Diffusion of surfactant from a micellar solution to a bare interface. 1. Absorbing boundary.

We analyze dynamic adsorption of surfactant from a micellar solution to a rapidly created surface that acts as an absorbing boundary for surfactant monomers (single molecules), along which the monomer concentration vanishes, with no direct micelle adsorption. This somewhat idealized situation is analyzed as a prototype for situations in which strong suppression of monomer concentration accelerates micelle dissociation, and will be used as a starting point for analysis of more realistic boundary conditions in subsequent work. We present scaling arguments and approximate models for particular time and parameter regimes and compare the resulting predictions to numerical simulations of the reaction-diffusion equations for a polydisperse system containing surfactant monomers and clusters of arbitrary aggregation number. The model considered here exhibits an initial period of rapid shrinkage and ultimate dissociation of micelles within a narrow region near the interface. This opens a micelle-free region near the interface after some time τe, the width of which increases as t1/2 at times t≫τe. In systems that exhibit disparate fast and slow bulk relaxation times τ1 and τ2 in response to small perturbations, τe is usually comparable to or greater than τ1 but much less than τ2. Such systems exhibit a wide intermediate time regime τe

Nonlinear dynamics in micellar surfactant solutions. II. Diffusion.

We discuss diffusion in micellar surfactant solutions in a form appropriate for analyzing experiments that involve large deviations from equilibrium. A general nonlinear dynamical model for inhomogeneous systems is developed that describes the effects of diffusion and micelle kinetics as a set of coupled partial differential equations for unimer concentration, micelle number concentration, average micelle aggregation number, and, optionally, the variance of the micelle aggregation number. More specialized models are developed to describe slow dynamics in situations in which the system stays in a state of partial local equilibrium or full local equilibrium. As an illustrative example of a nonlinear transport phenomenon, we discuss a simple model of diffusion from an initially homogeneous micellar solution to a rapidly created absorbing interface with fast unimer adsorption.

Nonlinear dynamics in micellar surfactant solutions. I. Kinetics.

This is the first of a pair of articles that present the theory of kinetic and transport phenomena in micelle-forming surfactant solutions in a form that facilitates discussion of large deviations from equilibrium. Our goal is to construct approximate but robust reduced models for both homogeneous and inhomogeneous systems as differential equations for unimer concentration c_{1}, micelle number concentration c_{m}, average micelle aggregation number q and (optionally) aggregation number variance σ_{m}^{2}. This first article discusses kinetics in homogeneous solutions. We focus particularly on developing models that can describe both weakly perturbed states and states in which c_{1} is suppressed significantly below the critical micelle concentration, which leads to rapid shrinkage and dissociation of any remaining micelles. This focus is motivated by the strong local suppression of c_{1} that is predicted to occur near interfaces during some adsorption processes that are considered in the second article. Toward this end, we develop a general nonlinear theory of fast stepwise processes for systems that may be subjected to large changes in q and c_{1}. This is combined with the existing nonlinear theory of slow association and dissociation processes to construct a general model for systems governed by stepwise reaction kinetics. We also consider situations in which the slow process of micelle creation and destruction instead occurs primarily by micelle fission and fusion, and analyze the dependencies of micelle lifetime and the slow relaxation time upon surfactant concentration in systems controlled by either association-dissociation or fission-fusion mechanisms.

Transformation of Lipid Vesicles into Micelles by Adding Nonionic Surfactants: Elucidating the Structural Pathway and the Intermediate Structures.

