Things to keep in mind when selecting physical assessments in youth soccer: Correlations between test performances, interlimb asymmetries, and effects of maturation.

A range of field-based tests have been proposed for inclusion in physical performance assessment batteries. However, there are obvious time and human resources constraints in applied settings. The knowledge of potential relationships between tests on performance, asymmetries, as well as maturation-induced changes, may help select the most informative and least time-consuming testing battery. The purposes of this study were: (1) to determine correlations in performance between different field-based tests, in interlimb asymmetry between those unilateral tests, and between asymmetry scores and test performances, and (2) to determine the influence of players' maturity status on test performances and asymmetries. A total of 309 male youth soccer players completed a nine-test battery including y-balance test, drop vertical jump, countermovement jump, single leg countermovement jump, standing long jump, single leg hop for distance, Illinois agility test, 10 m sprint, and 20 m sprint. The results revealed moderate-to-very large relationships between jump, sprint, and agility performances (r = 0.43-0.94), but weak-to-moderate correlations between these tests and balance scores (r ≤ 0.38). No relevant relationship (r ≤ 0.32) for asymmetries detected through different unilateral tests was found, nor between asymmetries and performance scores (r < 0.29). While maturity status clearly influenced players' performance, a limited impact on asymmetries was evident. Despite the mentioned relationships, the low shared variance between tests indicates that they should not be used interchangeably, and coaches should select those with the greatest specificity for the sport. Asymmetries do not influence performance, but their prevalence and unchanging nature with maturation can be seen as an opportunity for the identification of highly asymmetrical players and the application of interventions to improve the weaker limb, irrespective of the athlete's stage of development. To this end, the single leg countermovement jump might be viewed as an appropriate test in male youth soccer.

"You Are Not Wrong About Getting Strong:" An Insight Into the Impact of Age Group and Level of Competition on Strength in Spanish Football Players.

OBJECTIVE: This study aimed to compare the maximum and rapid force production of Spanish football players and explore the differences between age group and level of competition. METHODS: A cross-sectional study was developed to evaluate the peak force (PF), relative PF, and rate of force development over 250 ms (RFD0-250) during the isometric midthigh pull between groups of football players based on age group (senior vs junior) and level of competition (national vs regional). Using a portable isometric rig, 111 football players performed 2 isometric midthigh-pull trials on a force plate. Two-way analysis of variance with Bonferroni post hoc correction was applied, and statistical significance was set at P ≤ .05. The PF, relative PF, and RFD0-250 0, 25, 50, 75, and 100 percentiles were also calculated and descriptively reported, separated by age group and level of competition. RESULTS: The analysis of variance revealed a significant main effect of the level of competition for the PF (P < .001), relative PF (P = .003), and RFD0-250 (P < .001). There was a significant main effect of age group for the PF (P < .001). There was a significant interaction effect of the age group × level of competition for relative PF (P = .014). National players were stronger than regional players on the PF and RFD0-250 (P < .001). Senior players were stronger than junior players for the PF (P < .001). CONCLUSIONS: Maximum and rapid force production are crucial for Spanish football players as they progress in both level of competition and age group. Practitioners should encourage young football players to prioritize strength development to improve their athletic performance.

The effect of rest redistribution on kinetic and kinematic variables during the hang pull.

The aim of this study was to compare the effects of rest redistribution (RR) on kinetics and kinematics during the hang pull (HP). Twenty-one male athletes (age 29.5 ± 4.3 years, height 1.78 ± 0.07 m, body mass 75.17 ± 11.11 kg, relative one repetition maximum [1RM] power clean [PC] 1.17 ± 0.14 kg.kg-1) performed the HP using 140% of 1RM PC with 3 traditional sets of 6 repetitions (TS), 9 sets of 2 repetitions with RR [45s rest after 2 repetitions] (RR45) and 6 sets of 3 repetitions with RR [72s rest after 3 repetitions] (RR72). Peak velocity (PV) was higher during RR72 (1.18 ± 0.11 m.s-1) compared to RR45 (1.14 ± 0.11 m.s-1) for the average of 18 repetitions (p = 0.025, g = 0.36). There was a main effect for set configuration with greater peak force (PF) (p < 0.001, g = 0.14) during RR72 compared to RR45, with greater PV and impulse (p < 0.001, g = 0.19-0.36) during RR72 compared to RR45. There was also greater peak velocity maintenance (PVM) (p = 0.042, g = 0.44) for RR72 compared to RR45. There were no significant or meaningful differences (p > 0.05, g = 0.00-0.59) between configurations for any other variables. Rest redistribution protocols did not result in significantly or meaningfully greater kinetics or kinematics during the HP when compared to a TS protocol; although performing RR72 resulted in higher PF, PV, and impulse, with improved PVM compared to RR45.

