Synchrotron based planar imaging and digital tomosynthesis of breast and biopsy phantoms using a CMOS active pixel sensor.

The SYRMEP (SYnchrotron Radiation for MEdical Physics) beamline at Elettra is performing the first mammography study on human patients using free-space propagation phase contrast imaging. The stricter spatial resolution requirements of this method currently force the use of conventional films or specialized computed radiography (CR) systems. This also prevents the implementation of three-dimensional (3D) approaches. This paper explores the use of an X-ray detector based on complementary metal-oxide-semiconductor (CMOS) active pixel sensor (APS) technology as a possible alternative, for acquisitions both in planar and tomosynthesis geometry. Results indicate higher quality of the images acquired with the synchrotron set-up in both geometries. This improvement can be partly ascribed to the use of parallel, collimated and monochromatic synchrotron radiation (resulting in scatter rejection, no penumbra-induced blurring and optimized X-ray energy), and partly to phase contrast effects. Even though the pixel size of the used detector is still too large - and thus suboptimal - for free-space propagation phase contrast imaging, a degree of phase-induced edge enhancement can clearly be observed in the images.

Lens-Coupled CCD Detector for X-ray Crystallography.

An x-ray crystallography detector (Blue-1) has been built based upon a Fairchild 486 back-illuminated CCD and a custom lens system designed by Optics One Inc. The advantages of our Blue-1 lens system over more conventional fiber-optic tapers are: lower noise and higher efficiency; improved point spread function; negligible spatial distortion; and lack of "chicken-wire" patterns. Also, the engineering is simpler because the CCD is not bonded to the fiber-optic taper. A unique mechanical design has been employed to accurately focus the image on the CCD. The detector software is based on MATLAB and takes advantage of its powerful imaging and signal processing libraries. The CCD timing can be updated on the fly by using a "CCD controller language" to specify timing.