Chemosensory behaviour of juvenile crown-of-thorns sea star (Acanthaster sp.), attraction to algal and coral food and avoidance of adult conspecifics.

Intraspecific and habitat-mediated responses to chemical cues play key roles in structuring populations of marine species. We investigated the behaviour of herbivorous-stage juvenile crown-of-thorns sea stars (COTS; Acanthaster sp.) in flow-through choice chambers to determine if chemical cues from their habitat influence movement and their transition to become coral predators. Juveniles at the diet transition stage were exposed to cues from their nursery habitat (coral rubble-crustose coralline algae (CCA)), live coral and adult COTS to determine if waterborne cues influence movement. In response to CCA and coral as sole cues, juveniles moved towards the cue source and when these cues were presented in combination, they exhibited a preference for coral. Juveniles moved away from adult COTS cues. Exposure to food cues (coral, CCA) in the presence of adult cues resulted in variable responses. Our results suggest a feedback mechanism whereby juvenile behaviour is mediated by adult chemical cues. Cues from the adult population may deter juveniles from the switch to corallivory. As outbreaks wane, juveniles released from competition may serve as a proximate source of outbreaks, supporting the juveniles-in-waiting hypothesis. The accumulation of juveniles within the reef infrastructure is an underappreciated potential source of COTS outbreaks that devastate coral reefs.

Effects of Particle Abrasion Media and Pressure on Flexural Strength and Bond Strength of Zirconia.

OBJECTIVES: To compare the effects of particle abrasion medium and pressure on shear bond strength and biaxial flexural strength of three generations of zirconia (Lava Frame, Lava Plus, and Lava Esthetic) with the goal of optimizing the bond to zirconia. METHODS: 280 discs (14 mm diameter; 1 mm thickness) of each zirconia were milled and sintered. Specimens of each material were randomly distributed into 14 groups (n=20); half were tested for shear bond strength and half were tested for biaxial flexural strength. The specimens were particle abraded on one surface by 2 different media (50 µm alumina particles or 50 µm glass beads) for 10 seconds at three different pressures (15, 30, and 45 psi or 0.1, 0.2, 0.3 MPa). Untreated specimens served as positive control. A tube (1.50 mm diameter) filled with dual cured resin cement (Panavia SA) was placed onto the surface and light cured. Specimens were stored in water (37°C for 24 hours) and shear bond strength was measured in a universal testing machine (Instron). Biaxial flexural strength of each specimen was measured according to ISO 6872. Shear bond strength and biaxial flexural strength were compared individually with a 2-way analysis of variance (ANOVA) for factors surface treatment and zirconia composition. RESULTS: Significant differences were seen between surface treatments (p<0.01), zirconia composition (p<0.01) and their interaction (p<0.01) for both bond strength and flexural strength. With alumina particle abrasion, higher pressure produced higher bonds for Lava Frame and Lava Plus zirconia while the bond of Lava Esthetic declined with increased pressure. Higher pressure (>0.2 MPa or 30 psi) with alumina decreased biaxial flexural strength with Lava Esthetic zirconia. CONCLUSIONS: Particle abrasion with alumina produced a significantly better combination of bond strength while maintaining biaxial strength of three zirconia materials than particle abrasion with glass beads. The bond strength also depended upon the pressure of particle abrasion and the generation of zirconia used.

Three-Component Difunctionalization of Cyclohexenyl Triflates: Direct Access to Versatile Cyclohexenes via Cyclohexynes.

Difunctionalization of strained cyclic alkynes presents a powerful strategy to build richly functionalized cyclic alkenes in an expedient fashion. Herein we disclose an efficient and flexible approach to achieve carbohalogenation, dicarbofunctionalization, aminohalogenation and aminocarbonation of readily available cyclohexenyl triflates. We have demonstrated the novel use of zincate base/nucleophile system for effective formation of key cyclohexyne intermediates and selective addition of various carbon and nitrogen nucleophiles. Importantly, leveraging the resulting organozincates enables the incorporation of a broad range of electrophilic partners to deliver structurally diverse cyclohexene motifs. The importance and utility of this method is also exemplified by the modularity of this approach and the ease in which even highly complex polycyclic scaffolds can be accessed in one step.

