Risk Assessment of Ozone Fumigation Under Vacuum to Control Potential Infestation of Coffee Berry Borer and Coffee Leaf Rust in Green Coffee Beans Imported Into Hawaii.

Studies were conducted with ozone gas fumigation under vacuum as a methyl bromide alternative against life stages of coffee berry borer (CBB) Hypothenemus hampei (Ferrari) (Coleoptera: Curculionidae: Scolytinae), and the urediniospores of coffee leaf rust (CLR), Hemileia vastatrix Berkeley & Broome (Basidiomycota: Pucciniales) in green coffee, Coffea spp. L. Fumigation with 10,000 ppm O3 gas under -25.4 mm Hg vacuum1 at 13.0 ± 3.0°C for 6.0 h killed all CBB larvae, pupae, and adults, but did not kill all CBB eggs (~15% survival). Mortality of CLR urediniospores was 100% within the first hour of the 6-h fumigation. Ozone fumigation had no adverse effects on coffee quality. Results indicated that CBB adult hitchhikers may be the only target life stage of quarantine concern, and additional studies focused on this stage. CBB adult survival and reproduction decreased significantly at moisture contents ≤20%, and F1 generation survival did not occur in green coffee at moisture contents ≤15%. As the international standard for green coffee moisture content is 9-12%, adult CBB should not survive or reproduce in exported dry green coffee. Standard industry processing of harvested coffee cherries to the green coffee stage using either mechanical- or sun-drying eliminated CBB infestations from the field. A systems approach is recommended for exporting green coffee to control CBB and CLR that includes eliminating CBB life stages with standard processing methods, reducing moisture content to 9-12% to prevent egg deposition, survival or reproduction, and O3 fumigation to ensure quarantine security against potential CBB adult hitchhikers.

Physical and antibacterial properties of edible films formulated with apple skin polyphenols.

Fruit and vegetable skins have polyphenolic compounds, terpenes, and phenols with antimicrobial and antioxidant activity. These flavoring plant essential oil components are generally regarded as safe. Edible films made from fruits or vegetables containing apple skin polyphenols have the potential to be used commercially to protect food against contamination by pathogenic bacteria. The main objective of this study was to evaluate physical properties as well as antimicrobial activities against Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella enterica of apple skin polyphenols at 0% to 10% (w/w) concentrations in apple puree film-forming solutions formulated into edible films. Commercial apple skin polyphenol powder had a water activity of 0.44 and high total soluble phenolic compounds and antioxidant capacity (995.3 mg chlorogenic acid/100 g and 14.4 mg Trolox/g, respectively). Antimicrobial activities of edible film containing apple skin polyphenols were determined by the overlay method. Apple edible film with apple skin polyphenols was highly effective against L. monocytogenes. The minimum concentration need to inactive L. monocytogenes was 1.5%. However, apple skin polyphenols did not show any antimicrobial effect against E. coli O157:H7 and S. enterica even at 10% level. The presence of apple skin polyphenols reduced water vapor permeability of films. Apple skin polyphenols increased elongation of films and darkened the color of films. The results of the present study show that apple skin polyphenols can be used to prepare apple-based antimicrobial edible films with good physical properties for food applications by direct contact.

Gelation, oxygen permeability, and mechanical properties of mammalian and fish gelatin films.

The objective of this study was to evaluate the gelation, thermal, mechanical, and oxygen permeability properties of different mammalian, warm- and cold-water fish gelatin solutions and films. Mammalian gelatin solutions had the highest gel set temperatures, followed by warm-water fish and then cold-water fish gelatin solutions. These differences were related to concentrations of imino acids present in each gelatin, with mammalian gelatin having the highest and cold-water fish gelatin having the lowest concentrations. Mammalian and warm-water fish gelatin films contained helical structures, whereas cold-water fish gelatin films were amorphous. This was due to the films being dried at room temperature (23 °C), which was below or near the gelation temperatures of mammalian and warm-water fish gelatin solutions and well above the gelation temperature of cold-water fish gelatin solutions. Tensile strength, percent elongation, and puncture deformation were highest in mammalian gelatin films, followed by warm-water fish gelatin film and then by cold-water fish gelatin films. Oxygen permeability values of cold-water fish gelatin films were significantly lower than those for mammalian gelatin films. These differences were most likely due to higher moisture sorption in mammalian gelatin films, leading to higher oxygen diffusivity.

Effects of allspice, cinnamon, and clove bud essential oils in edible apple films on physical properties and antimicrobial activities.

