Unraveling radiation damage and healing mechanisms in halide perovskites using energy-tuned dual irradiation dosing.

Perovskite photovoltaics have been shown to recover, or heal, after radiation damage. Here, we deconvolve the effects of radiation based on different energy loss mechanisms from incident protons which induce defects or can promote efficiency recovery. We design a dual dose experiment first exposing devices to low-energy protons efficient in creating atomic displacements. Devices are then irradiated with high-energy protons that interact differently. Correlated with modeling, high-energy protons (with increased ionizing energy loss component) effectively anneal the initial radiation damage, and recover the device efficiency, thus directly detailing the different interactions of irradiation. We relate these differences to the energy loss (ionization or non-ionization) using simulation. Dual dose experiments provide insight into understanding the radiation response of perovskite solar cells and highlight that radiation-matter interactions in soft lattice materials are distinct from conventional semiconductors. These results present electronic ionization as a unique handle to remedying defects and trap states in perovskites.

Recent Advances in Metallic Glass Nanostructures: Synthesis Strategies and Electrocatalytic Applications.

Recent advances in metallic glass nanostructures (MGNs) are reported, covering a wide array of synthesis strategies, computational discovery, and design solutions that provide insight into distinct electrocatalytic applications. A brief introduction to the development and unique features of MGNs with an overview of top-down and bottom-up synthesis strategies is presented. Specifically, the morphology and structural analysis of several examples applying MGNs as electrodes are highlighted. Subsequently, a comprehensive discussion of commonly employed kinetic parameters and their connection with the unique material structures of MGNs on individual electrocatalytic reactions is made, including the hydrogen evolution reaction, oxygen reduction reaction, and alcohol (methanol or ethanol) oxidation reaction. Finally, a summary of the challenges and perspective on the future research and development relevant to MGNs as electrocatalysts is provided.

PEOz-PEDOT:PSS Composite Layer: A Route to Suppressed Hysteresis and Enhanced Open-Circuit Voltage in a Planar Perovskite Solar Cell.

The successful commercialization of perovskite solar cells (Pvs-SCs) calls for the need to find low-temperature processable interlayers with outstanding charge-transport features. In this work, we strategically blend poly(2-ethyl-2-oxazoline) (PEOz) with PEDOT:PSS as the modified hole transport layer (HTL) to achieve high-efficiency P-I-N CH3NH3PbI3 Pvs-SCs. The PEOz-PEDOT:PSS HTL exhibits enhanced features over the conventional layer including the following: (1) promoting perovskite with enlarged grain sizes to decrease the perovskite layer's recombination, (2) increasing the work function of the HTL, and (3) decreasing the noncapacitive current in Pvs-SCs. Remarkably, we demonstrate a 17.39% power conversion efficiency with very low hysteresis and high Voc values of 1.075 V for Pvs-SCs with PEOz-PEDOT:PSS.

Spray coating of the PCBM electron transport layer significantly improves the efficiency of p-i-n planar perovskite solar cells.

The p-i-n structure for perovskite solar cells has recently shown significant advantages in minimal hysteresis effects, and scalable manufacturing potential using low-temperature solution processing. However, the power conversion efficiency (PCE) of the perovskite p-i-n structure remains low mainly due to limitations using a flat electron transport layer (ETL). In this work, we demonstrate a new approach using spray coating to fabricate the [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) ETL. By creating a rough surface, we effectively improve the light trapping properties inside the PCBM ETL. We reveal that the spray coated PCBM can form a cross-linked network, which may facilitate better charge transport and enhance extraction efficiency. By improving the contact between the perovskite film and the PCBM ETL, a reduction in the trap states is observed resulting in a PCE increase from 13% to >17%.

Charge Transfer from Carbon Nanotubes to Silicon in Flexible Carbon Nanotube/Silicon Solar Cells.

Mechanical fragility and insufficient light absorption are two major challenges for thin flexible crystalline Si-based solar cells. Flexible hybrid single-walled carbon nanotube (SWNT)/Si solar cells are demonstrated by applying scalable room-temperature processes for the fabrication of solar-cell components (e.g., preparation of SWNT thin films and SWNT/Si p-n junctions). The flexible SWNT/Si solar cells present an intrinsic efficiency ≈7.5% without any additional light-trapping structures. By using these solar cells as model systems, the charge transport mechanisms at the SWNT/Si interface are investigated using femtosecond transient absorption. Although primary photon absorption occurs in Si, transient absorption measurements show that SWNTs also generate and inject excited charge carriers to Si. Such effects can be tuned by controlling the thickness of the SWNTs. Findings from this study could open a new pathway for designing and improving the efficiency of photocarrier generation and absorption for high-performance ultrathin hybrid SWNT/Si solar cells.

Exploring a wider range of Mg-Ca-Zn metallic glass as biocompatible alloys using combinatorial sputtering.

In order to bypass the limitation of bulk metallic glasses fabrication, we synthesized thin film metallic glasses to study the corrosion characteristics of a wide atomic% composition range, Mg(35.9-63%)Ca(4.1-21%)Zn(17.9-58.3%), in simulated body fluid. We highlight a clear relationship between Zn content and corrosion current such that Zn-medium metallic glasses exhibit minimum corrosion. In addition, we found higher Zn content leads to a poor in vitro cell viability. These results showcase the benefit of evaluating a larger alloy compositional space to probe the limits of corrosion resistance and prescreen for biocompatible applications.