Classification and Evaluation of Octopus-Inspired Suction Cups for Soft Continuum Robots.

The emergence of the field of soft robotics has led to an interest in suction cups as auxiliary structures on soft continuum arms to support the execution of manipulation tasks. This application poses demanding requirements on suction cups with respect to sensorization, adhesion under non-ideal contact conditions, and integration into fully soft systems. The octopus can serve as an important source of inspiration for addressing these challenges. This review aims to accelerate research in octopus-inspired suction cups by providing a detailed analysis of the octopus sucker, determining meaningful performance metrics for suction cups on the basis of this analysis, and evaluating the state-of-the-art in suction cups according to these performance metrics. In total, 47 records describing suction cups are found, classified according to the deployed actuation method, and evaluated on performance metrics reflecting the level of sensorization, adhesion, and integration. Despite significant advances in recent years, the octopus sucker outperforms all suction cups on all performance metrics. The realization of high resolution tactile sensing in suction cups and the integration of such sensorized suction cups in soft continuum structures are identified as two major hurdles toward the realization of octopus-inspired manipulation strategies in soft continuum robot arms.

Charge generation by passive plant leaf motion at low wind speeds: design and collective behavior of plant-hybrid energy harvesters.

Energy harvesting techniques can exploit even subtle passive motion like that of plant leaves in wind as a consequence of contact electrification of the leaf surface. The effect is strongly enhanced by artificial materials installed as 'artificial leaves' on the natural leaves creating a recurring mechanical contact and separation. However, this requires a controlled mechanical interaction between the biological and the artificial component during the complex wind motion. Here, we build and test four artificial leaf designs with varying flexibility and degrees of freedom across the blade operating onNerium oleanderplants. We evaluate the apparent contact area (up to 10 cm2per leaf), the leaves' motion, together with the generated voltage, current and charge in low wind speeds of up to 3.3 m s-1and less. Single artificial leaves produced over 75 V and 1µA current peaks. Softer artificial leaves increase the contact area accessible for energy conversion, but a balance between softer and stiffer elements in the artificial blade is optimal to increase the frequency of contact-separation motion (here up to 10 Hz) for energy conversion also below 3.3 m s-1. Moreover, we tested how multiple leaves operating collectively during continuous wind energy harvesting over several days achieve a root mean square power of ∼6µW and are capable to transfer ∼80µC every 30-40 min to power a wireless temperature and humidity sensor autonomously and recurrently. The results experimentally reveal design strategies for energy harvesters providing autonomous micro power sources in plant ecosystems for example for sensing in precision agriculture and remote environmental monitoring.

Soft Robotics: A Route to Equality, Diversity, and Inclusivity in Robotics.

Robotics is entering our daily lives. The discipline is increasingly crucial in fields such as agriculture, medicine, and rescue operations, impacting our food, health, and planet. At the same time, it is becoming evident that robotic research must embrace and reflect the diversity of human society to address these broad challenges effectively. In recent years, gender inclusivity has received increasing attention, but it still remains a distant goal. In addition, awareness is rising around other dimensions of diversity, including nationality, religion, and politics. Unfortunately, despite the efforts, empirical evidence shows that the field has still a long way to go before achieving a sufficient level of equality, diversity, and inclusion across these spectra. This study focuses on the soft robotics community-a growing and relatively recent subfield-and it outlines the present state of equality and diversity panorama in this discipline. The article argues that its high interdisciplinary and accessibility make it a particularly welcoming branch of robotics. We discuss the elements that make this subdiscipline an example for the broader robotic field. At the same time, we recognize that the field should still improve in several ways and become more inclusive and diverse. We propose concrete actions that we believe will contribute to achieving this goal, and provide metrics to monitor its evolution.

A Biohybrid Self-Dispersing Miniature Machine Using Wild Oat Fruit Awns for Reforestation and Precision Agriculture.

Advances in bioinspired and biohybrid robotics are enabling the creation of multifunctional systems able to explore complex unstructured environments. Inspired by Avena fruits, a biohybrid miniaturized autonomous machine (HybriBot) composed of a biomimetic biodegradable capsule as cargo delivery system and natural humidity-driven sister awns as biological motors is reported. Microcomputed tomography, molding via two-photon polymerization and casting of natural awns into biodegradable materials is employed to fabricate multiple HybriBots capable of exploring various soil and navigating soil irregularities, such as holes and cracks. These machines replicate the dispersal movements and biomechanical performances of natural fruits, achieving comparable capsule drag forces up to ≈0.38 N and awns torque up to ≈100 mN mm-1. They are functionalized with fertilizer and are successfully utilized to germinate selected diaspores. HybriBots function as self-dispersed systems with applications in reforestation and precision agriculture.