Relative strength explains the differences in multi-joint rapid force production between sexes.

The primary aim of this study was to determine whether relative strength explains the differences in the rapid force production (force developed during first 150-, 200-, and 250 ms) of females and males, and to evaluate the relationships between peak force and rapid force production. Sixty-three team sport athletes (females: n = 25, age = 21.5 ± 1.3 years, stature = 166 ± 5 cm, body mass = 60.65 ± 10.04 kg; males: n = 38, age = 21.9 ± 1.1 years, stature = 178 ± 7 cm, body mass = 76.55 ± 12.88 kg) performed a series of isometric mid-thigh pull (IMTP) trials, with all participants' data used for correlational analysis. After testing, females and males were divided into 20 strength-matched pairs, based on their relative peak force (peak force ∙ body mass). There were no meaningful differences between sexes for relative force at 150 ms (g = 0.007 [95% CI -0.627, 0.648]), 200 ms (g = -0.059 [95% CI -0.695, 0.588]) and 250 ms (g = -0.156 [95% CI -0.778, 0.473]). Similarly, when expressed as a percentage of peak force there were no meaningful differences in force at 150 ms (g = -0.015 [95.0%CI -0.650, 0.680]), 200 ms (g = -0.099 [95.0%CI -0.714, 0.559]) or 250 ms (g = -0.272 [95.0%CI -0.856, 0.328]) between strength-matched females and males. Based on the correlations, there were very large to nearly perfect relationships (r = 0.77-0.94, p <0.001) between peak force and rapid force production, with peak force explaining 59%, 77% and 89% of the variance in force at 150-, 200- and 250 ms, respectively. When comparing females and males, relative strength (based on body weight or a percentage of peak force) should be considered, and practitioners should be aware of the role of peak force in rapid force production.

Relationships Between Modifiable Risk Factors of Hamstring Strain Injury.

ABSTRACT: Ripley, NJ, Comfort, P, and McMahon, JJ. Relationships between modifiable risk factors of hamstring strain injury. J Strength Cond Res 38(3): 510-516, 2024-The aims of this study were to determine whether any relationship exists between eccentric hamstring strength and isokinetic strength imbalances and bicep femoris long head (BF LH ) architecture. Eighteen physically active men (age 24.7 ± 4.3 years, height 181.9 ± 7.2 cm, mass 84.9 ± 12.9 kg) had resting BF LH muscle architecture assessed using ultrasound, with images taken at the midmuscle belly. Measures of isokinetic strength of the knee extensors and flexors involved subjects performing 3 maximal effort repetitions of concentric knee extension and eccentric knee flexion at 60°·s -1 . Good-excellent relative reliability (intraclass correlation coefficient ≥0.86) and low variability (coefficient of variation <10%) were observed for all variables. Relative BF LH fascicle length (FL) demonstrated significant moderate-to-nearly-perfect associations with isokinetic measures identified as hamstring strain injury risk factors ( p < 0.05, r = 0.38-0.92), whereas absolute BF LH FL was not significantly or meaningfully associated with isokinetic measures ( p = 0.07-0.961, r = 0.01-0.30). Relative BF LH FL should be considered when assessing resting BF LH muscle architecture because it is potentially a more appropriate measure of injury risk because of its greater association with strength measures. However, absolute BF LH FL may have a greater usefulness during growth, maturation, and individual proportions.

