Development and validation of a stability-indicating high performance liquid chromatographic (HPLC) assay for biperiden in bulk form and pharmaceutical dosage forms.

Current compendial (USP) methods of assay for the analysis of biperiden in bulk form and pharmaceutical dosage forms involve the use of titrimetric and spectrophotometric procedures, respectively. These are non-selective and non-stability-indicating techniques. In this work, a stability-indicating high performance liquid chromatographic assay procedure has been developed and validated for biperiden. The liquid chromatographic separation was achieved isocratically on a symmetry C8 column (150 mm x 3.9 mm i.d., 5 microm particle size) using a mobile phase containing methanol-buffer (50:50, v/v, pH 2.50) at a flow rate of 1 ml/min and UV detection at 205 nm. The buffer was composed of sodium dihydrogen phosphate (50 mM) and 1-heptanesulfonic acid sodium salt (5 mM). The method was linear over the concentration range of 0.5-25 microg/ml (r=0.9998) with a limit of detection and quantitation 0.03 and 0.1 microg/ml, respectively. The method has the requisite accuracy, selectivity, sensitivity and precision to assay biperiden in bulk form and pharmaceutical dosage forms. Degradation products resulting from the stress studies did not interfere with the detection of biperiden and the assay is thus stability-indicating.

In vitro release studies of piroxicam from oil-in-water creams and hydroalcoholic gel topical formulations.

The importance of piroxicam, a therapeutic anti-inflammatory drug, is well known. Because of gastrointestinal disorders, dermatological dosage forms are recommended most. In our first studies, oil-in-water (O/W) creams of piroxicam (1% concentration) were prepared using glyceryl monostearate (GMS), stearic acid, and triethanolamine as additive ingredients. In our second studies, hydroalcoholic transparent gel formulations of this drug in a 0.5% concentration were prepared using hydroxypropylcellulose (HPC) as the gelling agent. The release of piroxicam from all formulations via dialysis through a cellulose membrane into phosphate buffer pH 6.8 at 37 degrees C was studied. The effects of additives such as propylene glycol and 2-propanol on the drug release were also investigated. The release profiles from the standpoint of diffusion-controlled processes, as well as zero-order and first-order kinetics, were evaluated, and relevant parameters, such as diffusion coefficient, permeability coefficient, and partition coefficient, were calculated. The release obeys both the diffusion mechanism and first-order kinetics. The drug release from gel formulations containing 10%, 20%, and 30% propylene glycol was decreased due to the enhancement of viscosity. However, the limpidity of these formulations was improved. Moreover, the release of drug from gel formulations containing 15% and 20% of 2-propanol was increased. These results show that a hydroalcoholic gel formulation with HPC is a more suitable preparation of piroxicam when compared with an O/W cream formulation.