Flexural strength of a layered zirconia and porcelain dental all-ceramic system.

STATEMENT OF PROBLEM: New processing techniques have facilitated the use of zirconia core materials in all-ceramic dental prostheses. Zirconia has many potential advantages compared to existing core materials; however, its performance when layered with porcelain has not been evaluated. PURPOSE: This study investigated the strength of a wide variety of layered zirconia and porcelain beams to determine whether the inclusion of zirconia cores results in improved strength. MATERIAL AND METHODS: Eight types of layered or simple zirconia and porcelain beams (n = 10), approximately fixed partial denture-size, were made of a tetragonal polycrystalline zirconium dioxide partially stabilized with yttria core (Lava System Frame) and a feldspathic dental porcelain (Lava Ceram veneer ceramic). Elastic moduli of the materials were measured using an acoustic method. Maximum force and modulus of rupture were determined using 3-point flexural testing and a universal testing machine. Descriptive statistical methods were used. RESULTS: Beams with porcelain tensile surfaces recorded mean tensile strengths or moduli of rupture from 77 to 85 MPa, whereas beams with zirconia tensile surfaces recorded moduli of rupture almost an order of magnitude higher, 636 to 786 MPa. The elastic moduli of the porcelain and zirconia materials were 71 and 224 GPa, respectively. Crack propagation following initial tensile cracking often involved the porcelain-zirconia interface, as well as bulk porcelain and zirconia. CONCLUSION: The layered zirconia-porcelain system tested recorded substantially higher moduli of rupture than have been previously reported for other layered all-ceramic systems.

Retrospective analysis of serum and nasal mucus from cattle in Northern Ireland for evidence of infection with influenza A virus.

Eighty-four pairs of acute and convalescent serum samples collected in 1998 and 1999 from 17 outbreaks of respiratory disease, milk drop syndrome or diarrhoea in cattle were tested by haemagglutination inhibition against human influenza viruses A/Eng/333/80 (HIN1) and A/Eng/427/88 (H3N2). Antibodies to these viruses were present in the convalescent sera of 56.5 per cent and 58.8 per cent cattle tested, respectively, with 56 per cent of the animals seroconverting to one or both viruses. Titres were typically higher to A/Eng/427/88 (H3N2). Further testing of a subset of 21 of these serum pairs against the predominant H1N1 and H3N2 human and porcine strains circulating when the samples were collected revealed that the highest reactivity, in terms of both the magnitude of the recorded titres and the number of positive sera, was to human H3N2 strains. The titres to human H1N1 strains and to both porcine subtypes were low or absent. Attempts to isolate influenza A virus from nasal mucus or swab samples from 142 cattle from 46 cases of respiratory disease and/or milk drop syndrome by passage in embryonated specific pathogen-free eggs were unsuccessful.

Thyroxine treatment in patients with symptoms of hypothyroidism but thyroid function tests within the reference range: randomised double blind placebo controlled crossover trial.

OBJECTIVES: To determine whether thyroxine treatment is effective in patients with symptoms of hypothyroidism but with thyroid function tests within the reference range, and to investigate the effect of thyroxine treatment on psychological and physical wellbeing in healthy participants. DESIGN: Randomised double blind placebo controlled crossover trial. SETTING: Outpatient clinic in a general hospital. PARTICIPANTS: 25 patients with symptoms of hypothyroidism who had thyroid function tests within the reference range, and 19 controls. METHODS: PARTICIPANTS were given thyroxine 100 microgram or placebo to take once a day for 12 weeks. Washout period was six weeks. They were then given the other to take once a day for 12 weeks. All participants were assessed physiologically and psychologically at baseline and on completion of each phase. MAIN OUTCOME MEASURES: Thyroid function tests, measures of cognitive function and of psychological and physical wellbeing. RESULTS: 22 patients and 19 healthy controls completed the study. At baseline, patients' scores on 9 out of 15 psychological measures were impaired when compared with controls. Patients showed a significantly greater response to placebo than controls in 3 out of 15 psychological measures. Healthy participants had significantly lower scores for vitality when taking thyroxine compared to placebo (mean (SD) 60 (17) v 73 (16), P<0.01). However, patients' scores from psychological tests when taking thyroxine were no different from those when taking placebo except for a poorer performance on one visual reproduction test when taking thyroxine. Serum concentrations of free thyroxine increased and those of thyroid stimulating hormone decreased in patients and controls while they were taking thyroxine, confirming compliance with treatment. Although serum concentrations of free triiodothyronine increased in patients and controls taking thyroxine, the difference between the response to placebo and to thyroxine was significant only in the controls. CONCLUSIONS: Thyroxine was no more effective than placebo in improving cognitive function and psychological wellbeing in patients with symptoms of hypothyroidism but thyroid function tests within the reference range. Thyroxine did not improve cognitive function and psychological wellbeing in healthy participants.

