Unprocessed Atmospheric Nitrate in Waters of the Northern Forest Region in the U.S. and Canada.

Little is known about the regional extent and variability of nitrate from atmospheric deposition that is transported to streams without biological processing in forests. We measured water chemistry and isotopic tracers (δ18O and δ15N) of nitrate sources across the Northern Forest Region of the U.S. and Canada and reanalyzed data from other studies to determine when, where, and how unprocessed atmospheric nitrate was transported in catchments. These inputs were more widespread and numerous than commonly recognized, but with high spatial and temporal variability. Only 6 of 32 streams had high fractions (>20%) of unprocessed atmospheric nitrate during baseflow. Seventeen had high fractions during stormflow or snowmelt, which corresponded to large fractions in near-surface soil waters or groundwaters, but not deep groundwater. The remaining 10 streams occasionally had some (<20%) unprocessed atmospheric nitrate during stormflow or baseflow. Large, sporadic events may continue to be cryptic due to atmospheric deposition variation among storms and a near complete lack of monitoring for these events. A general lack of observance may bias perceptions of occurrence; sustained monitoring of chronic nitrogen pollution effects on forests with nitrate source apportionments may offer insights needed to advance the science as well as assess regulatory and management schemes.

Calcium and aluminum cycling in a temperate broadleaved deciduous forest of the eastern USA: relative impacts of tree species, canopy state, and flux type.

Ca/Al molar ratios are commonly used to assess the extent of aluminum stress in forests. This is among the first studies to quantify Ca/Al molar ratios for stemflow. Ca/Al molar ratios in bulk precipitation, throughfall, stemflow, litter leachate, near-trunk soil solution, and soil water were quantified for a deciduous forest in northeastern MD, USA. Data were collected over a 3-year period. The Ca/Al molar ratios in this study were above the threshold for aluminum stress (<1). Fagus grandifolia Ehrh. (American beech) had a median annual stemflow Ca/Al molar ratio of 15.7, with the leafed and leafless values of 12.4 and 19.2, respectively. The corresponding Ca/Al molar ratios for Liriodendron tulipifera L. (yellow poplar) were 11.9 at the annual time scale and 11.9 and 13.6 for leafed and leafless periods, respectively. Bayesian statistical analysis showed no significant effect of canopy state (leafed, leafless) on Ca/Al molar ratios. DOC was consistently an important predictor of calcium, aluminum, and Ca/Al ratios. pH was occasionally an important predictor of calcium and aluminum concentrations, but was not a good predictor of Ca/Al ratio in any of the best-fit models (of >500 examined). This study supplies new data on Ca/Al molar ratios for stemflow from two common deciduous tree species. Future work should examine Ca/Al molar ratios in stemflow of other species and examine both inorganic and organic aluminum species to better gauge the potential for, and understand the dynamics of, aluminum toxicity in the proximal area around tree boles.

Dual effects of ß-cyclodextrin-stabilised silver nanoparticles: enhanced biofilm inhibition and reduced cytotoxicity.

The composition and mode of synthesis of nanoparticles (NPs) can affect interaction with bacterial and human cells differently. The present work describes the ability of ß-cyclodextrin (ß-CD) capped silver nanoparticles (AgNPs) to inhibit biofilm growth and reduce cytotoxicity. Biofilm formation of Staphylococcus epidermidis CSF 41498 was quantified by a crystal violet assay in the presence of native and capped AgNPs (Ag-10CD and Ag-20CD), and the morphology of the biofilm was observed by scanning electron microscope. The cytotoxicity of the AgNPs against HaCat cells was determined by measuring the increase in intracellular reactive oxygen species and change in mitochondrial membrane potential (ΔΨm). Results indicated that capping AgNPs with ß-CD improved their efficacy against S. epidermidis CSF 41498, reduced biofilm formation and their cytotoxicity. The study concluded that ß-CD is an effective capping and stabilising agent that reduces toxicity of AgNPs against the mammalian cell while enhancing their antibiofilm activity.

An investigation of the biochemical properties of tetrazines as potential coating additives.