The phospholipid lecithin (L) and the nonionic surfactant Tween 80 (T) are used together in various contexts, including in drug delivery and oil spill remediation. There is hence a need to elucidate the nanostructures in LT mixtures, which is the focus of this paper. We study these mixtures using cryogenic transmission electron microscopy (cryo-TEM), coupled with dynamic light scattering and small-angle neutron scattering. As the concentration of Tween 80 is increased, the vesicles formed by lecithin are transformed into spherical micelles. We identify bicelles (i.e., disc-like micelles) as well as cylindrical micelles as the key stable nanostructures formed at intermediate L/T ratios. The bicelles have diameters ∼13-26 nm, and the bicelle size decreases as the Tween 80 content increases. We propose that the lecithin lipids form the body of the discs, while the Tween 80 surfactants occupy the rims. This hypothesis is consistent with geometric arguments because lecithin is double-tailed and favors minimal curvature, whereas the single-tailed Tween 80 molecules prefer curved interfaces. In the case of cylindrical micelles, cryo-TEM reveals that the micelles are short (length < 22 nm) and flexible. We are able to directly visualize the microstructure of the aggregates formed by lecithin-Tween 80 mixtures, thereby enhancing the understanding of morphological changes in the lecithin-Tween 80 system.

Using Microemulsion Phase Behavior as a Predictive Model for Lecithin-Tween 80 Marine Oil Dispersant Effectiveness.

Marine oil dispersants typically contain blends of surfactants dissolved in solvents. When introduced to the crude oil-seawater interface, dispersants facilitate the breakup of crude oil into droplets that can disperse in the water column. Recently, questions about the environmental persistence and toxicity of commercial dispersants have led to the development of "greener" dispersants consisting solely of food-grade surfactants such as l-α-phosphatidylcholine (lecithin, L) and polyoxyethylenated sorbitan monooleate (Tween 80, T). Individually, neither L nor T is effective at dispersing crude oil, but mixtures of the two (LT blends) work synergistically to ensure effective dispersion. The reasons for this synergy remain unexplained. More broadly, an unresolved challenge is to be able to predict whether a given surfactant (or a blend) can serve as an effective dispersant. Herein, we investigate whether the LT dispersant effectiveness can be correlated with thermodynamic phase behavior in model systems. Specifically, we study ternary "DOW" systems comprising LT dispersant (D) + a model oil (hexadecane, O) + synthetic seawater (W), with the D formulation being systematically varied (across 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0 L:T weight ratios). We find that the most effective LT dispersants (60:40 and 80:20 L:T) induce broad Winsor III microemulsion regions in the DOW phase diagrams (Winsor III implies that the microemulsion coexists with aqueous and oil phases). This correlation is generally consistent with expectations from hydrophilic-lipophilic deviation (HLD) calculations, but specific exceptions are seen. This study then outlines a protocol that allows the phase behavior to be observed on short time scales (ca. hours) and provides a set of guidelines to interpret the results. The complementary use of HLD calculations and the outlined fast protocol are expected to be used as a predictive model for effective dispersant blends, providing a tool to guide the efficient formulation of future marine oil dispersants.

Dense nanolipid fluid dispersions comprising ibuprofen: Single step extrusion process and drug properties.

Dense nanolipid fluid (DNLF) dispersions are highly concentrated aqueous dispersions of lipid nanocarriers (LNCs) with more than 1015 lipid particles per cubic centimeter. Descriptions of dense nanolipid fluid dispersions in the scientific literature are rare, and they have not been used to encapsulate drugs. In this paper we describe the synthesis of DNLF dispersions comprising ibuprofen using a recently described twin-screw extrusion process. We report that such dispersions are stable, bind ibuprofen tightly and yet provide high transdermal drug permeation. Ibuprofen DNLF dispersions prepared according to the present study provide up to five times greater flux of the pharmacologically active S-ibuprofen isomer through human skin than a commercially available racemic ibuprofen emulsion product. We demonstrate scaling up the twin-screw extrusion method to pilot production for a stable, highly permeating ibuprofen DNLF composition based on excipients approved by the US FDA for use in topical products as a key step towards development of a commercially viable, FDA approvable topical ibuprofen medicine to treat osteoarthritis, which has never before been accomplished.

Simulation of diblock copolymer surfactants. III. Equilibrium interfacial adsorption.

