In situ temperature measurements in sooting methane/air flames using synchrotron x-ray fluorescence of seeded krypton atoms.

Synchrotron x-ray fluorescence has been used to measure temperatures in optically dense gases where traditional methods would fail. These data provide a benchmark for stringent tests of computational fluid dynamics models for complex systems where physical and chemical processes are intimately linked. The experiments measured krypton number densities in a sooting, atmospheric pressure, nonpremixed coflow flame that is widely used in combustion research. The experiments not only form targets for the models, but the simulations also identify potential sources of uncertainties in the measurements, allowing for future improvements.

Toward net-zero sustainable aviation fuel with wet waste-derived volatile fatty acids.

With the increasing demand for net-zero sustainable aviation fuels (SAF), new conversion technologies are needed to process waste feedstocks and meet carbon reduction and cost targets. Wet waste is a low-cost, prevalent feedstock with the energy potential to displace over 20% of US jet fuel consumption; however, its complexity and high moisture typically relegates its use to methane production from anaerobic digestion. To overcome this, methanogenesis can be arrested during fermentation to instead produce C2 to C8 volatile fatty acids (VFA) for catalytic upgrading to SAF. Here, we evaluate the catalytic conversion of food waste-derived VFAs to produce n-paraffin SAF for near-term use as a 10 vol% blend for ASTM "Fast Track" qualification and produce a highly branched, isoparaffin VFA-SAF to increase the renewable blend limit. VFA ketonization models assessed the carbon chain length distributions suitable for each VFA-SAF conversion pathway, and food waste-derived VFA ketonization was demonstrated for >100 h of time on stream at approximately theoretical yield. Fuel property blending models and experimental testing determined normal paraffin VFA-SAF meets 10 vol% fuel specifications for "Fast Track." Synergistic blending with isoparaffin VFA-SAF increased the blend limit to 70 vol% by addressing flashpoint and viscosity constraints, with sooting 34% lower than fossil jet. Techno-economic analysis evaluated the major catalytic process cost-drivers, determining the minimum fuel selling price as a function of VFA production costs. Life cycle analysis determined that if food waste is diverted from landfills to avoid methane emissions, VFA-SAF could enable up to 165% reduction in greenhouse gas emissions relative to fossil jet.

Reactive Molecular Dynamics Simulations and Quantum Chemistry Calculations To Investigate Soot-Relevant Reaction Pathways for Hexylamine Isomers.

Sooting tendencies of a series of nitrogen-containing hydrocarbons (NHCs) have been recently characterized experimentally using the yield sooting index (YSI) methodology. This work aims to identify soot-relevant reaction pathways for three selected C6H15N amines, namely, dipropylamine (DPA), diisopropylamine (DIPA), and 3,3-dimethylbutylamine (DMBA) using ReaxFF molecular dynamics (MD) simulations and quantum mechanical (QM) calculations and to interpret the experimentally observed trends. ReaxFF MD simulations are performed to determine the important intermediate species and radicals involved in the fuel decomposition and soot formation processes. QM calculations are employed to extensively search for chemical reactions involving these species and radicals based on the ReaxFF MD results and also to quantitatively characterize the potential energy surfaces. Specifically, ReaxFF simulations are carried out in the NVT ensemble at 1400, 1600, and 1800 K, where soot has been identified to form in the YSI experiment. These simulations account for the interactions among test fuel molecules and pre-existing radicals and intermediate species generated from rich methane combustion, using a recently proposed simulation framework. ReaxFF simulations predict that the reactivity of the amines decrease in the order DIPA > DPA > DMBA, independent of temperature. Both QM calculations and ReaxFF simulations predict that C2H4, C3H6, and C4H8 are the main nonaromatic soot precursors formed during the decomposition of DPA, DIPA, and DMBA, respectively, and the associated reaction pathways are identified for each amine. Both theoretical methods predict that sooting tendency increases in the order DPA, DIPA, and DMBA, consistent with the experimentally measured trend in YSI. This work demonstrates that sooting tendencies and soot-relevant reaction pathways of fuels with unknown chemical kinetics can be identified efficiently through combined ReaxFF and QM simulations. Overall, predictions from ReaxFF simulations and QM calculations are consistent, in terms of fuel reactivity, major intermediates, and major nonaromatic soot precursors.

Performance-advantaged ether diesel bioblendstock production by a priori design.