The Kneeling Isometric Plantar Flexor Test: Preliminary Reliability and Feasibility in Professional Youth Football.

Calf injuries are common in professional football; thus, the establishment of reliable and time-efficient methods of measuring the peak force capabilities of the plantar flexors with equipment that is accessible to football practitioners is valuable. In this study, we determined the preliminary reliability and feasibility of a new test, termed the kneeling isometric plantar flexion test (KIPFT), for footballers. Twenty-one male youth footballers (age = 17.8 ± 1.1 years, height = 182 ± 5 cm, weight = 77.6 ± 5.9 kg) from English League One football clubs completed three trials of the KIPFT on a wireless force plate at the end (2022-2023) and start (2023-2024) of the season. The within-session reliability of the peak force (relative to body weight) was good-excellent for both limbs and both occasions. On average, performance of the KIPFT took just over 1 min per limb and ~2 min to set up. The peak force values were larger for the non-dominant limbs only at the start versus the end of the season, but there were no between-limb differences. From these results, it was determined that (1) the KIPFT is feasible, (2) a minimum of 32 footballers would be required to establish its between-session reliability with ≥80% statistical power and (3) large-cohort normative data for the KIPFT may be best collected at the start of the football season.

Force plate methodologies applied to injury profiling and rehabilitation in sport: A scoping review protocol.

Musculoskeletal injuries are a common health problem among sporting populations. Such injuries come with a high financial burden to the involved organisations and can have a detrimental impact on the career attainment of injured individuals. Force plates are now a common tool available to sport and exercise science and medicine professionals to enable them to profile injury risk predisposition and modulate the rehabilitation process within sporting environments. This is because contemporary force plate technology is portable and affordable and often comes with software that enables the automatic and immediate feedback of test variables to key stakeholders. However, to our knowledge, to date, there has been no comprehensive review of the scientific literature pertaining to clinical applications of force plate technology. Therefore, this article presents a protocol and a methodological framework to perform a scoping review to identify and map the available scientific literature in which force plates have been applied to the injury profiling and rehabilitation of athletes. The specific aims of the scoping review are 1) to identify and describe the force plate tests, methodologies, and metrics used to screen for injury risk and guide the return of injured athletes to full-time training and competition, 2) to identify potential trends and/or differences by participants' age, sex, and/or level of performance in tests, methodologies, and metrics selected, and 3) to identify key gaps in the existing evidence base and new questions that should be addressed in future research. The global aim of the scoping review is to improve practitioner decision-making around force plate test and variable selection when applied to the injury prevention and rehabilitation of sporting populations.

The Validity of Hawkin Dynamics Wireless Dual Force Plates for Measuring Countermovement Jump and Drop Jump Variables.

Force plate testing is becoming more commonplace in sport due to the advent of commercially available, portable, and affordable force plate systems (i.e., hardware and software). Following the validation of the Hawkin Dynamics Inc. (HD) proprietary software in recent literature, the aim of this study was to determine the concurrent validity of the HD wireless dual force plate hardware for assessing vertical jumps. During a single testing session, the HD force plates were placed directly atop two adjacent Advanced Mechanical Technology Inc. in-ground force plates (the "gold standard") to simultaneously collect vertical ground reaction forces produced by 20 participants (27 ± 6 years, 85 ± 14 kg, 176.5 ± 9.23 cm) during the countermovement jump (CMJ) and drop jump (DJ) tests (1000 Hz). Agreement between force plate systems was determined via ordinary least products regression using bootstrapped 95% confidence intervals. No bias was present between the two force plate systems for any of the CMJ and DJ variables, except DJ peak braking force (proportional bias) and DJ peak braking power (fixed and proportional bias). The HD system may be considered a valid alternative to the industry gold standard for assessing vertical jumps because fixed or proportional bias was identified for none of the CMJ variables (n = 17) and only 2 out of 18 DJ variables.

The Effect of Rest Redistribution on Kinetic and Kinematic Variables During the Countermovement Shrug.