Monte Carlo simulations are used to study adsorption of highly asymmetric diblock copolymers to a polymer-polymer interface, and the results compared to self-consistent field theory (SCFT) predictions. The simulation model used here is a bead-spring model that has been used previously to study equilibrium and kinetic properties of spherical micelles [J. A. Mysona et al., Phys. Rev. E 100, 012602 (2019)2470-004510.1103/PhysRevE.100.012602; Phys. Rev. E 100, 012603 (2019)10.1103/PhysRevE.100.012603; Phys. Rev. Lett. 123, 038003 (2019)10.1103/PhysRevLett.123.038003]. Interfacial copolymer concentration Γ and interfacial tension γ are measured as functions of bulk copolymer concentration at concentrations up to the critical micelle concentration over a range of values of the Flory-Huggins χ parameter. The dependence of interfacial pressure Π = γ_{0}-γ on Γ (where γ_{0} is the interfacial tension in the absence of copolymer) is found to be almost independent of χ and to be accurately predicted by SCFT. The bare interfacial tension γ_{0} and total interfacial tension γ(Γ) can also be accurately predicted by SCFT using an estimate of χ obtained from independent analysis of properties of symmetric diblock copolymer melts. SCFT predictions obtained with this estimate of χ do not, however, adequately describe the thermodynamics of the coexisting bulk copolymer solution, as a result of contraction of the strongly interacting core block of dissolved copolymers. Accurate predictions of the relationship between bulk and interfacial properties can thus only be obtained for this system by combining SCFT predictions of the interfacial equation of state with a fit to the measured equation of state for the bulk solution.

Does the Solvent in a Dispersant Impact the Efficiency of Crude-Oil Dispersion?

Dispersants, used in the mitigation of oil spills, are mixtures of amphiphilic molecules (surfactants) dissolved in a solvent. The recent large-scale use of dispersants has raised environmental concerns regarding the safety of these materials. In response to these concerns, our lab has developed a class of eco-friendly dispersants based on blends of the food-grade surfactants, soy lecithin (L) and Tween 80 (T), in a solvent. We have shown that these "L/T dispersants" are very efficient at dispersing crude oil into seawater. The solvent for dispersants is usually selected based on factors like toxicity, volatility, or viscosity of the overall mixture. However, with regard to the dispersion efficiency of crude oil, the solvent is considered to play a negligible role. In this paper, we re-examine the role of solvent in the L/T system and show that it can actually have a significant impact on the dispersion efficiency. That is, the dispersion efficiency can be altered from poor to excellent simply by varying the solvent while keeping the same blend of surfactants. We devise a systematic procedure for selecting the optimal solvents by utilizing Hansen solubility parameters. The optimal solvents are shown to have a high affinity for crude oil and limited hydrophilicity. Our analysis further enables us to identify solvents that combine high dispersion efficiency, good solubility of the L/T surfactants, a low toxicity profile, and a high flash point.

Simulation of diblock copolymer surfactants. II. Micelle kinetics.

Molecular dynamics (MD) simulations are used to measure dynamical properties of a simple bead-spring model of A-B diblock copolymer molecules, and to characterize rates and mechanisms of several dynamical processes. Dynamical properties are analyzed within the context of a kinetic population model that allows for both stepwise insertion and expulsion of individual free molecules and occasional fission and fusion of micelles. Kinetic coefficients for stepwise processes and micelle fission have been extracted from MD simulations of individual micelles. Insertion of a free surfactant molecule into a preexisting micelle is shown to be a completely diffusion-controlled process for the model studied here. Estimates are given for rates of rare events that create and destroy entire micelles by competing mechanisms involving stepwise association and dissociation or fission and fusion. Both mechanisms are shown to be relevant over the range of parameters studied here, with association and dissociation dominating in systems with more soluble surfactants and fission and fusion dominating in systems with less soluble surfactants.

Simulation of diblock copolymer surfactants. I. Micelle free energies.

Semigrand hybrid Monte Carlo simulations are used to measure equilibrium properties of micelles formed in a simple bead-spring model of asymmetric A-B diblock copolymer surfactant molecules in an A homopolymer solvent, over a range of values of surfactant solubility. Simulations are used to accurately measure the free energy of formation of micellar clusters as a function of aggregation number over a wide range of values, and to characterize the crossover from spherical to rodlike micelle shape with increasing aggregation number. Dynamical properties of the same model are considered in an accompanying paper [Phys. Rev. E 100, 012603 (2019)10.1103/PhysRevE.100.012603].

