Formulation and nutritional evaluation of weaning food processed from cooking banana, supplemented with cowpea and peanut.

The possibility of processing a ready-to-eat nutrient-rich weaning food (WF) for infants within the age group of 0.5-0.9 years from cooking banana fortified with popular and affordable legumes (cowpea and peanut) was investigated with the aid of computer software and available technology in Nigeria. A composite of 47% cowpea, 40% ripe banana, and 13% peanut was processed, analyzed to compare the actual nutrient composition to that predicted by the software and that of two popular commercial WFs produced by Gerber Products Company: rice with banana (RB) and oats with banana (OB). Proximate composition was determined by Association of Official Analytical Chemists (AOAC) methods, in vitro digestibility by the pH drop method, and amino acid was determined using high performance liquid chromatography. Essential amino acid values were comparable to the predicted values. Protein and oil contents had values of 16.89% and 8.38%, 6.9% and 1.10%, and 12.03% and 3.16% for WF, RB, and OB, respectively. Octadecenoic (oleic) acid had the highest value of 3.65% followed by octadecadienoic (linoleic) acid with a value of 2.64% amounting to 76.69% of the total fatty acid. Total sugar content of WF was recorded as 15.96 g/100 g, with fructose having the highest value of 8.07 g/100 g, followed by dextrose with a value of 7.66 g/100 g. In vitro-digestibility was in the order OB>WF>RB. The results show that it is feasible to produce precooked WF which has the potential to meet the nutritional needs of an infant, from local staples using computer-assisted technique and inexpensive technology available in Nigeria.

Analysis of ingredient functionality and formulation optimization of pasta supplemented with peanut flour.

The working peanut pasta formulation range determined from a previous study was used to determine the effects of varying ingredient quantities and processing conditions on the pasta's quality and consumer acceptance. The variables studied were percent peanut flour substituted for durum wheat flour (30%, 40%, and 50%), amount of carrageenan (2.4%, 2.65%, and 2.9%), and drying temperature (60, 74, and 88 °C) on the final cooked pasta quality. Properties measured include color, texture, moisture content, and cooking loss. A home-use sensory test was conducted to determine consumer preferences and the optimum range for variables studied. Color lightness values ranged from 43.53 to 65.02, decreasing (becoming darker) with increased peanut flour level and increased drying temperature. Maximum cutting force for cooked pasta ranged from 1.59 N to 3.22 N, with higher values only for pasta dried at 88 °C. Moisture content ranged from 57.35% to 69.38%, and values decreased as drying temperature increased. Cooking loss ranged from 5.14% to 7.99%, increasing with higher levels of peanut flour and decreasing with higher levels of carrageenan. When prepared with 30% peanut flour and dried at 60 °C, the pasta was lighter in color, higher in moisture, and softer in texture than the varieties dried at higher temperatures and made with higher levels of peanut flour. Response surface analysis of consumer test data revealed that the optimum peanut pasta should contain between 35% and 45% peanut flour and should be dried between 60 and 71 °C; however, the pasta with 30% peanut flour was also a popular sample in the "favorite" categories. Practical Application: Most non-gluten protein fortification studies in durum wheat pasta found decreased firmness of dry and cooked pasta, increased cooking loss, increased stickiness, and darker product color when compared to traditional pasta. Partially defatted peanut flour is a versatile food ingredient and has high protein content. Since the lysine content of peanuts is higher than wheat, peanuts can be used to supplement wheat flour in food preparation. This study found by partially replacing wheat flour with peanut flour and with incorporation of hydrocolloid emulsifier, such as carrageenan or xanthan gum, dough viscosity, and pasta firmness significantly improved. Peanut pasta with high protein content and balanced amino acid profile can help support consumers with a healthy lifestyle.

Efficacy of gaseous chlorine dioxide as a sanitizer for killing Salmonella, yeasts, and molds on blueberries, strawberries, and raspberries.