ABSTRACT: Meechan, D, McMahon, JJ, Suchomel, TJ, and Comfort, P. The effect of rest redistribution on kinetic and kinematic variables during the countermovement shrug. J Strength Cond Res 37(7): 1358-1366, 2023-This study compared the effects of rest redistribution (RR) on kinetic and kinematic variables during the countermovement shrug (CMS). Twenty-one male subjects (age 27.2 ± 3.3. years, height 1.78 ± 0.07 m, body mass 77.2 ± 10.6 kg, relative 1 repetition maximum (1RM) power clean [PC] 1.22 ± 0.16 kg·kg-1) performed the CMS using 140% of 1RM PC with 3 traditional sets of 6 repetitions (TS), 9 sets of 2 repetitions with RR [45 s rest after 2 repetitions] (RR45), and 6 sets of 3 repetitions with RR [72 s rest after 3 repetitions] (RR72). There were no significant or meaningful differences (p > 0.05, g = 0.00-0.15) between set configurations for any variables for the average of the 18 repetitions. There were no significant (p > 0.05) or meaningful (g = 0.00-0.14) differences for configuration and configuration × set for peak (PF) and mean force (MF), peak velocity (PV), impulse, phase duration, peak velocity decline, peak velocity maintenance, and rating of perceived exertion. There was significantly greater (p = 0.034) albeit small (g = 0.15) difference for mean velocity (MV) during TS compared with RR72. There were no significant or meaningful differences (p > 0.05, g = 0.00-0.09) between sets for PF, MF, PV, MV, impulse, and duration across TS, RR45, and RR72. Rest redistribution protocols did not result in greater kinetics or kinematics during the CMS compared with TS, when total rest time was equated. Thus, shorter more frequent rest periods during the CMS may not be required to maintain force-time characteristics.

Effect of additional Nordic hamstring exercise or sprint training on the modifiable risk factors of hamstring strain injuries and performance.

The Nordic hamstring exercise (NHE) has commonly been investigated in isolation, however, within practice multiple modalities are commonly incorporated. However, the NHE has a low level of compliance within sport, with sprinting being potentially being preferred. The present study aimed to observe the effect of a lower-limb program with either additional NHE or sprinting on the modifiable risk factors hamstring strain injury (HSI) and athletic performance. 38 collegiate athletes were randomly assigned into three groups: control standardised lower-limb training program (n = 10 (2 female, 8 male), age = 23.50 ± 2.95 years, height = 1.75 ± 0.09 m, mass 77.66 ± 11.82 kg), additional NHE (n = 15 (7 female, 8 male), age = 21.40 ± 2.64 years, height = 1.74 ± 0.04 m, mass 76.95 ± 14.20 kg) and additional sprinting (n = 13 (4 female, 9 male), age = 22.15 ± 2.54 years, height = 1.74 ± 0.05 m, mass 70.55 ± 7.84 kg). All participants performed a standardised lower-limb training program twice per week for seven weeks, including Olympic lifting derivatives, squatting movements, and the Romanian deadlift, with experimental groups performing with either additional sprinting or NHE. Bicep femoris architecture, eccentric hamstring strength, jump performance, lower-limb maximal strength and sprint ability were measured pre and post. All training groups demonstrated significant (p < 0.001), small-moderate increases in Bicep femoris architecture (g = 0.60-1.22), with significant (p < 0.001), small-large increases in absolute and relative eccentric peak force (g = 0.60-1.84). Significant and small increases were observed in take-off velocity and mean propulsion force (p < 0.02, g = 0.47-0.64), with non-significant and small increases for both the sprint and control training groups for mean propulsion force (p > 0.05, g = 0.42-0.50). Nordic and sprint training groups had significant and small increases in peak absolute and relative net force (p < 0.001, g = 0.44-0.60). The control group had a non-significant trivial increase in absolute peak net force (p > 0.05, g = 0.22), with a significant and small increase in relative peak relative net force (p = 0.034, g = 0.48). Significant and small decreases for the NHE and sprinting training groups was observed for 0-10 m, 0-20 m, and 10-20 m sprint time (p < 0.010, g = 0.47-0.71). Performing multiple modalities, with either additional NHE or sprinting, as part of a complete resistance training program was superiorly effective for measures of modifiable risk factors HSI, with similar increases observed in measures of athletic performance derived from the standardised lower-limb training program.