1,2,4,5-Tetrazine and its 3,6-disubstituted derivatives are currently used for a range of industrial and medical applications as they exhibit particular coordination chemistries, characterised by electron and charge transfer phenomena. The aim of the present work is to synthesise two tetrazine derivatives, namely 3,6-dihydrazino-1,2,4,5-tetrazine (DHDTZ) and 1,2,4,5-tetrazine dicarboxylic acid (DCTZ), and determine their antibacterial, antioxidant and anticorrosion characteristics as additives in a sol-gel coating on SS316L steel. The structure of the tetrazines was confirmed by NMR and FTIR while the surface morphology of bacterial cells in their presence was observed by AFM. Their ability to inhibit corrosion on 316L stainless steel was electrochemically determined using a potentiodynamic scanning (PDS) technique. The corrosion inhibition results showed that the acidic DCTZ provided the best corrosion protection. The concentration-dependent antioxidant capacity of the tetrazines was confirmed by both DPPH radical scavenging activity and FRAP assays, showing higher activity for DHDTZ than DCTZ. Furthermore, a DHDTZ doped sol-gel solution was prepared and curing parameter (temperature and time) was optimised for coating on microtitre wells and stainless steel panel. The antibacterial activity of the coated surfaces against Pseudomonas aeruginosa ATCC 27853 and the biofilm forming bacteria Staphylococcus epidermidis CSF 41498 was determined. DHDTZ showed significantly higher antibacterial activities with MIC as low as 31 ppm compared to 250 ppm for DCTZ.

Non-cytotoxic antibacterial silver-coumarin complex doped sol-gel coatings.

Microbial colonisation on clinical and industrial surfaces is currently of global concern and silane based sol-gel coatings are being proposed as potential solutions. Sol-gels are chemically inert, stable and homogeneous and can be designed to act as a reservoir for releasing antimicrobial agents over extended time periods. In the present study, silver nitrate (AgN) and a series of silver coumarin complexes based on coumarin-3-carboxylatosilver (AgC) and it is 6, 7 and 8 hydroxylated analogues (Ag6, Ag7, Ag8) were incorporated into sol-gel coatings. The comparative antibacterial activity of the coatings was determined against meticillin resistant Staphylococcus aureus (MRSA) and multidrug resistance Enterobacter cloacae WT6. The percentage growth inhibitions were found in the range of 9.2 (±2.7)-66.0 (±1.2)% at low silver loadings of 0.3% (w/w) with E. cloacae being the more susceptible. Results showed that among the Ag coumarin complexes, the Ag8 doped coating had the highest antibiofilm property. XPS confirmed the presence of silver in the nanoparticulate state (Ag(0)) at the coating surface where it remained after 4 days of exposure to bacterial culture. Comparative cytotoxicity studies revealed that the Ag-complex coatings were less toxic than the AgN coating. Thus, it can be concluded that a sol-gel matrix with Ag-coumarin complexes may provide non-toxic surfaces with antibacterial properties.

Preparation and rapid analysis of antibacterial silver, copper and zinc doped sol-gel surfaces.

The colonisation of clinical and industrial surfaces with microorganisms, including antibiotic-resistant strains, has promoted increased research into the development of effective antibacterial and antifouling coatings. This study describes the preparation of metal nitrate (Ag, Cu, Zn) doped methyltriethoxysilane (MTEOS) coatings and the rapid assessment of their antibacterial activity using polyproylene microtitre plates. Microtitre plate wells were coated with different volumes of liquid sol-gel and cured under various conditions. Curing parameters were analysed by thermogravimetric analysis (TGA) and visual examination. The optimum curing conditions were determined to be 50-70°C using a volume of 200 µl. The coated wells were challenged with Gram-positive and Gram-negative bacterial cultures, including biofilm-forming and antibiotic-resistant strains. The antibacterial activities of the metal doped sol-gel, at equivalent concentrations, were found to have the following order: silver>zinc>copper. The order is due to several factors, including the increased presence of silver nanoparticles at the sol-gel coating surface, as determined by X-ray photoelectron spectroscopy, leading to higher elution rates as measured by inductively coupled plasma atomic emission spectroscopy (ICP-AES). The use of microtitre plates enabled a variety of sol-gel coatings to be screened for their antibacterial activity against a wide range of bacteria in a relatively short time. The broad-spectrum antibacterial activity of the silver doped sol-gel showed its potential for use as a coating for biomaterials.

Enhancement of the antibacterial properties of silver nanoparticles using beta-cyclodextrin as a capping agent.