Gaseous chlorine dioxide (ClO2) was tested for its effectiveness in killing Salmonella, yeasts, and molds on blueberries, strawberries, and red raspberries. An inoculum (100 microl, 6.0 to 6.8 log CFU/g of fruit) that contained five serotypes of Salmonella enterica was deposited on the skin, calyx tissue, or stem scar tissue of blueberries, skin or stem scar tissue of strawberries, and skin of red raspberries, dried for 2 h at 22 degrees C, then held for 20 h at 4 degrees C and 2 h at 22 degrees C before treatment. Sachets that contained reactant chemicals were formulated to release gaseous ClO2 at concentrations of 4.1, 6.2, and 8.0 mg/ liter of air within treatment times of 30, 60, and 120 min, respectively, at 23 +/- 1 degrees C. Lethality of ClO2 to Salmonella, yeasts, and molds was measured when fruits were in an atmosphere that contained 75 to 90% relative humidity. Treatment with 8.0 mg/liter of ClO2 significantly (alpha = 0.05) reduced the population of Salmonella on blueberries by 2.4 to 3.7 log CFU/g. Lethality was higher to cells in inoculum placed on the skin compared with the stem scar tissue. Populations of Salmonella on strawberries treated with 8.0 mg/liter of ClO2 were reduced by 3.8 to 4.4 log CFU/g; a significant reduction of 1.5 log CFU/g of raspberries was achieved. Treatment with 4.1 to 8.0 mg/liter of ClO2 caused reductions in populations of yeast and molds on blueberries, strawberries, and raspberries of 1.4 to 2.5, 1.4 to 4.2, and 2.6 to 3.0 log CFU/g, respectively. Treatment with 4.1 mg/liter of ClO2 did not markedly affect the sensory quality of fruits stored for up to 10 days at 8 degrees C. Results indicate that gaseous ClO2 has promise as a sanitizer for small fruits.

Thermal properties of cowpea flour: a study by differential scanning calorimetry.

The thermal properties of 12 varieties of cowpea flour were studied by differential scanning calorimetry (DSC). Flour samples were prepared to a paste of 60% moisture content and sealed in standard DSC pans. Samples were scanned at a heating rate of 5 degrees C/min over a scan range of 40- 130 degrees C. Samples exhibited single major endotherms, which occurred over varied temperatures. The transition enthalpy (deltaH) ranged between 1.4 J/g and 4.7 J/g. Transition onset (T(o)) and transition peak (T(p)) temperatures ranged between 75-78 degrees C and 78-82 degrees C,respectively. All the DSC parameters measured varied significantly among the varieties. The transition enthalpy (deltaH) was the most discriminating parameter and accounted for 80% of the total variance. The major chemical components of cowpea flour, starch amylose and protein are significant predictors of deltaH. Protein denaturation appears to be a significant modification which occurs during processing of cowpea seeds to flour. The transition enthalpy deltaH could become an important functional index of cowpea flour when related to some quality parameters in products that contain the flour.

Inactivation of Escherichia coli O157:H7, Salmonella enterica serotype enteritidis, and Listeria monocytogenes on lettuce by hydrogen peroxide and lactic acid and by hydrogen peroxide with mild heat.

Iceberg lettuce is a major component in vegetable salad and has been associated with many outbreaks of foodborne illnesses. In this study, several combinations of lactic acid and hydrogen peroxide were tested to obtain effective antibacterial activity without adverse effects on sensory characteristics. A five-strain mixture of Escherichia coli O157:H7, Salmonella enterica serotype Enteritidis, and Listeria monocytogenes was inoculated separately onto fresh-cut lettuce leaves, which were later treated with 1.5% lactic acid plus 1.5% hydrogen peroxide (H2O2) at 40 degrees C for 15 min, 1.5% lactic acid plus 2% H2O2 at 22 degrees C for 5 min, and 2% H2O2 at 50 degrees C for 60 or 90 s. Control lettuce leaves were treated with deionized water under the same conditions. A 4-log reduction was obtained for lettuce treated with the combinations of lactic acid and H2O2 for E. coli O157:H7 and Salmonella Enteritidis, and a 3-log reduction was obtained for L. monocytogenes. However, the sensory characteristics of lettuce were compromised by these treatments. The treatment of lettuce leaves with 2% H2O2 at 50 degrees C was effective not only in reducing pathogenic bacteria but also in maintaining good sensory quality for up to 15 days. A < or = 4-log reduction of E. coli O157:H7 and Salmonella Enteritidis was achieved with the 2% H2O2 treatment, whereas a 3-log reduction of L. monocytogenes was obtained. There was no significant difference (P > 0.05) between pathogen population reductions obtained with 2% H2O2 with 60- and 90-s exposure times. Hydrogen peroxide residue was undetectable (the minimum level of sensitivity was 2 ppm) on lettuce surfaces after the treated lettuce was rinsed with cold water and centrifuged with a salad spinner. Hence, the treatment of lettuce with 2% H2O2 at 50 degrees C for 60 s is effective in initially reducing substantial populations of foodborne pathogens and maintaining high product quality.