Photography in dentistry.

The use of photography is becoming a standard for today's modern dental practice. Dental imaging is critical for the sharing of visual information among the patient, dentist, and ceramist. This article covers the basics of camera, lens, and flash selection, and the use of camera flash systems. It will also provide guidelines for obtaining a good dental image.

Survival of In-Ceram crowns in a private practice: a prospective clinical trial.

STATEMENT OF PROBLEM: Prior reports on some all-ceramic crown systems have indicated high failure rates through fracture. PURPOSE: This study prospectively evaluated the survival of infiltrated alumina crowns (In-Ceram) in a private practice. MATERIAL AND METHODS: All the In-Ceram crowns placed in a prosthodontic practice since its introduction in 1990 were serially included. Patients were recalled at 6 monthly intervals. Those who did not attend in the previous 6 months were contacted by telephone and a series of answers to standardized questions recorded. The few patients who were lost to follow-up or who died were removed from the study from the time of last contact. RESULTS: A total of 408 crowns in 107 patients were followed for periods from 1 to 86 months. As the 3-year data combined a meaningful period of service with a large sample size, these data were focused on. The 3-year survival rate was 96% for a sample size of 223. Three-year data indicated that core fracture and porcelain fracture occurred at rates of approximately 0.6% and 0.3% per year, respectively. Otherwise sound restorations were removed at a rate of approximately 0.3% per year for esthetic, endodontic, or prosthetic reasons. Anterior crowns tended to have a slightly higher 3-year survival rate (98%) than premolars or molars (94%). CONCLUSION: Clinical failure rate of In-Ceram crowns was low. Crowns were lost because of core fracture, porcelain fracture, and removal without failure. Failure tended to be more common for molar and premolar crowns than for anterior crowns.

Glass-infiltrated zirconia/alumina-based ceramic for crowns and fixed partial dentures.

The increased demand for metal-free restorative alternatives has resulted in the proliferation of all-ceramic systems. While these materials can predictably achieve aesthetic results in the anterior, they have traditionally been contraindicated for posterior applications due to the greater stresses present in the region. This article discusses a zirconia/alumina-based ceramic system that has been developed to expand the alternatives for the aesthetic restoration of the dentition. Material properties and considerations for its use in crown restorations, fixed partial dentures, and custom implant abutments are similarly addressed.

Considerations in the use of polymer and fiber-based indirect restorative materials.

Restorative materials and techniques are constantly refined in order to address the aesthetic expectations of patients. Second-generation laboratory-fabricated composite materials have recently been developed to combine the advantages of porcelain with composite resin. This class of biomaterial can be utilized in a variety of direct and indirect clinical applications than include inlay/onlay restorations, full-coverage crowns, fixed partial dentures, and implant-supported prostheses. This article reviews considerations for the use of these materials from clinical indications through cementation.

Re-organising emergency medical admitting: the Stobhill experience, 1992-1997.

OBJECTIVE: To examine patterns of acute medical emergency admissions and the effect of reorganisation on their management. DESIGN: Examination of statistics for emergency medical admissions from 1992 to 1997, a period that included a major reorganisation of the emergency admitting system within the hospital. SETTING: General hospital in a Scottish conurbation. RESULTS: There was a slow annual increase in numbers of admissions during the period of study with very considerable variations in daily and weekly numbers of admissions. Reorganisation achieved a reduction in average length of stay from seven to 4.5 days permitting reduction of the bed complement from 223 to 161. Following reorganisation, 31% of admissions were discharged home within 48 hours directly from the acute medical receiving ward, 18% of admissions were transferred directly to care of the elderly, and 33% of admissions were transferred to medical wards. Patient and staff satisfaction surveys indicated preference for the new system over the old. Admission peaks over the winter months of the last three years occurred at different weeks in the year. CONCLUSIONS: Reorganisation of the medical admitting system can improve efficiency and allow reductions in staffed beds. The considerable [table: see text] variation in daily demands in the system makes it important to retain flexibility. There may be scope for dealing with the large numbers of short-term admissions in other ways.

