RESUMO
There have been significant advances in adhesive dentistry in recent decades, with efforts being made to improve the mechanical and bonding properties of resin-based dental adhesive materials. Various attempts have been made to achieve versatility, introducing functional monomers and silanes into the materials' composition to enable the chemical reaction with tooth structure and restorative materials and a multimode use. The novel adhesive materials also tend to be simpler in terms of clinical use, requiring reduced number of steps, making them less technique sensitive. However, these materials must also be reliable and have a long-lasting bond with different substrates. In order to fulfill these arduous tasks, different chemical constituents and different techniques are continuously being developed and introduced into dental adhesive materials. This critical review aims to discuss the concepts behind novel monomers, bioactive molecules, and alternative techniques recently implemented in adhesive dentistry. Incorporating monomers that are more resistant to hydrolytic degradation and functional monomers that enhance the micromechanical retention and improve chemical interactions between adhesive resin materials and various substrates improved the performance of adhesive materials. The current trend is to blend bioactive molecules into adhesive materials to enhance the mechanical properties and prevent endogenous enzymatic degradation of the dental substrate, thus ensuring the longevity of resin-dentin bonds. Moreover, alternative etching materials and techniques have been developed to address the drawbacks of phosphoric acid dentin etching. Altogether, we are witnessing a dynamic era in adhesive dentistry, with advancements aiming to bring us closer to simple and reliable bonding. However, simplification and novelty should not be achieved at the expense of material properties.
Assuntos
Colagem Dentária , Cimentos Dentários , Cimentos Dentários/química , Colagem Dentária/métodos , Cimentos de Resina/química , Condicionamento Ácido do Dente/métodos , Materiais Dentários/química , Teste de Materiais , Adesivos Dentinários/química , Dentina/química , Resinas CompostasRESUMO
OBJECTIVES: To evaluate the effects of microorganisms' contamination inside the dispensing syringes of different types of resin-based composites (RBCs). METHODS: This study encompassed two sections. First, an anonymous electronic survey was submitted via Google forms to Italian dentists to acquire information about composite handling during clinical procedures. Then, a bench test was performed on nanohybrid RBCs differing in matrix chemistry and fillers [FiltekTM Supreme XTE (3MTM); Venus Pearl (Kulzer GmbH); Admira Fusion x-tra (Voco)] to evaluate the microbial viability on their surfaces with/out photocuring. Uncured RBCs were exposed to standardized inocula of Streptococcus Mutans, Candida Albicans, Lactobacillus Rhamnosus, or mixt plaque in an in vitro model reproducing clinical restorative procedures. Half of the RBC specimens were cured after exposure. Microbial viability was assessed using an MTT-based test. Statistical analysis included three-way ANOVA and Tukey's tests (p<0.05). RESULTS: Among 300 dentists completing the survey, the majority declared to use the spatula to carry the RBCs from the syringe to the dental cavity (50% same spatula; 35% two spatulas). However, 80% of respondents had personal feelings that using one spatula could be a source of cross-contamination. In vitro results using one spatula showed microbial contamination of all RBCs after one hour of storage. The contamination levels depended on the used strain and RBC type (p<0.0001), but photocuring did not reduce contamination (p = 0.2992). CONCLUSIONS: Microbial species' viability on uncured RBCs and after photocuring shows the existence of a considerable risk of cross-infection. Clinical procedures in Restorative Dentistry need to acknowledge and to reduce such risk during RBCs handling. CLINICAL SIGNIFICANCE: Dentists must be aware of the possibility of cross-infection during restorative procedures, especially when the same spatula is repeatedly used for placing RBC in the cavity.