Lignocellulosic biomass offers a renewable carbon source which can be anaerobically digested to produce short-chain carboxylic acids. Here, we assess fuel properties of oxygenates accessible from catalytic upgrading of these acids a priori for their potential to serve as diesel bioblendstocks. Ethers derived from C2 and C4 carboxylic acids are identified as advantaged fuel candidates with significantly improved ignition quality (>56% cetane number increase) and reduced sooting (>86% yield sooting index reduction) when compared to commercial petrodiesel. The prescreening process informed conversion pathway selection toward a C11 branched ether, 4-butoxyheptane, which showed promise for fuel performance and health- and safety-related attributes. A continuous, solvent-free production process was then developed using metal oxide acidic catalysts to provide improved thermal stability, water tolerance, and yields. Liter-scale production of 4-butoxyheptane enabled fuel property testing to confirm predicted fuel properties, while incorporation into petrodiesel at 20 vol % demonstrated 10% improvement in ignition quality and 20% reduction in intrinsic sooting tendency. Storage stability of the pure bioblendstock and 20 vol % blend was confirmed with a common fuel antioxidant, as was compatibility with elastomeric components within existing engine and fueling infrastructure. Technoeconomic analysis of the conversion process identified major cost drivers to guide further research and development. Life-cycle analysis determined the potential to reduce greenhouse gas emissions by 50 to 271% relative to petrodiesel, depending on treatment of coproducts.

Mechanism for strong binding of CdSe quantum dots to multiwall carbon nanotubes for solar energy harvesting.

As hybrid nanomaterials have myriad of applications in modern technology, different functionalization strategies are being intensely sought for preparing nanocomposites with tunable properties and structures. Multi-Walled Carbon Nanotube (MWNT)/CdSe Quantum Dot (QD) heterostructures serve as an important example for an active component of solar cells. The attachment mechanism of CdSe QDs and MWNTs is known to affect the charge transfer between them and consequently to alter the efficiency of solar cell devices. In this study, we present a novel method that enables the exchange of some of the organic capping agents on the QDs with carboxyl functionalized MWNTs upon ultrasonication. This produces a ligand-free covalent attachment of the QDs to the MWNTs. EXAFS characterization reveals direct bond formation between the CdSe QDs and the MWNTs. The amount of oleic acid exchanged is quantified by temperature-programmed decomposition; the results indicate that roughly half of the oleic acid is removed from the QDs upon functionalized MWNT addition. Additionally, we characterize the optical and structural properties of the QD-MWNT heterostructures and investigate how these properties are affected by the attachment. The steady state photoluminescence response of QDs is completely quenched. The lifetime of the PL of the QDs measured with time resolved photoluminescence shows a significant decrease after they are covalently bonded to functionalized MWNTs, suggesting a fast charge transfer between QDs and MWNTs. Our theoretical calculations are consistent with and support these experimental findings and provide microscopic models for the QD binding mechanisms.

Sooting tendencies of oxygenated hydrocarbons in laboratory-scale flames.

Sooting tendencies have been measured for 186 oxygenated and 89 regular hydrocarbons under controlled laboratory conditions. The test compounds include alcohols, ethers, aldehydes, ketones, esters, alkanes, alkenes, and cycloalkanes ranging in size from methanol to isododecane. Sooting tendency was characterized with a new method based on measuring particle concentrations in methane/air nonpremixed flames when 1000 ppm of each test compound was added to the fuel. This method offers high precision and high sensitivity to the direct chemical effects of the additive. The results provide a wide-ranging yet detailed quantitative picture of how fuel oxygen affects soot formation, which will be useful for optimizing the soot-reducing benefits of oxygenated renewable fuels. The measured sooting tendencies of 1-alcohols are similar to those of n-alkanes with the same number of carbon atoms, while those of secondary alcohols are slightly higher. Aldehydes and ketones soot the same as n-alkanes with one less carbon atom. The sooting tendencies of esters depend strongly on molecular structure and increase in this order: methyl and ethyl esters < carboxylic acids, propyl esters, and n-alkanes < butyl and pentyl esters. The high sooting tendencies of the secondary alcohols and higher esters suggest that four-center and six-center reaction pathways are important.

Decomposition and hydrocarbon growth processes for esters in non-premixed flames.

Biomass fuels are a promising renewable energy source, and so, the mechanisms that may produce toxic oxygenated byproducts and aromatic hydrocarbons from oxygenated hydrocarbons are of interest. Esters have the form R-(C=O)-O-R' and are components of biodiesel fuels. The five specific esters studied here are isomers of C5H10O2. The experiments were performed in atmospheric pressure coflowing methane/air non-premixed flames. A series of flames were generated by separately doping the fuel mixture with 5,000 ppm of each ester. This concentration is sufficiently large to produce measurable changes in intermediate hydrocarbon concentrations, yet small enough to not disturb the overall flame structure. Since the overall structure is not perturbed, the measured changes in the intermediate hydrocarbons can be directly attributed to the reactions of the esters. Analysis of these changes reveals that unimolecular six-centered dissociation is the primary decomposition pathway for the three esters with molecular arrangements capable of undergoing that mechanism. The remaining two esters exhibited decomposition rates and products that are consistent with simple fission as the dominant decomposition mechanism, though we do not exclude other pathways from playing a significant role in their decomposition. All of the esters produce aromatic hydrocarbons at higher rates than the undoped fuel, and the molecular arrangement of the ester isomers plays a role in the degree of aromatic formation. Isomer variations also influence the type and quantity of toxic oxygenates that are produced in the flames.