Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
RSC Adv ; 11(51): 32505-32512, 2021 Sep 27.
Artigo em Inglês | MEDLINE | ID: mdl-35495483

RESUMO

The epoxidation of ethylene-propylene-diene rubber (EPDM) with 5-ethylidene-2-norbornene (ENB) as the diene to epoxidized EPDM (eEPDM) creates additional routes to cross-linking and reactive blending, as well as increasing the polarity and thereby the adhesion to polar materials, e.g., mineral fillers such as silica. The low solubility of apolar, high molecular weight polymers in the polar solvents constrains the catalytic method for epoxidation that can be applied. Here we have applied an in situ prepared catalyst comprising a manganese(ii) salt, sodium picolinate and a ketone to the epoxidation of EPDM rubber with hydrogen peroxide (H2O2) as the oxidant in a solvent mixture, that balances the need for polymer and catalyst/oxidant miscibility and solubility. Specifically, a mixture of cyclohexane and cyclohexanone is used, where cyclohexanone functions as a co-solvent as well as the ketone reagent. Reaction progress was monitored off-line through a combination of Raman and ATR-FTIR spectroscopies, which revealed that the reaction profile and the dependence on the composition of the catalyst are similar to those observed with low molar mass alkene substrates, under similar reaction conditions. The combination of spectroscopies offers a reliable method for off-line reaction monitoring of both the extent of the conversion of unsaturation (Raman) and the extent of epoxidation (FTIR) as well as determining side reactions, such as epoxide ring opening and further, aerobic oxidation. The epoxidation of EPDM described, in contrast to currently available methods, uses a non-scarce manganese catalyst and H2O2, and avoids side reactions, such as those that can occur with peracids.

2.
European J Org Chem ; 2019(42): 7151-7158, 2019 Nov 14.
Artigo em Inglês | MEDLINE | ID: mdl-31866758

RESUMO

A one-pot multi-step method for the oxidative cleavage of alkenes to aldehydes/ketones under ambient conditions is described as an alternative to ozonolysis. The first step is a highly efficient manganese catalyzed epoxidation/cis-dihydroxylation of alkenes. This step is followed by an Fe(III) assisted ring opening of the epoxide (where necessary) to a 1,2-diol. Carbon-carbon bond cleavage is achieved by treatment of the diol with sodium periodate. The conditions used in each step are not only compatible with the subsequent step(s), but also provide for increased conversion compared to the equivalent reactions carried out on the isolated intermediate compounds. The described procedure allows for carbon-carbon bond cleavage in the presence of other alkenes, oxidation sensitive moieties and other functional groups; the mild conditions (r.t.) used in all three steps make this a viable general alternative to ozonolysis and especially for use under flow or continuous batch conditions.

3.
ACS Sens ; 4(10): 2838-2845, 2019 10 25.
Artigo em Inglês | MEDLINE | ID: mdl-31571480

RESUMO

This manuscript describes the production of molecularly imprinted polymer nanoparticles (nanoMIPs) for the cardiac biomarkers heart-fatty acid binding protein (H-FABP) and ST2 by solid-phase synthesis, and their use as synthetic antibodies in a multiplexed sensing platform. Analysis by surface plasmon resonance (SPR) shows that the affinity of the nanoMIPs is similar to that of commercially available antibodies. The particles are coated onto the surface of thermocouples and inserted into 3D-printed flow cells of different multiplexed designs. We demonstrate that it is possible to selectively detect both cardiac biomarkers within the physiologically relevant range. Furthermore, the developed sensor platform is the first example of a multiplex format of this thermal analysis technique which enables simultaneous measurements of two different compounds with minimal cross selectivity. The format where three thermocouples are positioned in parallel exhibits the highest sensitivity, which is explained by modeling the heat flow distribution within the flow cell. This design is used in further experiments and proof-of-application of the sensor platform is provided by measuring spiked fetal bovine serum samples. Because of the high selectivity, short measurement time, and low cost of this array format, it provides an interesting alternative to traditional immunoassays. The use of nanoMIPs enables a multimarker strategy, which has the potential to contribute to sustainable healthcare by improving the reliability of cardiac biomarker testing.


Assuntos
Técnicas Biossensoriais , Proteína 3 Ligante de Ácido Graxo/sangue , Proteína 1 Semelhante a Receptor de Interleucina-1/sangue , Impressão Molecular , Biomarcadores/sangue , Nanopartículas/química , Ressonância de Plasmônio de Superfície
4.
ChemSusChem ; 12(13): 3126-3133, 2019 Jul 05.
Artigo em Inglês | MEDLINE | ID: mdl-31001914

RESUMO

The upgrading of complex bio-renewable feedstock, such as lignocellulose, through depolymerisation benefits from the selective reactions at key functional groups. Applying homogeneous catalysts developed for selective organic oxidative transformations to complex feedstock such as lignin is challenged by the presence of interfering components. The selection of appropriate model compounds is essential in applying new catalytic systems and identifying such interferences. Here, it was shown by using as an example the oxidation of a model substrate containing a ß-O-4 linkage with H2 O2 and an in situ-prepared manganese-based catalyst, capable of efficient oxidation of benzylic alcohols, that interference from compounds liberated during the reaction can prevent its application to lignocellulose depolymerisation.