Mechanism of Micelle Birth and Death.

In micellar surfactant solutions, changes in the total number of micelles are rare events that can occur by either of two mechanisms-by stepwise association and dissociation via insertion and expulsion of individual molecules or by fission and fusion of entire micelles. Molecular dynamics simulations are used here to estimate rates of these competing mechanisms in a simple model of block copolymer micelles in homopolymer solvent. This model exhibits a crossover with increasing degree of repulsion between solvent and micelle core components, from a regime dominated by association and dissociation to a regime dominated by fission and fusion.

Ammonia Synthesis at Low Pressure.

Ammonia can be synthesized at low pressure by the use of an ammonia selective absorbent. The process can be driven with wind energy, available locally in areas requiring ammonia for synthetic fertilizer. Such wind energy is often called "stranded," because it is only available far from population centers where it can be directly used. In the proposed low pressure process, nitrogen is made from air using pressure swing absorption, and hydrogen is produced by electrolysis of water. While these gases can react at approximately 400 °C in the presence of a promoted conventional catalyst, the conversion is often limited by the reverse reaction, which makes this reaction only feasible at high pressures. This limitation can be removed by absorption on an ammine-like calcium or magnesium chloride. Such alkaline metal halides can effectively remove ammonia, thus suppressing the equilibrium constraints of the reaction. In the proposed absorption-enhanced ammonia synthesis process, the rate of reaction may then be controlled not by the chemical kinetics nor the absorption rates, but by the rate of the recycle of unreacted gases. The results compare favorably with ammonia made from a conventional small scale Haber-Bosch process.

Modulus- and Surface-Energy-Tunable Thiol-ene for UV Micromolding of Coatings.

Micromolding of UV-curable materials is a patterning method to fabricate microstructured surfaces that is an additive manufacturing process fully compatible with roll-to-roll systems. The development of micromolding for mass production remains a challenge because of the multifaceted demands of UV curable materials and the risk of demolding-related defects, particularly when patterning high-aspect-ratio features. In this research, a robust micromolding approach is demonstrated that integrates thiol-ene polymerization and UV LED curing. The moduli of cured thiol-ene coatings were tuned over 2 orders of magnitude by simply adjusting the acrylate concentration of a coating formulation, the curing completed in all cases within 10 s of LED exposure. Densely packed 50-µm-wide gratings were faithfully replicated in coatings ranging from soft materials to stiff highly cross-linked networks. Further, surface energy was modified with a fluorinated polymer, achieving a surface energy reduction of more than a half at a loading of 1 wt %, and enabling tall (100 µm) defect-free patterns to be attained. The demolding strengths of microstructured coatings were compared using quantitative peel testing, showing its decrease with decreasing surface energy, coating modulus, and grating height. This micromolding process, combining tunability in thermomechanical and surface properties, makes thiol-ene microstructured coatings attractive candidates for roll-to-roll manufacture. As a demonstration of the utility of the process, superhydrophobic surfaces are prepared using the system modified by the fluorinated polymer.

Design and Characterization of a PVLA-PEG-PVLA Thermosensitive and Biodegradable Hydrogel.

A set of poly(δ-valerolactone-co-d,l-lactide)-b-poly(ethylene glycol)-b-poly(δ-valerolactone-co-d,l-lactide) (PVLA-PEG-PVLA) triblock copolymers was synthesized and the solution properties were characterized using rheology, cryo-TEM, cryo-SEM, SANS, and degradation studies. This polymer self-assembles into a low viscosity fluid with flowerlike spherical micelles in water at room temperature and transforms into a wormlike morphology upon heating, accompanied by gelation. At even higher temperatures syneresis is observed. At physiological temperature (37 °C) the hydrogel's average pore size is around 600 nm. The PVLA-PEG-PVLA gel degrades in about 45 days in cell media, making this unique hydrogel a promising candidate for biomedical applications.

