Re-engineering the innovator-clinic interface for adoption of advanced therapies.

The relationship between regenerative medicine innovators and the clinics that will use their inventions continues to evolve. In the UK, the Advanced Therapy Treatment Centres exemplify this. The agents in the value chain are becoming collaborators in a shared innovation process. This paper proposes a larger role for systems engineering in this change and a cost-based representation of institutional readiness in designing suitable operational models for clinical adoption. The proposed approach places this value in a whole-lifetime cost framework. The current value for the adoption process can then be estimated for comparison with the sum of the adoption costs, the costs of operating at steady state and, if need be, replacement costs at end of life of the innovation.

Quantifying Operator Subjectivity within Flow Cytometry Data Analysis as a Source of Measurement Uncertainty and the Impact of Experience on Results.

Flow cytometry is a complex measurement characterization technique, utilized within the manufacture, measurement, and release of cell and gene therapy products for rapid, high-content, and multiplexed discriminatory cell analysis. A number of factors influence the variability in the measurement reported including, but not limited to, biological variation, reagent variation, laser and optical configurations, and data analysis methods. This research focused on understanding the contribution of manual operator variability within the data analysis phase. Thirty-eight participants completed a questionnaire, providing information about experience and motivational factors, before completing a simple gating study. The results were analyzed using gauge repeatability and reproducibility techniques to quantify participant uncertainty. The various stages of the gating sequence were combined through summation in quadrature and expanded to give each participant a representative uncertainty value. Of the participants surveyed, 85% preferred manual gating to automated data analysis, with the primary reasons being legacy ("it's always been done that way") and accuracy, not in the metrological sense but in the clear definition of the correct target population. The median expanded uncertainty was calculated as 3.6% for the population studied, with no significant difference among more or less experienced users. Operator subjectivity can be quantified to include within measurement uncertainty budgets, required for various standards and qualifications. An emphasis on biomanufacturing measurement terminology is needed to help understand future and potential solutions, possibly looking at translational clinical models to engage and enhance better training and protocols within industrial and research settings.

The management of risk and investment in cell therapy process development: a case study for neurodegenerative disease.

Cell-based therapies must achieve clinical efficacy and safety with reproducible and cost-effective manufacturing. This study addresses process development issues using the exemplar of a human pluripotent stem cell-based dopaminergic neuron cell therapy product. Early identification and correction of risks to product safety and the manufacturing process reduces the expensive and time-consuming bridging studies later in development. A New Product Introduction map was used to determine the developmental requirements specific to the product. Systematic Risk Analysis is exemplified here. Expected current value-based prioritization guides decisions about the sequence of process studies and whether and if an early abandonment of further research is appropriate. The application of the three tools enabled prioritization of the development studies.

Centralised versus decentralised manufacturing and the delivery of healthcare products: A United Kingdom exemplar.

BACKGROUND: The cell and gene therapy (CGT) field is at a critical juncture. Clinical successes have underpinned the requirement for developing manufacturing capacity suited to patient-specific therapies that can satisfy the eventual demand post-launch. Decentralised or 'redistributed' manufacturing divides manufacturing capacity across geographic regions, promising local, responsive manufacturing, customised to the end user, and is an attractive solution to overcome challenges facing the CGT manufacturing chain. METHODS: A study was undertaken building on previous, so far unpublished, semi-structured interviews with key opinion leaders in advanced therapy research, manufacturing and clinical practice. The qualitative findings were applied to construct a cost of goods model that permitted the cost impact of regional siting to be combined with variable and fixed costs of manufacture of a mesenchymal stromal cell product. RESULTS: Using the United Kingdom as an exemplar, cost disparities between regions were examined. Per patient dose costs of ~£1,800 per 75,000,000 cells were observed. Financial savings from situating the facility outside of London allow 25-41 additional staff or 24-35 extra manufacturing vessels to be employed. Decentralised quality control to mitigate site-to-site variation was examined. Partial decentralisation of quality control was observed to be financially possible and an attractive option for facilitating release 'at risk'. DISCUSSION: There are important challenges that obstruct the easy adoption of decentralised manufacturing that have the potential to undermine the market success of otherwise promising products. By using the United Kingdom as an exemplar, the modelled data provide a framework to inform similar regional policy considerations across other global territories.