A growing soft robot with climbing plant-inspired adaptive behaviors for navigation in unstructured environments.

Self-growing robots are an emerging solution in soft robotics for navigating, exploring, and colonizing unstructured environments. However, their ability to grow and move in heterogeneous three-dimensional (3D) spaces, comparable with real-world conditions, is still developing. We present an autonomous growing robot that draws inspiration from the behavioral adaptive strategies of climbing plants to navigate unstructured environments. The robot mimics climbing plants' apical shoot to sense and coordinate additive adaptive growth via an embedded additive manufacturing mechanism and a sensorized tip. Growth orientation, comparable with tropisms in real plants, is dictated by external stimuli, including gravity, light, and shade. These are incorporated within a vector field method to implement the preferred adaptive behavior for a given environment and task, such as growth toward light and/or against gravity. We demonstrate the robot's ability to navigate through growth in relation to voids, potential supports, and thoroughfares in otherwise complex habitats. Adaptive twining around vertical supports can provide an escape from mechanical stress due to self-support, reduce energy expenditure for construction costs, and develop an anchorage point to support further growth and crossing gaps. The robot adapts its material printing parameters to develop a light body and fast growth to twine on supports or a tougher body to enable self-support and cross gaps. These features, typical of climbing plants, highlight a potential for adaptive robots and their on-demand manufacturing. They are especially promising for applications in exploring, monitoring, and interacting with unstructured environments or in the autonomous construction of complex infrastructures.

A printed luminescent flier inspired by plant seeds for eco-friendly physical sensing.

Continuous and distributed monitoring of environmental parameters may pave the way for developing sustainable strategies to tackle climate challenges. State-of-the-art technologies, made with electronic systems, are often costly, heavy, and generate e-waste. Here, we propose a new generation of self-deployable, biocompatible, and luminescent artificial flying seeds for wireless, optical, and eco-friendly monitoring of environmental parameters (i.e., temperature). Inspired by natural Acer campestre plant seeds, we developed three-dimensional functional printed luminescent seed-like fliers, selecting polylactic acid as a biocompatible matrix and temperature as a physical parameter to be monitored. The artificial seeds mimic the aerodynamic and wind dispersal performance of the natural ones. The sensing properties are given by the integration of fluorescent lanthanide-doped particles, whose photoluminescence properties depend on temperature. The luminescent artificial flying seeds can be optically read from a distance using eye-safe near-infrared wavelengths, thus acting as a deployable sensor for distributed monitoring of topsoil environmental temperatures.

Towards the optimization of passive undulatory locomotion on land: mathematical and physical models.

The current study investigates the body-environment interaction and exploits the passive viscoelastic properties of the body to perform undulatory locomotion. The investigations are carried out using a mathematical model based on a dry frictional environment, and the results are compared with the performance obtained using a physical model. The physical robot is a wheel-based modular system with flexible joints moving on different substrates. The influence of the spatial distribution of body stiffness on speed performance is also investigated. Our results suggest that the environment affects the performance of undulatory locomotion based on the distribution of body stiffness. While stiffness may vary with the environment, we have established a qualitative constitutive law that holds across environments. Specifically, we expect the stiffness distribution to exhibit either an ascending-descending or an ascending-plateau pattern along the length of the object, from head to tail. Furthermore, undulatory locomotion showed sensitivity to contact mechanics: solid-solid or solid-viscoelastic contact produced different locomotion kinematics. Our results elucidate how terrestrial limbless animals achieve undulatory locomotion performance by exploiting the passive properties of the environment and the body. Application of the results obtained may lead to better performing long-segmented robots that exploit the suitability of passive body dynamics and the properties of the environment in which they need to move.

Innovative Nanostructured Fillers for Dental Resins: Nanoporous Alumina and Titania Nanotubes.