Assuntos
Resinas Compostas , Materiais Dentários , Teste de Materiais , Streptococcus mutansRESUMO
Carbodiimide (EDC)-based dentin primers preserve hybrid layer (HL) integrity. However, aging >1 y has not been investigated. The present study examined whether the cross-linking effect of EDC was reflected in dentin bond strength, endogenous enzymatic activity, and the chemical profile of the HL after 5-y aging in artificial saliva. Noncarious human third molars (N = 42) were cut to expose middle/deep coronal dentin and treated as follows: group 1, dentin etched with 35% H3PO4, pretreated with a 0.3M aqueous EDC primer for 1 min and restored with XP Bond (Dentsply Sirona); group 2, as in group 1 but without EDC pretreatment; group 3, Clearfil SE Bond (Kuraray-Noritake) primer applied to dentin surface, followed by EDC pretreatment as in group 1 and application of bond; group 4, as in group 3 without EDC pretreatment. After composite buildup, the specimens were cut into sticks or slabs, depending on the experiment. All tests were performed at baseline (T0) and after 5 y of aging (T5) in artificial saliva at 37 °C. Microtensile bond strength (µTBS) was tested at a crosshead speed of 1 mm/min until failure. Endogenous enzymatic activity was investigated with in situ zymography. The chemical profile of HL was determined via Raman spectroscopy. Three-way analysis of variance and post hoc Tukey test were used to analyze µTBS and in situ zymography data (α = 0.05). EDC pretreatment and aging significantly influenced µTBS and in situ zymography results (P < 0.05). Higher bond strength and lower gelatinolytic activity were identified in the EDC-treated groups at T5 (P < 0.05), especially in the etch-and-rinse groups. Raman spectra revealed less defined amide III peaks in control specimens at T5. The EDC cross-linking effect persisted in the HL for 5 y in terms of bond strength, collagen structure preservation, and dentinal enzyme silencing.
Assuntos
Carbodi-Imidas , Colagem Dentária , Resinas Compostas , Dentina , Adesivos Dentinários , Humanos , Teste de Materiais , Cimentos de Resina , Resistência à TraçãoRESUMO
Resin cement diffusion into dentin may differ as a function of the pre-treatment regimen. Since self-adhesive cements do not require substrate pre-treatment for luting, penetration of and interaction with the underlying dentin are questioned. We hypothesized that differences in the resin cement diffusion into dentin may exist among current commercial adhesive cements. Composite cylinders were luted on mid-coronal dentinal surfaces by an etch-and-rinse cement (Calibra), a self-etching system (Panavia F 2.0), and 4 self-adhesive cements (Multilink Sprint, Rely X Unicem, G-Cem, Bis-Cem). Dentin/cement interfacial characteristics were analyzed by a staining technique (Masson's trichrome) and by scanning electron microscopy. Conventional acid etching resulted in partially infiltrated adhesive interfaces differing from those achieved with the application of self-etching primer. No hybrid layer and/or resin tag formation was detectable at the interfaces bonded with self-adhesive cements. Limited decalcification/infiltration was observed for self-adhesive cements into the underlying dentin. Self-adhesive cements were not able to demineralize/dissolve the smear layer completely.
Assuntos
Corrosão Dentária/métodos , Adesivos Dentinários , Dentina/efeitos dos fármacos , Cimentos de Resina , Desmineralização do Dente , Permeabilidade da Dentina , Difusão , Humanos , Microscopia Eletrônica de Varredura , Camada de EsfregaçoRESUMO
The chemo-mechanical surface treatment of fiber posts increases their bonding properties. The combined use of atomic force and confocal microscopy allows for the assessment and quantification of the changes on surface roughness that justify this behavior. Quartz fiber posts were conditioned with different chemicals, as well as by sandblasting, and by an industrial silicate/silane coating. We analyzed post surfaces by atomic force microscopy, recording average roughness (R(a)) measurements of fibers and resin matrix. A confocal image profiler allowed for the quantitative assessment of the average superficial roughness (R(a)). Hydrofluoric acid, potassium permanganate, sodium ethoxide, and sandblasting increased post surface roughness. Modifications of the epoxy resin matrix occurred after the surface pre-treatments. Hydrofluoric acid affected the superficial texture of quartz fibers. Surface-conditioning procedures that selectively react with the epoxy-resin matrix of the fiber post enhance roughness and improve the surface area available for adhesion by creating micro-retentive spaces without affecting the post's inner structure.