Laser-induced fluorescence logging as a high-resolution characterisation tool to assess LNAPL mobility.

High-resolution characterisation tools such as Laser-Induced Fluorescence (LIF) logging represent a step forward towards a more effective management of sites contaminated by light non-aqueous phase liquid (LNAPL) petroleum hydrocarbons. In this paper, the applicability of LIF response as an indicator of LNAPL mobility at one site with an unconsolidated aquifer was investigated. LIF profiles were logged adjacent to twin coring locations and wells with LNAPL transmissivity (Tn) measurements in a heterogeneous gasoline contaminated site in Western Australia. LIF response was correlated to Tn to a greater extent than LNAPL saturation (Sn) measurements from coring. In particular, LIF signal maxima were a better indicator of Tn than the integral LIF signal. Furthermore, LIF allowed rapid identification of areas with long-term near-immobile LNAPL (entrapped and residual) because of the multi-wavelength waveforms associated with distinct subsurface characteristics. It was also demonstrated that the delineation of presumably less-mobile intervals could be enhanced by using the relative LIF response in the 350 nm wavelength channel. Thus, this work gave evidence that LIF logging provides valuable information about LNAPL distribution and mobility in commonly found subsurface settings, despite generally poor correlations with Sn measurements. LIF probes can be successfully used to guide the installation and application of more costly conventional methods in addition to the development of existing site models.

LNAPL transmissivity as a remediation metric in complex sites under water table fluctuations.

Water table fluctuations affect the recoverability of light non-aqueous phase liquid (LNAPL) petroleum hydrocarbons. LNAPL transmissivity (Tn) is being applied as an improved metric for LNAPL recoverability. In this paper, the applicability of Tn as a lagging and leading metric in unconsolidated aquifers under variable water table conditions was investigated. Tn values obtained through baildown testing and recovery data-based methods (skimming) were compared in three areas of a heterogeneous gasoline contaminated site in Western Australia. High-resolution characterisation methods were applied to account for differences in the stratigraphic profile and LNAPL distribution. The results showed a range of Tn from 0 m2/day to 2.13 m2/day, exhibiting a strong spatial and temporal variability. Additionally, observations indicated that Tn reductions may be more affected by the potentiometric surface elevation (Zaw) than by the application of mass recovery technologies. These observations reflected limitations of Tn as a lagging metric and a Remedial Endpoint. On the other hand, the consistency and accuracy of Tn as a leading metric was affected by the subsurface conditions. For instance, the area with a larger vertical LNAPL distribution and higher LNAPL saturations found Tn to be less sensitive to changes in Zaw than the other two areas during the skimming trials. Tn values from baildown and skimming tests were generally in a close agreement (less than a factor of 2 difference), although higher discrepancies (by a factor up to 7.3) were found, probably linked to a preferential migration pathway and Zaw. Under stable Zaw, Tn was found to be a relatively reliable metric. However, variable water table conditions affected Tn and caution should be exercised in such scenarios. Consequently, remediation practitioners, researchers and regulators should account for the nexus between Tn, LNAPL distribution, geological setting and temporal effects for a more efficient and sustainable management of complex contaminated sites.

Non-equilibrium zinc uptake onto compost particles from synthetic stormwater.

Zinc uptake onto different particle size compost was evaluated in batch and column studies using a synthetic stormwater to quantify sorption capacity and kinetics. The results showed that the pseudo equilibrium time for uptake increased from 2h to greater than 120h as the particle size of compost increased from 75µm to 6.75mm. This was due to intra-particle diffusion becoming a rate limiting process as the particle size increased. Column effluent data with 1.18mm particles could be fitted by Freundlich isotherm while that from the 4.75mm particles and a mixed particle size columns showed rate limited sorption with tailing and could not be adequately fitted using an equilibrium based isotherm. The results have established rate-limited sorption in amended filtration media due to larger particles under these flow conditions. This needs to be accounted for in the design of these filtration media and during performance modelling.

Simple models for the release kinetics of dissolved organic carbon from woody filtration media.

The mechanisms and kinetics of dissolved organic carbon (DOC) release from woody materials (pine, hardwood and compost) under non-equilibrium leaching conditions was examined through batch and column tests. Mechanistically based kinetic models (first and second order) had a low predictive power for DOC release compared to those based solely on regression (Elovitch, power law). The DOC release data showed a bi-phasic response, with an early period of rapid release (<24h) controlled by film diffusion followed by a slower rate controlled by intra-particle diffusion. After flow interruption, DOC release was primarily controlled by intra-particle diffusion; however, the specific rate parameters generally varied with each flow cycle and between different wood types.

Effect of media type and particle size on dissolved organic carbon release from woody filtration media.

Sequential batch leaching tests were used to evaluate the mass of DOC released from composted garden organics (yard waste), pine and hardwood under pseudo-equilibrium conditions. All media showed an initial rapid decline in DOC values followed by a slower rate during later time periods. Greater than 50% of the DOC leached occurred within the initial time period (<24 h). The mass of DOC leached varied significantly between the materials and to a lesser degree between different particle size ranges. The pine had the lowest leached DOC fraction (2.8-4.8 mg/g), while the hardwood (21-27 mg/g) and compost (13.6-32.7 mg/g) were significantly greater. The type and processing of the woody material incorporated into these systems can have a significant impact on the treated stormwater.