The possibility of improving dental restorative materials is investigated through the addition of two different types of fillers to a polymeric resin. These fillers, consisting of porous alumina and TiO2 nanotubes, are compared based on their common physicochemical properties on the nanometric scale. The aim was to characterize and compare the surface morphological properties of composite resins with different types of fillers using analytical techniques. Moreover, ways to optimize the mechanical, surface, and aesthetic properties of reinforced polymer composites are discussed for applications in dental treatments. Filler-reinforced polymer composites are the most widely used materials in curing dental pathologies, although it remains necessary to optimize properties such as mechanical resistance, surface characteristics, and biocompatibility. Anodized porous alumina nanoparticles prepared by electrochemical anodization offer a route to improve mechanical properties and biocompatibility as well as to allow for the controlled release of bioactive molecules that can promote tissue integration and regeneration. The inclusion of TiO2 nanotubes prepared by hydrothermal treatment in the resin matrix promotes the improvement of mechanical and physical properties such as strength, stiffness, and hardness, as well as aesthetic properties such as color stability and translucency. The surface morphological properties of composite resins with anodized porous alumina and TiO2 nanotube fillers were characterized by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), and X-ray chemical analysis. In addition, the stress-strain behavior of the two composite resins is examined in comparison with enamel and dentin.

3D-printed hierarchical arrangements of actuators mimicking biological muscular architectures.

Being able to imitate the sophisticated muscular architectures that characterize the animal kingdom in biomimetic machines would allow them to perform articulated movements with the same naturalness. In soft robotics, multiple actuation technologies have been developed to mimic the contraction of a single natural muscle, but a few of them can be implemented in complex architectures capable of diversifying deformations and forces. In this work, we present three different biomimetic muscle architectures, i.e., fusiform, parallel, and bipennate, which are based on hierarchical arrangements of multiple pneumatic actuators. These biomimetic architectures are monolithic structures composed of thirty-six pneumatic actuators each, directly 3D printed through low-cost printers and commercial materials without any assembly phase. The considerable number of actuators involved enabled the adoption and consequent comparison of two regulation strategies: one based on input modulation, commonly adopted in pneumatic systems, and one based on fiber recruitment, mimicking the regulation behavior of natural muscles. The straightforward realization through additive manufacturing processes of muscle architectures regulated by fiber recruitment strategies facilitates the development of articulated muscular systems for biomimetics machines increasingly similar to the natural ones.

Soft robotics towards sustainable development goals and climate actions.

Soft robotics technology can aid in achieving United Nations' Sustainable Development Goals (SDGs) and the Paris Climate Agreement through development of autonomous, environmentally responsible machines powered by renewable energy. By utilizing soft robotics, we can mitigate the detrimental effects of climate change on human society and the natural world through fostering adaptation, restoration, and remediation. Moreover, the implementation of soft robotics can lead to groundbreaking discoveries in material science, biology, control systems, energy efficiency, and sustainable manufacturing processes. However, to achieve these goals, we need further improvements in understanding biological principles at the basis of embodied and physical intelligence, environment-friendly materials, and energy-saving strategies to design and manufacture self-piloting and field-ready soft robots. This paper provides insights on how soft robotics can address the pressing issue of environmental sustainability. Sustainable manufacturing of soft robots at a large scale, exploring the potential of biodegradable and bioinspired materials, and integrating onboard renewable energy sources to promote autonomy and intelligence are some of the urgent challenges of this field that we discuss in this paper. Specifically, we will present field-ready soft robots that address targeted productive applications in urban farming, healthcare, land and ocean preservation, disaster remediation, and clean and affordable energy, thus supporting some of the SDGs. By embracing soft robotics as a solution, we can concretely support economic growth and sustainable industry, drive solutions for environment protection and clean energy, and improve overall health and well-being.

4D Printing of Humidity-Driven Seed Inspired Soft Robots.

Geraniaceae seeds represent a role model in soft robotics thanks to their ability to move autonomously across and into the soil driven by humidity changes. The secret behind their mobility and adaptivity is embodied in the hierarchical structures and anatomical features of the biological hygroscopic tissues, geometrically designed to be selectively responsive to environmental humidity. Following a bioinspired approach, the internal structure and biomechanics of Pelargonium appendiculatum (L.f.) Willd seeds are investigated to develop a model for the design of a soft robot. The authors exploit the re-shaping ability of 4D printed materials to fabricate a seed-like soft robot, according to the natural specifications and model, and using biodegradable and hygroscopic polymers. The robot mimics the movement and performances of the natural seed, reaching a torque value of ≈30 µN m, an extensional force of ≈2.5 mN and it is capable to lift ≈100 times its own weight. Driven by environmental humidity changes, the artificial seed is able to explore a sample soil, adapting its morphology to interact with soil roughness and cracks.

Perspectives on Computation in Plants.