Cell therapy-processing economics: small-scale microfactories as a stepping stone toward large-scale macrofactories.

AIM: Manufacturing methods for cell-based therapies differ markedly from those established for noncellular pharmaceuticals and biologics. Attempts to 'shoehorn' these into existing frameworks have yielded poor outcomes. Some excellent clinical results have been realized, yet emergence of a 'blockbuster' cell-based therapy has so far proved elusive. MATERIALS & METHODS: The pressure to provide these innovative therapies, even at a smaller scale, remains. In this process, economics research paper, we utilize cell expansion research data combined with operational cost modeling in a case study to demonstrate the alternative ways in which a novel mesenchymal stem cell-based therapy could be provided at small scale. RESULTS & CONCLUSIONS: This research outlines the feasibility of cell microfactories but highlighted that there is a strong pressure to automate processes and split the quality control cost-burden over larger production batches. The study explores one potential paradigm of cell-based therapy provisioning as a potential exemplar on which to base manufacturing strategy.

Decentralised manufacturing of cell and gene therapy products: Learning from other healthcare sectors.

Decentralised or 'redistributed' manufacturing represents an attractive choice for production of some cell and gene therapies (CGTs), in particular personalised therapies. Decentralised manufacturing splits production into various locations or regions and in doing so, imposes organisational changes on the structure of a company. This confers a significant advantage by democratising supply, creating jobs without geographical restriction to the central hub and allowing a more flexible response to external pressures and demands. This comes with challenges that need to be addressed including, a reduction in oversight, decision making and control by central management which can be critical in maintaining quality in healthcare product manufacturing. The unwitting adoption of poor business strategies at an early stage in development has the potential to undermine the market success of otherwise promising products. To maximise the probability of realising the benefits that decentralised manufacturing of CGTs has to offer, it is important to examine alternative operational paradigms to learn from their successes and to avoid their failures. Whilst no other situation is quite the same as CGTs, some illustrative examples of established manufacturing paradigms are described. Each of these shares a unique attribute with CGTs which aids understanding of how decentralised manufacturing might be implemented for CGTs in a similar manner. In this paper we present a collection of paradigms that can be drawn on in formulating a roadmap to success for decentralised production of CGTs.

Decentralized manufacturing of cell and gene therapies: Overcoming challenges and identifying opportunities.

Decentralized or "redistributed" manufacturing has the potential to revolutionize the manufacturing approach for cell and gene therapies (CGTs), moving away from the "Fordist" paradigm, delivering health care locally, customized to the end user and, by its very nature, overcoming many of the challenges associated with manufacturing and distribution of high volume goods. In departing from the traditional centralized model of manufacturing, decentralized manufacturing divides production across sites or geographic regions. This paradigm shift imposes significant structural and organisational changes on a business presenting both hidden challenges that must be addressed and opportunities to be embraced. By profoundly adapting business practices, significant advantages can be realized through a democratized value chain, creation of professional-level jobs without geographic restriction to the central hub and a flexibility in response to external pressures and demands. To realize these potential opportunities, however, advances in manufacturing technology and support systems are required, as well as significant changes in the way CGTs are regulated to facilitate multi-site manufacturing. Decentralized manufacturing is likely to be the manufacturing platform of choice for advanced health care therapies-in particular, those with a high degree of personalization. The future success of these promising products will be enhanced by adopting sound business strategies early in development. To realize the benefits that decentralized manufacturing of CGTs has to offer, it is important to examine both the risks and the substantial opportunities present. In this research, we examine both the challenges and the opportunities this shift in business strategy represents in an effort to maximize the success of adoption.

Comparability: manufacturing, characterization and controls, report of a UK Regenerative Medicine Platform Pluripotent Stem Cell Platform Workshop, Trinity Hall, Cambridge, 14-15 September 2015.