Essential oils (EOs) derived from plants are rich sources of volatile terpenoids and phenolic compounds. Such compounds have the potential to inactivate pathogenic bacteria on contact and in the vapor phase. Edible films made from fruits or vegetables containing EOs can be used commercially to protect food against contamination by pathogenic bacteria. EOs from cinnamon, allspice, and clove bud plants are compatible with the sensory characteristics of apple-based edible films. These films could extend product shelf life and reduce risk of pathogen growth on food surfaces. This study evaluated physical properties (water vapor permeability, color, tensile properties) and antimicrobial activities against Escherichia coli O157:H7, Salmonella enterica, and Listeria monocytogenes of allspice, cinnamon, and clove bud oils in apple puree film-forming solutions formulated into edible films at 0.5% to 3% (w/w) concentrations. Antimicrobial activities were determined by 2 independent methods: overlay of the film on top of the bacteria and vapor phase diffusion of the antimicrobial from the film to the bacteria. The antimicrobial activities against the 3 pathogens were in the following order: cinnamon oil > clove bud oil > allspice oil. The antimicrobial films were more effective against L. monocytogenes than against the S. enterica. The oils reduced the viscosity of the apple solutions and increased elongation and darkened the colors of the films. They did not affect water vapor permeability. The results show that apple-based films with allspice, cinnamon, or clove bud oils were active against 3 foodborne pathogens by both direct contact with the bacteria and indirectly by vapors emanating from the films.

Antibacterial effects of allspice, garlic, and oregano essential oils in tomato films determined by overlay and vapor-phase methods.

Physical properties as well as antimicrobial activities against Escherichia coli O157:H7, Salmonella enterica, and Listeria monocytogenes of allspice, garlic, and oregano essential oils (EOs) in tomato puree film-forming solutions (TPFFS) formulated into edible films at 0.5% to 3% (w/w) concentrations were investigated in this study. Antimicrobial activities were determined by 2 independent methods: overlay of the film on top of the bacteria and vapor-phase diffusion of the antimicrobial from the film to the bacteria. The results indicate that the antimicrobial activities against the 3 pathogens were in the following order: oregano oil > allspice oil > garlic oil. Listeria monocytogenes was less resistant to EO vapors, while E. coli O157:H7 was more resistant to EOs as determined by both overlay and vapor-phase diffusion tests. The presence of plant EO antimicrobials reduced the viscosity of TPFFS at the higher shear rates, but did not affect water vapor permeability of films. EOs increased elongation and darkened the color of films. The results of the present study show that the 3 plant-derived EOs can be used to prepare tomato-based antimicrobial edible films with good physical properties for food applications by both direct contact and indirectly by vapors emanating from the films.

Antibacterial activity against E. coli O157:H7, physical properties, and storage stability of novel carvacrol-containing edible tomato films.

Edible films containing plant antimicrobials are gaining importance as potential treatment to extend product shelf life and reduce risk of pathogen growth on contaminated food surfaces. The main objective of the present study was to evaluate the antimicrobial activities, storage stabilities, and physical-chemical-mechanica1 properties of novel edible films made from tomatoes containing carvacrol, the main constituent of oregano oil. The antimicrobial activities against E. coli O157:H7 and the stability of carvacrol were evaluated during the preparation and storage of tomato-based films made by 2 different casting methods, continuous casting and batch casting. Antimicrobial assays of tomato films indicated that optimum antimicrobial effects occurred with carvacrol levels of approximately 0.75% added to tomato purees before film preparation. HPLC analysis of the films indicated that the carvacrol concentrations and bactericidal effect of the films remained unchanged over the storage period of up to 98 d at 5 and 25 degrees C. Carvacrol addition to the tomato puree used to prepare the films increased water vapor permeability of tomato films. The continuous method for casting of the films appears more suitable for large-scale use than the batch method. This 1st report on tomato-based edible antimicrobial tomato films suggests that these films have the potential to prevent adverse effects of contaminated food and promote human health associated with the consumption of tomatoes.

Properties of novel hydroxypropyl methylcellulose films containing chitosan nanoparticles.

In this study, chitosan nanoparticles were prepared and incorporated in hydroxypropyl methylcellulose (HPMC) films under different conditions. Mechanical properties, water vapor and oxygen permeability, water solubility, and scanning and transmission electron microscopy (SEM and TEM) results were analyzed. Incorporation of chitosan nanoparticles in the films improved their mechanical properties significantly, while also improving film barrier properties significantly. The chitosan poly(methacrylic acid) (CS-PMAA) nanoparticles tend to occupy the empty spaces in the pores of the HPMC matrix, inducing the collapse of the pores and thereby improving film tensile and barrier properties. This study is the first to investigate the use of nanoparticles for the purpose of strengthening HPMC films.

Thermal transitions and extrusion of glycerol-plasticized whey protein mixtures.

