Debossed Contact Printing as a Patterning Method for Paper-Based Electronics.

The proliferation of printed electronic devices is feeding the growth of the Internet of Things, with devices deployed everywhere to collect and communicate data. At the same time, the increase in low-cost disposable devices is a cause for serious environmental concern. In particular, widely used plastic substrates such as poly(ethylene terephthalate) are persistent hazards to the environment. Paper is promising as a greener substrate for printed electronics because it is biodegradable and sourced from renewable materials as well as being low cost and compatible with roll-to-roll printing. However, the porous microstructure of paper promotes wicking of functional inks, leading to poor electrical performance and printing resolution. Hydrophobic coatings applied to the surface of paper create a planarized, printable surface, but these materials may compromise biodegradability and/or recyclability. This paper describes a new resist-free patterning method for printed paper-based electronics that takes advantage of the porous structure of paper. Debossed contact printing uses the pressure from a debossing tip to compress the porous structure of paper and create a patterned relief structure. Printing functional inks with an unpatterned roller deposits ink only on the raised regions of the relief structure. We demonstrate debossed contact printing of silver, carbon black, and conducting polymer inks and show that this new fabrication method is suitable for the fabrication of printed devices with dense features. We demonstrate the fabrication of antennas and patterned electrodes for RFID and smart wallpaper applications, respectively.

Wearable E-Textiles Using a Textile-Centric Design Approach.

Electronics worn on the body have the potential to improve human health and the quality of life by monitoring vital signs and movements, displaying information, providing self-illumination for safety, and even providing new routes for personal expression through fashion. Textiles are a part of daily life in clothing, making them an ideal platform for wearable electronics. The acceptance of wearable e-textiles hinges on maintaining the properties of textiles that make them compatible with the human body. Beneficial properties such as softness, stretchability, drapability, and breathability come from the 3D fibrous structures of knitted and woven textiles. However, these structures also present considerable challenges for the fabrication of wearable e-textiles. Fabrication methods used for modern electronic devices are designed for 2D planar substrates and are mostly unsuitable for the complex 3D structures of textiles. There is thus an urgent need to develop fabrication methods specifically for e-textiles to advance wearable electronics. Solution-based fabrication methods are a promising approach to fabricating wearable e-textiles, especially considering that textiles have been successfully modified using pigmented dyes in dyebaths and printing inks for thousands of years. In this Account, we discuss our research on the solution-based electroless metallization of textiles to fabricate conductive e-textiles that are building blocks for e-textile devices. Electroless metallization solutions fully permeate textile structures to deposit metallic coatings on the surfaces of individual textile fibers, maintaining the inherent textile structures and wearability. The resulting e-textiles are highly conductive, soft, and stretchable. We furthermore discuss ways to turn the challenges related to textile structures into new opportunities by strategically using the structural features of textiles for e-textile device design. We demonstrate this textile-centric approach to designing e-textile devices using two examples. We discuss how the structure of an ultrasheer knitted textile forms a useful framework for new e-textile transparent conductive electrodes and describe the implementation of these electrodes to form highly stretchable light-emitting e-textiles. We also show how the structural features of velour fabrics form the basis for an innovative "island-bridge" strain-engineering structure that enables the integration of brittle electroactive materials and protects them from strain-induced damage, leading to the fabrication of stretchable textile-based lithium-ion battery electrodes. With the vast variety of textile structures available, we highlight the opportunities associated with this textile-centric design approach to advance textile-based wearable electronics. Such advances depend on a deep understanding of the relationship between the textile structure and the device requirements, which may potentially lead to the development of new textile structures customized to support specific devices. We conclude with a discussion of the challenges that remain for the future of e-textiles, including durability, sustainability, and the development of performance standards.

Protocol for fabricating electroless nickel immersion gold strain sensors on nitrile butadiene rubber gloves for wearable electronics.

This protocol describes the fabrication of patterned conductive gold films on nitrile butadiene rubber (NBR) gloves for wearable strain sensors using electroless nickel immersion gold (ENIG) plating, a solution-based metallization technique. The resulting NBR/ENIG films are strain sensitive; resistance measurements of a patterned sensing array can be used to map human hand motions. This protocol also describes challenges related to the ENIG process and troubleshooting steps to achieve conformal gold films for strain sensing over a large working range. For complete details on the use and execution of this protocol, please refer to Mechael et al. (2021).

Ready-to-wear strain sensing gloves for human motion sensing.

Integrating soft sensors with wearable platforms is critical for sensor-based human augmentation, yet the fabrication of wearable sensors integrated into ready-to-wear platforms remains underdeveloped. Disposable gloves are an ideal substrate for wearable sensors that map hand-specific gestures. Here, we use solution-based metallization to prepare resistive sensing arrays directly on off-the-shelf nitrile butadiene rubber (NBR) gloves. The NBR glove acts as the wearable platform while its surface roughness enhances the sensitivity of the overlying sensing array. The NBR sensors have a sheet resistance of 3.1 ± 0.6 Ω/sq and a large linear working range (two linear regions ≤70%). When stretched, the rough NBR substrate facilitates microcrack formation in the overlying metal, enabling high gauge factors (62 up to 40% strain, 246 from 45 - 70% strain) that are unprecedented for metal film sensors. We apply the sensing array to dynamically monitor gestures for gesture differentiation and robotic control.

Velour Fabric as an Island-Bridge Architectural Design for Stretchable Textile-Based Lithium-ion Battery Electrodes.

The advancement of wearable electronics depends on the seamless integration of lightweight and stretchable energy storage devices with textiles. Integrating brittle energy storage materials with soft and stretchable textiles, however, presents a challenging mechanical mismatch. It is critical to protect brittle energy storage materials from strain-induced damage and at the same time preserve the softness and stretchability of the functionalized e-textile. Here, we demonstrate the strategic use of a warp-knitted velour fabric in an "island-bridge" architectural strain-engineering design to prepare stretchable textile-based lithium-ion battery (LIB) electrodes. The velour fabric consists of a warp-knitted framework and a cut pile. We integrate the LIB electrode into this fabric by solution-based metallization to create the warp-knitted framework current collector "bridges" followed by selective deposition of the brittle electroactive material CuS on the cut pile "islands". As the textile electrode is stretched, the warp-knitted framework current collector elongates, while the electroactive cut pile fibers simply ride along at their anchor points on the framework, protecting the brittle CuS coating from strain and subsequent damage. The textile-based stretchable LIB electrode exhibited excellent electrical and electrochemical performance with a current collector sheet resistance of 0.85 ± 0.06 Ω/sq and a specific capacity of 400 mAh/g at 0.5 C for 300 charging-discharging cycles as well as outstanding rate capability. The electrical performance and charge-discharge cycling stability of the electrode persisted even after 1000 repetitive stretching-releasing cycles, demonstrating the protective functionality of the textile-based island-bridge architectural strain-engineering design.