This paper summarizes the proceedings of a workshop held at Trinity Hall, Cambridge to discuss comparability and includes additional information and references to related information added subsequently to the workshop. Comparability is the need to demonstrate equivalence of product after a process change; a recent publication states that this 'may be difficult for cell-based medicinal products'. Therefore a well-managed change process is required which needs access to good science and regulatory advice and developers are encouraged to seek help early. The workshop shared current thinking and best practice and allowed the definition of key research questions. The intent of this report is to summarize the key issues and the consensus reached on each of these by the expert delegates.

Putting a price tag on novel autologous cellular therapies.

Cell therapies, especially autologous therapies, pose significant challenges to researchers who wish to move from small, probably academic, methods of manufacture to full commercial scale. There is a dearth of reliable information about the costs of operation, and this makes it difficult to predict with confidence the investment needed to translate the innovations to the clinic, other than as small-scale, clinician-led prescriptions. Here, we provide an example of the results of a cost model that takes into account the fixed and variable costs of manufacture of one such therapy. We also highlight the different factors that influence the product final pricing strategy. Our findings illustrate the need for cooperative and collective action by the research community in pre-competitive research to generate the operational models that are much needed to increase confidence in process development for these advanced products.

A 3D bioprinting exemplar of the consequences of the regulatory requirements on customized processes.

Computer-aided 3D printing approaches to the industrial production of customized 3D functional living constructs for restoration of tissue and organ function face significant regulatory challenges. Using the manufacture of a customized, 3D-bioprinted nasal implant as a well-informed but hypothetical exemplar, we examine how these products might be regulated. Existing EU and USA regulatory frameworks do not account for the differences between 3D printing and conventional manufacturing methods or the ability to create individual customized products using mechanized rather than craft approaches. Already subject to extensive regulatory control, issues related to control of the computer-aided design to manufacture process and the associated software system chain present additional scientific and regulatory challenges for manufacturers of these complex 3D-bioprinted advanced combination products.

Pullulan: a new cytoadhesive for cell-mediated cartilage repair.

INTRODUCTION: Local delivery of mesenchymal stem cells (MSCs) to the acutely injured or osteoarthritic joint retards cartilage destruction. However, in the absence of assistive materials the efficiency of engraftment of MSCs to either intact or fibrillated cartilage is low and localization is further reduced by natural movement of the joint surfaces. It is hypothesised that enhanced engraftment of the delivered MSCs at the cartilage surface will increase their reparative effect and that the application of a bioadhesive to the degraded cartilage surface will provide improved cell retention. Pullulan is a structurally flexible, non-immunogenic exopolysaccharide with wet-stick adhesive properties and has previously been used for drug delivery via the wet surfaces of the buccal cavity. In this study, the adhesive character of pullulan was exploited to enhance MSC retention on the damaged cartilage surface. METHODS: MSCs labeled with PKH26 were applied to pullulan-coated osteoarthritic cartilage explants to measure cell retention. Cytocompatability was assessed by measuring the effects of prolonged exposure to the bioadhesive on MSC viability and proliferation. The surface phenotype of the cells was assessed by flow cytometry and their multipotent nature by measuring osteogenic, adipogenic and chrondrogenic differentiation. Experiments were also carried out to determine expression of the C-type lectin Dectin-2 receptor. RESULTS: MSCs maintained a stable phenotype following exposure to pullulan in terms of metabolic activity, proliferation, differentiation and surface antigen expression. An increase in osteogenic activity and Dectin-2 receptor expression was seen in MSCs treated with pullulan. Markedly enhanced retention of MSCs was observed in explant culture of osteoarthritic cartilage. CONCLUSIONS: Pullulan is a biocompatible and effective cytoadhesive material for tissue engraftment of MSCs. Prolonged exposure to pullulan has no negative impact on the phenotype, viability and differentiation potential of the cells. Pullulan dramatically improves the retention of MSCs at the fibrillated surface of osteoarthritic articular cartilage. Pullulan causes an upregulation in expression of the Dectin-2 C-type lectin transmembrane complex.