5.
Langmuir ; 35(17): 5779-5786, 2019 04 30.
Artigo em Inglês | MEDLINE | ID: mdl-30673292

RESUMO

Nosocomial infections are a major problem in medical health care. To solve this problem, a series of antimicrobial waterborne paints were prepared by using antimicrobial hyperbranched (HB) emulsifiers. The HB-emulsifiers were prepared by polymerizing AB2 monomers obtained in a one-step reaction of bis(hexamethylene)triamine and carbonyl biscaprolactam. The blocked isocyanate end groups (B groups) of the HB-polymer were utilized to introduce tertiary amino groups through the reaction with compounds comprising either a hydroxyl or a primary amino group and a tertiary amino group. Quaternization of the tertiary amines with 6 different alkyl bromides resulted in 12 amphiphilic cationic species. The 12 emulsifiers showed the successful inhibition and killing of 8 bacterial and 2 fungal strains. The killing efficacy increased with increasing alkyl chain length. The octyl-functionalized compound was chosen for suspension polymerizations because of the good compromise between killing and emulsifying properties. With this emulsifier, aqueous poly(methacrylate) suspensions were prepared, which were stable and had excellent killing properties.


Assuntos
Antibacterianos/farmacologia , Emulsificantes/farmacologia , Pintura , Acinetobacter baumannii/efeitos dos fármacos , Antibacterianos/síntese química , Antibacterianos/química , Candida albicans/efeitos dos fármacos , Candida parapsilosis/efeitos dos fármacos , Emulsificantes/síntese química , Emulsificantes/química , Testes de Sensibilidade Microbiana , Estrutura Molecular , Staphylococcus/efeitos dos fármacos
6.
European J Org Chem ; 2017(46): 6919-6925, 2017 12 15.
Artigo em Inglês | MEDLINE | ID: mdl-29398954

RESUMO

α-Hydroxy ketones are valuable synthons in organic chemistry. Here we show that oxidation of vic-diols to α-hydroxy ketones with H2O2 can be achieved with an in situ prepared catalyst based on manganese salts and pyridine-2-carboxylic acid. Furthermore the same catalyst is effective in alkene epoxidation, and it is shown that alkene oxidation with the MnII catalyst and H2O2 followed by Lewis acid ring opening of the epoxide and subsequent oxidation of the alkene to α-hydroxy ketones can be achieved under mild (ambient) conditions.

7.
Chemphyschem ; 17(17): 2654-9, 2016 Sep 05.
Artigo em Inglês | MEDLINE | ID: mdl-27258159

RESUMO

The effect of the catalytic moiety on the early-time photodynamics of Ru/M (M=Pt or Pd) bimetallic photocatalysts is studied by ultrafast transient absorption spectroscopy. In comparison to the Ru/Pd photocatalyst described earlier, the Ru/Pt analogue shows complex excited-state dynamics with three distinct kinetic components ranging from sub-ps to 10(2)  ps, requiring a more sophisticated photophysical model than that developed earlier for the Ru/Pd complex. In the Pu/Pt photocatalyst, an additional lower-lying excited state is proposed to quench the hot higher-lying triplet metal-to-ligand charge-transfer states. Furthermore, a strong excitation wavelength dependence on the population of excited states is observed for both the Ru/Pt and Ru/Pd complexes, indicating a non-equilibrated distribution even on the 10(2)  ps timescale. These insights shed light on the significant impact of the catalytic moiety on the fundamental early-time photophysics of Ru-based photocatalysts.

8.
ChemSusChem ; 6(9): 1774-8, 2013 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-24009102

RESUMO

An efficient and simple method for selective oxidation of secondary alcohols and oxidation of alkanes to ketones is reported. An in situ prepared catalyst is employed based on manganese(II) salts, pyridine-2-carboxylic acid, and butanedione, which provides good-to-excellent conversions and yields with high turnover numbers (up to 10 000) with H2 O2 as oxidant at ambient temperatures. In substrates bearing multiple alcohol groups, secondary alcohols are converted to ketones selectively and, in general, benzyl C-H oxidation proceeds in preference to aliphatic C-H oxidation.


Assuntos
Álcoois/química , Carbono/química , Peróxido de Hidrogênio/química , Hidrogênio/química , Cetonas/química , Manganês/química , Catálise , Oxirredução , Especificidade por Substrato
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...