A Systematic Review of the Different Calculation Methods for Measuring Jump Height During the Countermovement and Drop Jump Tests.

BACKGROUND: The heights obtained during the countermovement jump and drop jump tests have been measured by numerous studies using different calculation methods and pieces of equipment. However, the differences in calculation methods and equipment used have resulted in discrepancies in jump height being reported. OBJECTIVES: The aim of this systematic review was to examine the available literature pertaining to the different calculation methods to estimate the jump height during the countermovement jump and drop jump. METHODS: A systematic review of the literature was undertaken using the SPORTDiscus, MEDLINE, CINAHL, and PubMed electronic databases, with all articles required to meet specified criteria based on a quality scoring system. RESULTS: Twenty-one articles met the inclusion criteria, relating various calculation methods and equipment employed when measuring jump height in either of these two tests. The flight time and jump-and-reach methods provide practitioners with jump height data in the shortest time, but their accuracy is affected by factors such as participant conditions or equipment sensitivity. The motion capture systems and the double integration method measure the jump height from the centre of mass height at the initial flat foot standing to the apex of jumping, where the centre of mass displacement generated by the ankle plantarflexion is known. The impulse-momentum and flight time methods could only measure the jump height from the centre of mass height at the instant of take-off to the apex of jumping, thus, providing statistically significantly lower jump height values compared with the former two methods. However, further research is warranted to investigate the reliability of each calculation method when using different equipment settings. CONCLUSIONS: Our findings indicate that using the impulse-momentum method via a force platform is the most appropriate way for the jump height from the instant of take-off to the apex of jumping to be measured. Alternatively, the double integration method via a force platform is preferred to quantify the jump height from the initial flat foot standing to the apex of jumping.

Force Plate-Derived Countermovement Jump Normative Data and Benchmarks for Professional Rugby League Players.

The countermovement jump (CMJ) is an important test in rugby league (RL), and the force plate is the recommended assessment device, as it permits the calculation of several variables that explain jump strategy, alongside jump height. The purpose of this study was to produce normative CMJ data and objective benchmarks for professional RL forwards and backs. Normative data for jump height, modified reactive strength index, and jump momentum are provided for 121 professional RL players (66 forwards and 55 backs) who completed CMJ testing on a portable force plate during preseason training. Standardized T-scores (scaled from 0 to 100) were calculated from the respective positional group mean and standard deviation to create CMJ performance bands that were combined with a qualitative description (ranging from extremely poor to excellent) and a traffic light system to facilitate data interpretation and objective benchmark setting by RL practitioners. The jump height and modified reactive strength index benchmarks were larger for the lighter backs, whereas the jump momentum benchmarks were larger for the heavier forwards. The presented novel approach to compiling and presenting normative data and objective benchmarks may also be applied to other data (i.e., from other tests or devices) and populations.

Comparing biomechanical time series data across countermovement shrug loads.

The effect of load on time-series data has yet to be investigated during weightlifting derivatives. This study compared the effect of load on the force-time and velocity-time curves during the countermovement shrug (CMS). Twenty-nine males performed the CMS at relative loads of 40%, 60%, 80%, 100%, 120%, and 140% one repetition maximum (1RM) power clean (PC). A force plate measured the vertical ground reaction force (VGRF), which was used to calculate the barbell-lifter system velocity. Time-series data were normalized to 100% of the movement duration and assessed via statistical parametric mapping (SPM). SPM analysis showed greater negative velocity at heavier loads early in the unweighting phase (12-38% of the movement), and greater positive velocity at lower loads during the last 16% of the movement. Relative loads of 40% 1RM PC maximised propulsion velocity, whilst 140% 1RM maximized force. At higher loads, the braking and propulsive phases commence at an earlier percentage of the time-normalized movement, and the total absolute durations increase with load. It may be more appropriate to prescribe the CMS during a maximal strength mesocycle given the ability to use supramaximal loads. Future research should assess training at different loads on the effects of performance.