Silver nanoparticles (AgNPs) were synthesised by reducing silver salts using NaBH(4) followed by capping with varying concentrations of beta-cyclodextrin (beta-CD) and were physically characterised. Antibacterial activity against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus was determined by a microtitre well method. The AgNPs were spherical under transmission electron microscopy, whilst dynamic light scattering showed average diameters of capped particles to be smaller (4-7 nm) than their uncapped equivalents (17 nm). Capped particles demonstrated superior photostability when exposed to intense ultraviolet radiation for 4h as well as significantly (P<0.05) higher (up to 3.5-fold) antibacterial activity. The influence of beta-CD concentration was seen to delay bacterial growth, indicating that a Trojan horse mechanism may be occurring owing to bacterial carbohydrate affinity, thereby enhancing silver ion absorption.

Dual-action hygienic coatings: benefits of hydrophobicity and silver ion release for protection of environmental and clinical surfaces.

Coatings that demonstrate reduced attachment of crystalline precipitates and the medical device colonising Staphylococcus epidermidis were prepared by the immobilisation of silver doped perfluoropolyether-urethane siloxane thin films on glass substrates. The presence of stratified hydrophobic perfluoropolyether groups protects the coating surface from the attachment of crystalline hydrophilic species such as chlorides and phosphates, whilst silver ion release inhibited attachment of S. epidermidis and subsequent biofilm formation in vitro. The release of silver ions protects the perfluoro groups from the hydrophobic interactions of S. epidermidis cells, which can reduce the hydrophobicity of the protective coating. These coatings also exhibited significant antibacterial activity against planktonic Acinetobacter baumannii and S. epidermidis bacterial strains. Detailed elemental and chemical surface analysis obtained using X-ray photoelectron spectroscopy (XPS) provided useful information on the effect of bacterial incubation on key indicator hydrophobic and hydrophilic functional groups. XPS analysis indicated preferential adsorption of S. epidermidis cells at the hydrophobic sites along the polymeric chain. These dual-action hygienic coatings can be employed to protect against contamination environmental surfaces and bacterial colonisation on implanted medical devices.

Silver doped perfluoropolyether-urethane coatings: antibacterial activity and surface analysis.

The colonisation of clinical and industrial surfaces with pathogenic microorganisms has prompted increased research into the development of effective antibacterial and antifouling coatings. There is evidence that implanted biomedical surfaces coated with metallic silver can be inactivated by physiological fluids, thus reducing the bioactivity of the coating. In this work, we report the biofilm inhibition of Staphylococcus epidermidis using a room temperature processed silver doped perfluoropolyether-urethane coating. The release of silver ions from these fluoropolymers over a six-day period inhibited bacterial encrustation - as observed by scanning electron microscopy (SEM). X-ray photoelectron spectroscopy (XPS) analysis indicated differences in carbon, fluorine and sodium surface composition between silver doped and undoped fluoropolymers after exposure to nutrient rich media. These silver doped perfluoropolyether coatings also exhibited antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli, Pseudomonas aeruginosa and Acinetobacter baumannii; suggesting potential use in preventing transmission of pathogenic and opportunistic microbes on environmental surfaces in healthcare facilities. The broad-spectrum antibacterial activity of these silver release coatings may be exploited on biomaterials surfaces to combat the development of resistant Gram-negative Enterobacteriaceae that can occur during prophylactic treatment for urinary tract infections.

Prevention of Staphylococcus epidermidis biofilm formation using a low-temperature processed silver-doped phenyltriethoxysilane sol-gel coating.

Sol-gel coatings which elute bioactive silver ions are presented as a potential solution to the problem of biofilm formation on indwelling surfaces. There is evidence that high-temperature processing of such materials can lead to diffusion of silver away from the coating surface, reducing the amount of available silver. In this study, we report the biofilm inhibition of a Staphylococcus epidermidis biofilm using a low-temperature processed silver-doped phenyltriethoxysilane sol-gel coating. The incorporation of a silver salt into a sol-gel matrix resulted in an initial high release of silver in de-ionised water and physiological buffered saline (PBS), followed by a lower sustained release for at least 6 days-as determined by graphite furnace-atomic absorption spectroscopy (GF-AAS). The release of silver ions from the sol-gel coating reduced the adhesion and prevented formation of a S. epidermidis biofilm over a 10-day period. The presence of surface silver before and after 24 h immersion in PBS was confirmed by X-ray photoelectron spectroscopy (XPS). These silver-doped coatings also exhibited significant antibacterial activity against planktonic S. epidermidis. A simple test to visualise the antibacterial effect of silver release coatings on neighbouring bacterial cultures is also reported.