Plants thrive in virtually all natural and human-adapted environments and are becoming popular models for developing robotics systems because of their strategies of morphological and behavioral adaptation. Such adaptation and high plasticity offer new approaches for designing, modeling, and controlling artificial systems acting in unstructured scenarios. At the same time, the development of artifacts based on their working principles reveals how plants promote innovative approaches for preservation and management plans and opens new applications for engineering-driven plant science. Environmentally mediated growth patterns (e.g., tropisms) are clear examples of adaptive behaviors displayed through morphological phenotyping. Plants also create networks with other plants through subterranean roots-fungi symbiosis and use these networks to exchange resources or warning signals. This article discusses the functional behaviors of plants and shows the close similarities with a perceptron-like model that could act as a behavior-based control model in plants. We begin by analyzing communication rules and growth behaviors of plants; we then show how we translated plant behaviors into algorithmic solutions for bioinspired robot controllers; and finally, we discuss how those solutions can be extended to embrace original approaches to networking and robotics control architectures.

Mechanics and optimization of undulatory locomotion in different environments, tuning geometry, stiffness, damping and frictional anisotropy.

One of the oldest yet most common modalities of locomotion known among limbless animals is undulatory, also recognized for its stability compared to legged locomotion. Multiple forms of active mechanisms, e.g. active gait control, and passive mechanisms, e.g. body morphology and material properties, have adapted to different environments. The current research explores the passive role of body stiffness and internal losses in meeting terrain requirements. Furthermore, it addresses the influence of the environment on the resultant gait and how the interplay between various environments and body properties can lead to different speeds. We modelled undulatory locomotion in a dry friction environment where frictional anisotropy determines propulsion. We found that the body stiffness, the moment of inertia, the dry frictional coefficient ratio between normal and tangential frictional constants, and the internal damping of the body play an essential role in optimizing speed and animal adaptability to external conditions. Furthermore, we demonstrate that various known gaits like swimming, crawling and polychaete-like locomotion are achieved as a result of the interaction between body and environment parameters. Moreover, we validated the model by retrieving a corn snake's speed using data from the literature. This study demonstrates that the dependence between morphology, body material properties and environment can be exploited to design long-segmented robots to perform in specialized situations.

An earthworm-like modular soft robot for locomotion in multi-terrain environments.

Robotic locomotion in subterranean environments is still unsolved, and it requires innovative designs and strategies to overcome the challenges of burrowing and moving in unstructured conditions with high pressure and friction at depths of a few centimeters. Inspired by antagonistic muscle contractions and constant volume coelomic chambers observed in earthworms, we designed and developed a modular soft robot based on a peristaltic soft actuator (PSA). The PSA demonstrates two active configurations from a neutral state by switching the input source between positive and negative pressure. PSA generates a longitudinal force for axial penetration and a radial force for anchorage, through bidirectional deformation of the central bellows-like structure, which demonstrates its versatility and ease of control. The performance of PSA depends on the amount and type of fluid confined in an elastomer chamber, generating different forces and displacements. The assembled robot with five PSA modules enabled to perform peristaltic locomotion in different media. The role of friction was also investigated during experimental locomotion tests by attaching passive scales like earthworm setae to the ventral side of the robot. This study proposes a new method for developing a peristaltic earthworm-like soft robot and provides a better understanding of locomotion in different environments.

A perspective on plant robotics: from bioinspiration to hybrid systems.

As miscellaneous as the Plant Kingdom is, correspondingly diverse are the opportunities for taking inspiration from plants for innovations in science and engineering. Especially in robotics, properties like growth, adaptation to environments, ingenious materials, sustainability, and energy-effectiveness of plants provide an extremely rich source of inspiration to develop new technologies-and many of them are still in the beginning of being discovered. In the last decade, researchers have begun to reproduce complex plant functions leading to functionality that goes far beyond conventional robotics and this includes sustainability, resource saving, and eco-friendliness. This perspective drawn by specialists in different related disciplines provides a snapshot from the last decade of research in the field and draws conclusions on the current challenges, unanswered questions on plant functions, plant-inspired robots, bioinspired materials, and plant-hybrid systems looking ahead to the future of these research fields.

Wind dynamics and leaf motion: Approaching the design of high-tech devices for energy harvesting for operation on plant leaves.