Countermovement Jump Standards in Rugby League: What is a "Good" Performance?

ABSTRACT: McMahon, JJ, Lake, JP, Dos'Santos, T, Jones, PA, Thomasson, ML, and Comfort, P. Countermovement jump standards in rugby league: what is a "good" performance? J Strength Cond Res 36(6): 1691-1698, 2022-The countermovement jump (CMJ) is considered an important test in rugby league, and the force platform is the recommended tool for assessing CMJ performance in this cohort. Because of inconsistent methods applied across previous studies, there is currently a lack of understanding of what constitutes a "good" CMJ performance, with respect to the typical CMJ metrics that are reported for rugby league players. The purpose of this study was, therefore, to produce a scale of reference values for the jump height (JH), reactive strength index modified (RSImod), and mean (PPmean) and peak (PPpeak) propulsion power (relative to body mass) for top-level senior rugby league players competing in the global "forward" and "back" positional groups. One hundred four players (55 forwards and 49 backs) from the top 2 tiers of English rugby league performed 3 CMJs on a force platform at the beginning of pre-season training. The JH, RSImod, PPmean, and PPpeak were calculated using criterion methods, and a scale of norm-referenced values (percentiles) was produced for each positional group. The backs outperformed the forwards for each CMJ metric reported, thus supporting the production of position-specific norm-referenced values. When each positional group was separated into quartile subgroups, the respective JH, RSImod, PPmean, and PPpeak values were mostly largely and significantly different both within and between positions. The presented scale of reference values can, therefore, be used to determine the performance standards of rugby league forwards and backs with respect to the most commonly reported CMJ-derived variables for this cohort.

Identifying and reporting position-specific countermovement jump outcome and phase characteristics within rugby league.

The countermovement jump (CMJ) has been suggested to be an important test of neuromuscular performance for rugby league (RL) players. Identifying force platform-derived CMJ variables that may be more applicable to RL positions (e.g., forwards and backs) has yet to be fully explored in the scientific literature. The aim of this study was to identify RL position-specific CMJ force-time variables. Specifically, we aimed to compare select force-time variables from the countermovement (i.e., the combination of unweighting and braking) and propulsion phases of the CMJ between the global forwards and backs positional groups. We also aimed to compare typical (i.e., jump height) and alternative (i.e., take-off momentum) outcome CMJ variables between positional groups. Finally, we sought to visually present each individual player's CMJ performance alongside the average data to facilitate the interpretation and reporting of the CMJ performances of RL athletes. Twenty-seven forwards and twenty-seven backs who competed in the senior men's English RL Championship, performed three CMJs on a force platform at the beginning of the pre-season training period. There were no significant differences in any countermovement or propulsion phase variable between positions with just small effect sizes noted (P ≥0.09, d ≤0.46). Jump height (and so take-off velocity) was significantly greater for backs with moderate effects displayed (P = 0.03, d = 0.60). Take-off momentum (take-off velocity × body mass) was largely and significantly greater for forwards (P<0.01, d = 1.01). There was considerable overlap of individual player's body mass and CMJ outcome variables across positions, despite significant differences in the mean values attained by each positional group. The results suggest that it may be beneficial for RL practitioners to identify player-specific, or at least position-specific, variables. As a minimum, it may be worthwhile selecting CMJ force-time variables based on what is considered important to individual player's or small clusters of similar players' projected successes during RL competition.

Changes in Early and Maximal Isometric Force Production in Response to Moderate- and High-Load Strength and Power Training.