The effects of glycerol and moisture contents on the thermal transitions of whey protein isolate (WPI) powder-glycerol-water mixtures were studied. Mixtures with ratios of 100:0, 70:30, 60:40, and 50:50 WPI:glycerol on a dry basis (db) were preconditioned to 0.34 +/- 0.01 (25.4 +/- 0.4 degrees C) and 0.48 +/- 0.02 (25.9 +/- 2.2 degrees C) water activity. Differential scanning calorimetry (DSC) showed the existence of an endothermic peak starting at 148.3 +/- 0.7 degrees C for 100% WPI preconditioned to a water activity of 0.34 +/- 0.01. The onset temperature of this peak decreased with addition and increase of glycerol content, as well as with the increase in water activity from 0.34 +/- 0.01 to 0.48 +/- 0.02. An additional endothermic transition, important for extruding the mixtures into flexible sheets, occurred in mixtures containing 50% glycerol db, preconditioned to 0.48 +/- 0.02 water activity. The onset temperature of the peak was 146 +/- 2.0 degrees C. Whey protein-based sheets containing 45.8%, 48.8%, and 51.9% glycerol db were obtained using a Haake-Leistritz corotating twin-screw extruder. All samples were obtained at a screw speed of 250 rpm and a final barrel-temperature profile of 20, 20, 20, 80, 110, and 130 degrees C. Melt temperature at the time of sheet formation was 143 to 150 degrees C. Average thickness of the sheets was 1.31 +/- 0.02 mm. Samples with 45.8% glycerol db had significantly higher tensile strength (TS) than samples with higher glycerol contents. Also, as glycerol concentration increased, sheet elastic modulus (EM) decreased significantly (P

Effect of berry size and sodium hydroxide pretreatment on the drying characteristics of blueberries under infrared radiation heating.

This research studied the effect of berry size and dipping pretreatment in hot sodium hydroxide (NaOH) solution on the drying characteristics of blueberries under infrared radiation (IR) heating. Changes in the microstructure and diffusion coefficient of the berries after the NaOH pretreatment were also determined using scanning electronic microscopy and dynamic vapor sorption (DVS), respectively. To quantify the effect of berry size, non-pretreated bulk blueberries were sorted into 6 groups based on their diameters and dried at 70 degrees C. To determine the effectiveness of NaOH pretreatment in improving drying characteristics, bulk blueberries of different sizes, both nonpretreated and NaOH pretreated, were dried at constant temperatures of 80 and 90 degrees C, and variable temperatures of 70 degrees C for 50 min followed by 90 degrees C for 50 min. The NaOH pretreatment dipped blueberries in 0.1% NaOH solution with fruit to solution ratio 1:1 (w/v) at initial temperature of 93 degrees C for 5 s. Results showed that the drying rate increased with decreased berry size. Average moisture diffusivity was in the range of 5.89 to 8.13 m2/s at 70 degrees C. The NaOH pretreatment increased drying rate and moisture diffusivity and reduced the number of broken berries, especially at high drying temperatures. Results from SEM observation and DVS showed that the increase in diffusivity coefficients of berry coat and loss of intact microstructure in coat and tissue cells might contribute to the effect of NaOH pretreatment on the IR drying of blueberries.

Effects of microcrystalline cellulose on functional properties of hydroxy propyl methyl cellulose microcomposite films.

Edible films and coatings in foods can be used to increase shelf-life and improve organoleptic characteristics of foods by avoiding deterioration of food components and therefore promoting preservation of the final product. This study is the first to investigate the use of different size fillers for the purpose of preparing edible composite films with fillers < 1.0 microm in size. For this purpose, water vapor permeability and mechanical properties of HPMC (hydroxy propyl methyl cellulose) based films with the inclusion of different size MCC (microcrystalline cellulose) fillers were studied. The water vapor permeability of the control HPMC film was 1.2 +/- 0.2 g-mm/kPa-h-m2 and did not show a significant change with the addition of fillers. A comparison of mechanical properties of the films with a tensile test showed that tensile strength of the control film, which was prepared using a 3 wt% HPMC solution, increased from 29.7 +/- 1.6 MPa to 70.1 +/- 7.9 MPa with the addition of 500-nm size particles, while it increased only to 37.4 +/- 5.5 MPa with the addition of 3-microm size particles. Also important is that the elongation percentage of the control film did not decrease significantly with the addition of submicron size fillers to the HPMC films. This study showed that the increased surface area per weight of smaller size MCC fillers compared to their larger size counterparts was highly beneficial in terms of film mechanical property improvement.

Protein-lipid interactions in edible films and coatings.

Proteins and lipids are capable of interacting in a many different ways to form effective edible films and coatings. Combinations of proteins and lipids function in a variety of colloidal systems such as emulsions and microemulsions. Edible films and coatings can be formed from both of these starting systems. In addition, laminant films can be developed by overlaying proteins and lipids. Covalent bonding of lipids to proteins through lipophilization offers unique opportunities for film formation with improved properties. This manuscript reviews recent research on film formation and properties of each of these film types and discusses their relative advantages and disadvantages. Applications of protein-lipid films to food systems are examined. Promising areas for future research are identified.

Fruit-alginate interactions in novel restructured products.

Novel, healthy, value-added restructured fruit products meet consumer demand for an improved diet containing increasing amounts of fruit. As primary ingredients, fruit purees promise to provide new outlets for visually imperfect fruit or fruit that is too small for the fresh or canned markets. Generally these new product forms require a texturizing agent such as alginate to control the functional properties of the final restructured fruit products. Traditional alginate and pectin gel systems are reviewed in this manuscript as are mixed gel systems. Recent research results describing the production and properties of novel restructured products containing high-guluronic alginate and peach puree without any additional calcium or sugar source are reviewed. Effects of fruit/alginate interactions on gel formation conditions and texture profile results are evaluated.