High-tech sensors, energy harvesters, and robots are increasingly being developed for operation on plant leaves. This introduces an extra load which the leaf must withstand, often under further dynamic forces like wind. Here, we took the example of mechanical energy harvesters that consist of flat artificial "leaves" fixed on the petioles of N. oleander, converting wind energy into electricity. We developed a combined experimental and computational approach to describe the static and dynamic mechanics of the natural and artificial leaves individually and join them together in the typical energy harvesting configuration. The model, in which the leaves are torsional springs with flexible petioles and rigid lamina deforming under the effect of gravity and wind, enables us to design the artificial device in terms of weight, flexibility, and dimensions based on the mechanical properties of the plant leaf. Moreover, it predicts the dynamic motions of the leaf-artificial leaf combination, causing the mechanical-to-electrical energy conversion at a given wind speed. The computational results were validated in dynamic experiments measuring the electrical output of the plant-hybrid energy harvester. Our approach enables us to design the artificial structure for damage-safe operation on leaves (avoiding overloading caused by the interaction between leaves and/or by the wind) and suggests how to improve the combined leaf oscillations affecting the energy harvesting performance. We furthermore discuss how the mathematical model could be extended in future works. In summary, this is a first approach to improve the adaptation of artificial devices to plants, advance their performance, and to counteract damage by mathematical modelling in the device design phase.

A new 3D, microfluidic-oriented, multi-functional, and highly stretchable soft wearable sensor.

Increasing demand for wearable devices has resulted in the development of soft sensors; however, an excellent soft sensor for measuring stretch, twist, and pressure simultaneously has not been proposed yet. This paper presents a novel, fully 3D, microfluidic-oriented, gel-based, and highly stretchable resistive soft sensor. The proposed sensor is multi-functional and could be used to measure stretch, twist, and pressure, which is the potential of using a fully 3D structure in the sensor. Unlike previous methods, in which almost all of them used EGaIn as the conductive material, in this case, we used a low-cost, safe (biocompatible), and ubiquitous conductive gel instead. To show the functionality of the proposed sensor, FEM simulations and a set of designed experiments were done, which show linear (99%), accurate (> 94.9%), and durable (tested for a whole of four hours) response of the proposed sensor. Then, the sensor was put through its paces on a female test subject's knee, elbow, and wrist to show the potential application of the sensor as a body motion sensor. Also, a fully 3D active foot insole was developed, fabricated, and evaluated to evaluate the pressure functionality of the sensor. The result shows good discrimination and pressure measurement for different foot sole areas. The proposed sensor has the potential to be used in real-world applications like rehabilitation, wearable devices, soft robotics, smart clothing, gait analysis, AR/VR, etc.

Historical evolution and new trends for soil-intruder interaction modeling.

Soil is a crucial resource for life on Earth. Every activity, whether natural or man-made, that interacts with the sub or deep soil can affect the land at large scales (e.g. geological risks). Understanding such interactions can help identify more sustainable and less invasive soil penetration, exploration, and monitoring solutions. Over the years, multiple approaches have been used in modeling soil mechanics to reveal soil behavior. This paper reviews the different modeling techniques used to simulate the interaction between a penetrating tool and the soil, following their use over time. Opening with analytical methods, we discuss the limitations that have partially been overcome by the finite element method (FEM). FEM models are capable of simulating more complex conditions and geometries. However, they require the continuum mechanics assumption. Hence, FEM analysis cannot simulate the discrete processes occurring during soil deformation (i.e. the separation and mixing of soil layers, the appearance of cracks, or the flow of soil particles). The discrete element method (DEM) has thus been adopted as a more promising modeling technique. Alongside models, experimental approaches have also been used to describe soil-intruder interactions, complementing or validating simulation results. Recently, bioinspired approaches have been considered promising to improve sustainability and reduce the invasiveness of classical penetration strategies. This review highlights how DEM-based models can help in studying the interaction mechanisms between bioinspired root-like artificial penetrometers and the soil. Bioinspired designs and the merging of multiple analysis approaches can offer new perspectives. These may be pivotal in the design of highly optimized soil robotic explorers capable of adapting their morphology and penetration strategies based on their surrounding conditions.

3D-printed biomimetic artificial muscles using soft actuators that contract and elongate.

Biomimetic machines able to integrate with natural and social environments will find ubiquitous applications, from biodiversity conservation to elderly daily care. Although artificial actuators have reached the contraction performances of muscles, the versatility and grace of the movements realized by the complex arrangements of muscles remain largely unmatched. Here, we present a class of pneumatic artificial muscles, named GeometRy-based Actuators that Contract and Elongate (GRACE). The GRACEs consist of a single-material pleated membrane and do not need any strain-limiting elements. They can contract and extend by design, as described by a mathematical model, and can be realized at different dimensional scales and with different materials and mechanical performances, enabling a wide range of lifelike movements. The GRACEs can be fabricated through low-cost additive manufacturing and even built directly within functional devices, such as a pneumatic artificial hand that is fully three-dimensionally printed in one step. This makes the prototyping and fabrication of pneumatic artificial muscle-based devices faster and more straightforward.