ABSTRACT: Comfort, P, Jones, PA, Thomas, C, Dos'Santos, T, McMahon, JJ, and Suchomel, TJ. Changes in early and maximal isometric force production in response to moderate- and high-load strength and power training. J Strength Cond Res 36(3): 593-599, 2022-The aims of this study were to determine the changes in early (50-, 100-, 150-, 200-, 250 ms) and maximal isometric force production, in response to a 4-week period of moderate-load resistance training (60-82.5% 1 repetition maximum [1RM]), followed by a 4-week period of high-load (80-90% 1RM) resistance training. Thirty-four subjects (age 19.5 ± 2.8 years; height 1.72 ± 0.08 m; body mass 69.9 ± 11.4 kg; maximal power clean 0.92 ± 0.03 kg·kg-1) participated in this study. Only trivial-to-moderate (0.2-2.7%, d = 0.00-0.88) and nonsignificant (p > 0.05) changes in early isometric force production were observed in response to the moderate-load training period, whereas very large (9.2-14.6%, d = 2.71-4.16), significant (p ≤ 0.001) increases in early isometric force production were observed in response to high-load training. In contrast, there was a very large, significant increase in peak force (PF) across the moderate-load phase (7.7 ± 11.8%, d = 2.02, p = 0.003), but only a moderate significant increase in PF (3.8 ± 10.6%, d = 1.16, p = 0.001) across the high-load phase. The results of this study indicate that high-load multijoint resistance training, that follows moderate-load training, results in superior increases in early multi-joint force production, compared with the changes observed after moderate-load resistance training.

Comparison of Countermovement Jump-Derived Reactive Strength Index Modified and Underpinning Force-Time Variables Between Super League and Championship Rugby League Players.

ABSTRACT: McMahon, JJ, Jones, PA, and Comfort, P. Comparison of countermovement jump-derived reactive strength index modified and underpinning force-time variables between super league and championship rugby league players. J Strength Cond Res 36(1): 226-231, 2022-The countermovement jump (CMJ) is regularly tested in rugby league (RL), with recent work reporting reactive strength index modified (RSImod) to distinguish between levels of play. Differences in CMJ-derived RSImod and underpinning force-time variables between English Super League (SL) and RL Championship (RLC) players are, however, unknown. As SL and RLC teams compete against each other, this study addressed this knowledge gap. Sixty RL players from the English SL (n = 30) and RLC (n = 30) performed 3 CMJs on a force platform at the start of the preseason training. The RSImod was calculated by dividing jump height (JH) by time to take-off (TTT), and several other variables were also extracted from the force-time record. The SL players achieved a significantly higher (large effect) RSImod by performing the CMJ with a significantly shorter (large effect) TTT but a similar (small effect) JH. The SL players achieved the shorter TTT through a significantly reduced (large effects) relative displacement during both the countermovement (combined unweighting and braking displacement) and propulsion phases but a significantly higher (moderate effects) propulsion peak force and power. The relationships between TTT and relative countermovement (r = 0.719, p < 0.001) and propulsion (r = 0.771, p < 0.001) displacement for combined group data were very large. Practitioners working in RL should, therefore, consider reporting RSImod and TTT, alongside JH, after CMJ force-time testing. We also suggest that RL players who produce lower RSImod scores would benefit from being trained to produce larger CMJ propulsion forces over a shallower range of hip, knee, and ankle extension.

Contribution of Eccentric Strength to Cutting Performance in Female Soccer Players.

ABSTRACT: Jones, PA, Dos'Santos, T, McMahon, JJ, and Graham-Smith, P. Contribution of eccentric strength to cutting performance in female soccer players. J Strength Cond Res 36(2): 525-533, 2022-The aim of this study was to examine the contribution of eccentric strength to performance of a 70-90° cutting task (CUT) (time to complete: 5 m approach, 70-90° cut, 3 m exit). Nineteen female soccer players (mean ± SD age, height, and mass; 21.7 ± 4.3 years, 1.67 ± 0.07 m, and 60.5 ± 6.1 kg) from the top 2 tiers of English women's soccer participated in the study. Each player performed 6 trials of the CUT task whereby three-dimensional motion data from 10 Qualisys proreflex cameras (240 Hz) and ground reaction forces from 2 Advanced Mechanical Technology, Inc. force platforms (1,200 Hz) were collected. Relative eccentric knee extensor (ECC-KE) and flexor peak moments (ECC-KF) were collected from both limbs at 60°·s-1 using a Kin-Com isokinetic dynamometer. Hierarchical multiple regression revealed that minimum center of mass (CM) and approach velocities (CM velocity at touchdown of penultimate foot contact) could explain 82% (79% adjusted) of the variation in CUT completion time (F(1,16) = 36.086, p < 0.0001). ECC-KE was significantly (p < 0.05) moderately associated (R ≥ 0.610) with velocities at key instances during the CUT. High (upper 50th percentile) ECC-KE individuals (n = 9) had significantly (p ≤ 0.01; d ≥ 1.34) greater velocities at key instances during the CUT. The findings suggest that individuals with higher ECC-KE produce faster CUT performance, by approaching with greater velocity and maintaining a higher velocity during penultimate and final contact, as they are better able to tolerate the larger loads associated with a faster approach.