Dispersion of oil into water using lecithin-Tween 80 blends: The role of spontaneous emulsification.

Lecithin-rich mixtures of the nontoxic surfactants lecithin and Tween 80 are effective marine oil spill dispersants, but produce much higher oil-water interfacial tension than other, comparably effective dispersants. This suggests interfacial phenomena other than interfacial tension influence lecithin-Tween 80 dispersants' effectiveness. The interface between seawater and dispersant-crude oil mixtures was studied using light microscopy, cryogenic scanning electron microscopy, and droplet coalescence tests. Lecithin:Tween 80 ratio was varied from 100:0 to 0:100 and wt% dispersant in the oil was varied from 1.25 to 10wt%. Tween 80-rich dispersants cause oil-into-water spontaneous emulsification, while lecithin-rich dispersants primarily cause water-into-oil spontaneous emulsification. Possible mechanisms for this spontaneous emulsification are discussed, in light of images of spontaneously emulsifying interfaces showing no bursting microstructures, interfacial gel, or phase inversion, and negligible interfacial turbulence. Dispersant loss into seawater due to oil-into-water spontaneous emulsification may explain why Tween 80-rich dispersants are less effective than lecithin-rich dispersants with comparable interfacial tension, although longer droplet coalescence times observed for Tween 80-rich, self-emulsifying dispersant-oil mixtures may mitigate the effects of dispersant leaching. Conversely, surfactant retention in oil via lecithin-rich dispersants' water-into-oil emulsification may explain why lecithin-Tween 80 dispersants are as effective as dispersants containing other surfactant blends which produce lower interfacial tension.

Water-in-Oil Microstructures Formed by Marine Oil Dispersants in a Model Crude Oil.

DOSS (dioctyl sodium sulfosuccinate), Tween 80, and Span 80, surfactants commonly used in marine crude oil spill dispersants, have been mixed into a model oil at a total surfactant concentration of 2 wt %, typical for dispersant-treated oil slicks. These surfactant-oil blends also contained 0.5-1.5 wt % synthetic seawater to enable formation of water-in-oil (W/O) microstructures. Trends in dynamic oil-seawater interfacial tension (IFT) as a function of surfactant blend composition are similar to those observed in prior work for crude oil treated with similar blends of these surfactants. In particular, Span 80-rich surfactant blends exhibit much slower initial dynamic IFT decline than DOSS-rich surfactant blends in both model oil and crude oil, and surfactant blends containing 50 wt % Tween 80 and a DOSS:Span 80 ratio near 1:1 produce ultralow IFT in the model oil (<10(-4) mN/m) just as similar surfactant blends do in crude oil. At all DOSS:Span 80 ratios, surfactant blends containing 50 wt % Tween 80 form clear solutions with seawater in the model oil. Cryo-transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS) show that these solutions contain spherical W/O microstructures, the size and dispersity of which vary with surfactant blend composition and surfactant:seawater molar ratio. Span 80-rich microstructures exhibit high polydispersity index (PDI > 0.2) and large diameters (≥100 nm), whereas DOSS-rich microstructures exhibit smaller diameters (20-40 nm) and low polydispersity index (PDI < 0.1), indicating a narrow microstructure size distribution. The smaller diameters of DOSS-rich microstructures, as well as the fact that DOSS molecules, being oil-soluble, can diffuse to a bulk oil-water interface as monomers much faster than any of these microstructures, may explain why DOSS-rich blends adsorb to the oil-water interface more quickly than Span 80-rich blends, a phenomenon which has been linked in prior work to the higher effectiveness of DOSS-rich Tween/Span/DOSS-based oil dispersants.

Efficient dispersion of crude oil by blends of food-grade surfactants: Toward greener oil-spill treatments.