The skeleton buildup technique: a systematic approach to the three-dimensional control of shade and shape.

Due to the limitations of current shade-matching systems, shade communication has proven inadequate. Techniques for the fabrication of porcelain crowns that match the natural definition must address numerous factors. While all-ceramic restorations are indicated for the rehabilitation of the anterior dentition, these modalities are problematic in the restoration of teeth with discolored substrates. This article presents a systematic procedure for the three-dimensional fabrication of porcelain restorations. Techniques for building porcelain and altering the translucency of ceramic cores are also presented.

All-ceramic alternatives to conventional metal-ceramic restorations.

In the search for the ultimate esthetic restorative material, many new all-ceramic systems have been introduced to the market. One such system, In-Ceram, is primarily crystalline in nature, whereas all other forms of ceramics used in dentistry consist primarily of a glass matrix with a crystalline phase as a filler. In-Cream can be used to make all-ceramic crowns and fixed partial denture frameworks. Three forms of In-Ceram, based on alumina, spinal (a mixture of alumina and magnesia), or zirconia, make it possible to fabricate frameworks of various translucencies by using different processing techniques. This article discusses clinical indications and contraindications for the use of In-Ceram Alumina and In-Ceram Spinell all-ceramic restorations. Particular attention is given to cement considerations using several clinical examples.

Serum prolactin concentration in patients taking neuroleptic drugs.

OBJECTIVE: Non-tumour causes of hyperprolactinaemia, including prolactin-elevating drugs, must be excluded. There is a general view that such drugs are unlikely to raise serum PRL above 3000 mU/I, but the literature is confusing. We report 8 patients receiving treatment with neuroleptic drugs, whose serum PRL concentrations were grossly elevated. METHODS: Prolactin was measured using a 2-site immunofluorometric assay (Abbott Laboratories; reference range < 500 mU/l). Seven of the eight women (age range 24-49 years) were symptomatic (galactorrhoea, oligo- or amenorrhoea). RESULTS: Prolactin concentrations ranged from 3600 mU/l to 7300 mU/l. All patients had a normal pituitary CT scan. Five patients were treated with bromocriptine without detriment to their mental state. CONCLUSION: Prolactin can rise to concentrations associated with prolactinomas in patients on neuroleptic drugs. As it is rarely possible to stop the drugs to see if the PRL concentration will decline to normal, neuroradiology is required in these patients to exclude a vision-threatening macroprolactinoma before deciding on medical treatment.

Utilization of advanced metal-ceramic technology: clinical and laboratory procedures for a lower-fusing porcelain.

Metal-ceramic restorations remain the most widely accepted type of indirect restorative modality, and have been applied successfully for years. Recent advances in material science have resulted in the development of a new class of metal-ceramic materials that have been termed lower-fusing ceramics. Following proper procedures for preparation and metal framework design, these metal-ceramic porcelains achieve the aesthetics normally demonstrated by conventional all-ceramic restorations. This article provides an overview of the clinical and laboratory processes utilizing these materials and is illustrated by two case presentations.

Using copy milling technology in restorative dentistry.

A technique for the fabrication of copy milled ceramic restorations has been presented. Both direct and indirect fabrication techniques of inlays, onlays, veneers, and crowns are possible. A copy milling machine can mill accurately fitting restorations with a marginal gap of 50 microns. The machine uses premanufactured porcelain blanks, which have improved physical properties over conventional porcelains used in standard techniques. Recently, the ability to mill In-Ceram crowns from presintered alumina blocks and Spinell crowns from alumina/magnesia blocks has been added to the system. The copings are veneered with aluminous porcelain as in the conventional In-Ceram technique.