novel photonic platform that is ideally suited for energy efficient and ultrabroadband nonlinear interactions from the visible to the mid-infrared. Chip-based supercontinuum generation in Si3N4 offers a path towards a fully-integrated and highly compact comb source for sensing and time-and-frequency metrology applications. We demonstrate the first successful frequency comb offset stabilization that utilizes a Si3N4 waveguide for octave-spanning supercontinuum generation and achieve the lowest integrated residual phase noise of any diode-pumped gigahertz laser comb to date. In addition, we perform a direct comparison to a standard silica photonic crystal fiber (PCF) using the same ultrafast solid-state laser oscillator operating at 1 µm. We identify the minimal role of Raman scattering in Si3N4 as a key benefit that allows to overcome the fundamental limitations of silica fibers set by Raman-induced self-frequency shift.

Octave-spanning coherent supercontinuum generation in a silicon nitride waveguide.

We demonstrate the generation of a supercontinuum spanning more than 1.4 octaves in a silicon nitride waveguide using sub-100-fs pulses at 1 µm generated by either a 53-MHz, diode-pumped ytterbium (Yb) fiber laser or a 1-GHz, Yb:CaAlGdO(4) (Yb:CALGO) laser. Our numerical simulations show that the broadband supercontinuum is fully coherent, and a spectral interference measurement is used to verify that the supercontinuum generated with the Yb:CALGO laser possesses a high degree of coherence over the majority of its spectral bandwidth. This coherent spectrum may be utilized for optical coherence tomography, spectroscopy, and frequency metrology.

Gigahertz self-referenceable frequency comb from a semiconductor disk laser.

We present a 1.75-GHz self-referenceable frequency comb from a vertical external-cavity surface-emitting laser (VECSEL) passively modelocked with a semiconductor saturable absorber mirror (SESAM). The VECSEL delivers 231-fs pulses with an average power of 100 mW and is optimized for stable and reliable operation. The optical spectrum was centered around 1038 nm and nearly transform-limited with a full width half maximum (FWHM) bandwidth of 5.5 nm. The pulses were first amplified to an average power of 5.5 W using a backward-pumped Yb-doped double-clad large mode area (LMA) fiber and then compressed to 85 fs with 2.2 W of average power with a passive LMA fiber and transmission gratings. Subsequently, we launched the pulses into a highly nonlinear photonic crystal fiber (PCF) and generated a coherent octave-spanning supercontinuum (SC). We then detected the carrier-envelope offset (CEO) frequency (f(CEO)) beat note using a standard f-to-2f-interferometer. The f(CEO) exhibits a signal-to-noise ratio of 17 dB in a 100-kHz resolution bandwidth and a FWHM of ≈10 MHz. To our knowledge, this is the first report on the detection of the f(CEO) from a semiconductor laser, opening the door to fully stabilized compact frequency combs based on modelocked semiconductor disk lasers.

D3, the new diffractometer for the macromolecular crystallography beamlines of the Swiss Light Source.

A new diffractometer for microcrystallography has been developed for the three macromolecular crystallography beamlines of the Swiss Light Source. Building upon and critically extending previous developments realised for the high-resolution endstations of the two undulator beamlines X06SA and X10SA, as well as the super-bend dipole beamline X06DA, the new diffractometer was designed to the following core design goals. (i) Redesign of the goniometer to a sub-micrometer peak-to-peak cylinder of confusion for the horizontal single axis. Crystal sizes down to at least 5 µm and advanced sample-rastering and scanning modes are supported. In addition, it can accommodate the new multi-axis goniometer PRIGo (Parallel Robotics Inspired Goniometer). (ii) A rapid-change beam-shaping element system with aperture sizes down to a minimum of 10 µm for microcrystallography measurements. (iii) Integration of the on-axis microspectrophotometer MS3 for microscopic sample imaging with 1 µm image resolution. Its multi-mode optical spectroscopy module is always online and supports in situ UV/Vis absorption, fluorescence and Raman spectroscopy. (iv) High stability of the sample environment by a mineral cast support construction and by close containment of the cryo-stream. Further features are the support for in situ crystallization plate screening and a minimal achievable detector distance of 120 mm for the Pilatus 6M, 2M and the macromolecular crystallography group's planned future area detector Eiger 16M.