No differences in weightlifting overhead pressing exercises kinetics.

This study aimed to compare the kinetics between the push press (PP), push jerk (PJ), and split jerk (SJ). Sixteen resistance-trained participants (12 men and 4 women; age: 23.8 ± 4.4 years; height: 1.7 ± 0.1 m; body mass: 75.7 ± 13.0 kg; weightlifting experience: 2.2 ± 1.3 years; one repetition maximum [1RM] PP: 76.5 ± 19.5 kg) performed 3 repetitions each of the PP, PJ, and SJ at a relative load of 80% 1RM PP on a force platform. The kinetics (peak and mean force, peak and mean power, and impulse) of the PP, PJ, and SJ were determined during the dip and thrust phases. Dip and thrust displacement and duration were also calculated for the three lifts. In addition, the inter-repetition reliability of each variable across the three exercises was analysed. Moderate to excellent reliability was evident for the PP (Intraclass correlation coefficient [ICC] = 0.91-1.00), PJ (ICC = 0.86-1.00), and SJ (ICC = 0.55-0.99) kinetics. A one-way analysis of variance revealed no significant or meaningful differences (p > 0.05, η2 ≤ 0.010) for any kinetic measure between the PP, PJ, and SJ. In conclusion, there were no differences in kinetics between the PP, PJ, and SJ when performed at the same standardised load of 80% 1RM PP.

Kinematic and Neuromuscular Measures of Intensity During Drop Jumps in Female Volleyball Players.

The aim of this study was to assess drop jump (DJ) performance variables (jump height, contact time, and reactive strength index) concomitant to surface electromyography (sEMG) of lower limb muscles during DJs from different drop heights (intensities). The eccentric and concentric phase sEMG from the gastrocnemius medialis, biceps femoris, and vastus medialis muscles were assessed during all tests, with sEMG activity normalized to maximal voluntary isometric contraction (MVIC). In a cross-sectional, study, 10 amateur female volleyball players (age 22.1 ± 1.8 years; body mass 72.9 ± 15.2 kg; height 1.70 ± 0.08 m) completed DJs from six heights [15-90 cm (DJ15 to DJ90)]. During DJs there was no jump-target box to rebound on to. Results of one-way analysis of variance (ANOVA) showed that the jump height, contact time, and reactive strength index were not significantly (p > 0.05) different between drop heights. Mean biceps femoris eccentric and concentric sEMG ranged from 27 to 50%, although without significant differences between drop heights. Mean gastrocnemius medialis eccentric and concentric sEMG remained relatively constant (∼60-80% MVIC) across DJs heights, although eccentric values reached 90-120% MVIC from DJ75 to DJ90. Mean variations of ∼50-100% MVIC for eccentric and ∼50-70% MVIC for concentric sEMG activations were observed in the vastus medialis across DJs heights. The biceps femoris eccentric/concentric sEMG ratio during DJ45 (i.e., 1.0) was lower (p = 0.03) compared to the ratio observed after DJ90 (i.e., 3.2). The gastrocnemius medialis and vastus medialis eccentric/concentric sEMG ratio were not significantly different between drop heights. In conclusion, jumping performance and most neuromuscular markers were not sensitive to DJ height (intensity) in amateur female volleyball athletes.