Effectiveness of oil spill dispersants containing lecithin/Tween 80 (L/T) blends in ethanol was measured as a function of L:T ratio, surfactant:solvent ratio, solvent composition, and dispersant:oil ratio (DOR) using baffled flask dispersion effectiveness tests. Optimal L:T ratios are between 60:40 and 80:20 (w/w); at higher L:T ratios, effectiveness is limited by high interfacial tension, while at lower L:T ratios, insufficient lecithin is present to form a well-packed monolayer at an oil-water interface. These optimal L:T ratios retain high effectiveness at low DOR: 80:20 (w/w) L:T dispersant is 89% effective at 1:25 DOR (v/v) and 77% effective at 1:100 DOR (v/v). Increasing surfactant:solvent ratio increases dispersant effectiveness even when DOR is proportionally reduced to keep total surfactant concentration dosed into the oil constant. Replacing some of the ethanol with octane or octanol also increases dispersant effectiveness, suggesting that ethanol's hydrophilicity lowers dispersant-oil miscibility, and that more hydrophobic solvents would increase effectiveness.

Nanoparticles Containing High Loads of Paclitaxel-Silicate Prodrugs: Formulation, Drug Release, and Anticancer Efficacy.

We have investigated particle size, interior structure, drug release kinetics, and anticancer efficacy of PEG-b-PLGA-based nanoparticles loaded with a series of paclitaxel (PTX)-silicate prodrugs [PTX-Si(OR)3]. Silicate derivatization enabled us to adjust the hydrophobicity and hydrolytic lability of the prodrugs by the choice of the alkyl group (R) in the silicate derivatives. The greater hydrophobicity of these prodrugs allows for the preparation of nanoparticles that are stable in aqueous dispersion even when loaded with up to ca. 75 wt % of the prodrug. The hydrolytic lability of silicates allows for facile conversion of prodrugs back to the parent drug, PTX. A suite of eight PTX-silicate prodrugs was investigated; nanoparticles were made by flash nanoprecipitation (FNP) using a confined impingement jet mixer with a dilution step (CIJ-D). The resulting nanoparticles were 80-150 nm in size with a loading level of 47-74 wt % (wt %) of a PTX-silicate, which corresponds to 36-59 effective wt % of free PTX. Cryogenic transmission electron microscopy images show that particles are typically spherical with a core-shell structure. Prodrug/drug release profiles were measured. Release tended to be slower for prodrugs having greater hydrophobicity and slower hydrolysis rate. Nanoparticles loaded with PTX-silicate prodrugs that hydrolyze most rapidly showed in vitro cytotoxicity similar to that of the parent PTX. Nanoparticles loaded with more labile silicates also tended to show greater in vivo efficacy.

Almost fooled again: new insights into cesium dodecyl sulfate micelle structures.

Replacing sodium with cesium as the counterion for dodecyl sulfate in aqueous solution results in stronger complexation and charge shielding, which should lead to larger micelles and ultimately to a cylindrical structure (cf. spheres for sodium dodecyl sulfate), but small angle X-ray scattering (SAXS) and small angle neutron scattering patterns previously have been interpreted with ellipsoidal micelle models. We directly image CsDS micelles via cryo-transmission electron microscopy and report large core-shell spherical micelles at low concentrations (≤2 wt %) and cylindrical micelles at higher concentrations (5.0 and 8.1 wt %). These structures are shown to be consistent with SAXS patterns modeled using established form factors. These findings highlight the importance of combining real and reciprocal space imaging techniques in the characterization of self-assembled soft materials.

Cryogenic electron microscopy study of nanoemulsion formation from microemulsions.

We examine a process of preparing oil-in-water nanoemulsions by quenching (diluting and cooling) precursor microemulsions made with nonionic surfactants and a cosurfactant. The precursor microemulsion structure is varied by changing the concentration of the cosurfactant. Water-continuous microemulsions produce initial nanoemulsion structures that are small and simple, mostly unilamellar vesicles, but microemulsions that are not water-continuous produce initial nanoemulsion structures that are larger and multilamellar. Examination of these structures by cryo-electron microscopy supports the hypothesis that they are initially vesicular structures formed via lamellar intermediate structures, and that if the lamellar structures are too well ordered they fail to produce small simple structures.