Green Synthetic Approach for the Preparation of Blue Emitting Gold Nanoclusters: A Simple Analytical Method for Detection of Hexaconazole Fungicide.

Blue emissive Argyreia nervosa-capped gold nanoclusters (A. nervosa-AuNCs) were synthesized via a simple environment-friendly method. The developed probe exhibits rapid response towards the target analyte (hexaconazole fungicide). Several characterizations, including FT-IR, UV-visible, fluorescence, HR-TEM, XPS, and fluorescence lifetime, were studied to confirm the formation of A. nervosa-AuNCs. The A. nervosa-AuNCs displayed emission and excitation peaks at 470 and 390 nm, respectively. Furthermore, the quantum yield (QY) of A. nervosa-AuNCs was 21.25%. The as-synthesized A. nervosa-AuNCs showed a good linear response with hexaconazole in the concentration range of 0.025-180 µM, with a detection limit (LOD) of 21.94 nM, indicating A. nervosa-AuNCs could be used as a sensitive and selective probe for detecting hexaconazole through a fluorescence "turn-off" mechanism. The A. nervosa-AuNCs were successfully used to detect hexaconazole in real samples. Moreover, A. nervosa-AuNCs were used as a bio-imaging probe for visualization of Saccharomyces cerevisiae cells.

Development of Simple Fluorescence Analytical Strategy for the Detection of Triazophos Using Greenish-Yellow Emissive Carbon Dots Derived from Curcuma longa.

This study describes a new method for synthesizing water-soluble carbon dots (CDs) using "Curcuma longa" (green source) named CL-CDs via a single-step hydrothermal process. The as-synthesized CL-CDs exhibited greenish-yellow fluorescence at 548 nm upon excitation at 440 nm. It shows good water stability and exhibits a quantum yield of 19.4%. The developed probe is utilized for sensing triazophos (TZP) pesticide via a dynamic quenching mechanism, exhibiting favorable linearity ranging from 0.5-500 µM with a limit of detection of 0.0042 µM. The as-prepared CL-CDs probe was sensitive and selective towards TZP. Lastly, the successful application of the CL-CDs-based fluorescent probe in water and rice samples highlights its potential as a reliable and efficient method for the detection of TZP in various real sample matrices. Eventually, bioimaging and biocompatibility aspects of CL-CDs have been assessed on Saccharomyces cerevisiae (yeast) cell and lung cancer (A549) cell lines, respectively.

Development of Copper Nanoclusters-Based Turn-Off Nanosensor for Fluorescence Detection of Two Pyrethroid Pesticides (Cypermethrin and Lambda-Cyhalothrin).

Fluorescent copper nanoclusters (Cu NCs) were synthesized by using Withania somnifera (W. somnifera) plant extract as a biotemplate. Aqueous dispersion of W. somnifera-Cu NCs displays intense emission peak at 458 nm upon excitation at 350 nm. This fluorescence emission was utilized for the detection of two pyrethroid pesticides (cypermethrin and lambda-cyhalothrin) via "turn-off" mechanism. Upon the addition of two pyrethiod pesticides independently, the fluorescence emission of W. somnifera-Cu NCs was gradually decreased with increasing concentrations of both pesticides. It was noticed that the decrease in emission intensity at 458 nm was linearly dependent on the logarithm of both pesticides concentrations in the ranges of 0.01-100 µM and of 0.05-100 µM for cypermethrin and lambda-cyhalothrin, respectively. Consequently, the limits of detection were found to be 27.06 and 23.28 nM for cypermethrin and lambda-cyhalothrin, respectively. The as-fabricated W. somnifera-Cu NCs acted as a facile sensor for the analyses of cypermethrin and lambda-cyhalothrin in vegetables (tomato and bottle gourd), which demonstrates that it could be used as portable sensing platform for assaying of two pyrethroid pesticides in food samples.

Synthesis of Greenish-Yellow Fluorescent Copper Nanocluster for the Selective and Sensitive Detection of Fipronil Pesticide in Vegetables and Grain Samples.

In this paper, a new synthetic route is introduced for the synthesis of high-luminescent greenish-yellow fluorescent copper nanoclusters (PVP@A. senna-Cu NCs) using Avaram senna (A. senna) and polyvinylpyrrolidone (PVP) as templates. A. senna plant extract mainly contains variety of phytochemicals including glycosides, sugars, saponins, phenols, and terpenoids that show good pharmacological activities such as anti-inflammatory, antioxidant, and antidiabetic. PVP is a stable and biocompatible polymer that is used as a stabilizing agent for the synthesis of PVP@A. senna-Cu NCs. The size, surface functionality, and element composition of the fabricated Cu NCs were confirmed by various analytical techniques. The as-prepared greenish-yellow fluorescent Cu NCs exhibit significant selectivity towards fipronil, thereby favoring to assay fipronil pesticide with good linearity in the range of 3.0-30 µM with a detection limit of 65.19 nM. More importantly, PVP@A. senna-Cu NCs are successfully applied to assay fipronil in vegetable and grain samples.

Fluorescence "Turn OFF-ON" detection of Fe3+ and propiconazole pesticide using blue emissive carbon dots from lemon peel.

In this study, water-soluble carbon dots (CDs) were employed as a novel fluorescence "turn OFF-ON" sensor to detect Fe3+ ions in pharmaceutical sample and propiconazole (PC) in food samples. Blue fluorescent "LPCDs" are synthesized from the lemon peel that exhibited emission at 468 nm when excited at 378 nm. The average size of the as-prepared LPCDs is 2.03 nm, displaying a quantum yield of 32 %. Fluorescence "turn OFF-ON" strategy was developed for sensing of Fe3+ ion and PC, demonstrating favorable linearity in the range of 0.5-180 µM and 0.1-40 µM with the detection limits of 0.18 µM and 0.054 µM for Fe3+ and PC, respectively. Further, LPCDs-loaded cellulose paper was used as visual reader to detect Fe3+ and PC. This approach was effectively applied to detect Fe3+ and PC in pharmaceutical and vegetable samples.

An overview of molecular biology and nanotechnology based analytical methods for the detection of SARS-CoV-2: promising biotools for the rapid diagnosis of COVID-19.

Currently, the 2019 novel coronavirus (2019-nCoV) is drastically affecting 214 countries, causing severe pneumonia in patients, which has resulted in lockdown being implemented in several countries to stop its local transmission. Considering this, the rapid screening and accurate detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2; 2019-nCoV) play an essential role in the diagnosis of COVID-19, which can minimize local transmission and prevent an epidemic. Due to this public health emergency, the development of ultra-fast reliable diagnostic kits is essential for the diagnosis of COVID-19. Recently, molecular biology and nanotechnology based analytical methods have proven to be promising diagnostic tools for the rapid screening of 2019-nCoV with high accuracy and precision. The main aim of this review is to provide a retrospective overview on the molecular biology tools (reverse transcription polymerase chain reaction (RT-PCR) and reverse transcription loop-mediated isothermal amplification (RT-LAMP)) and nanotechnology based analytical tools (enzyme-linked immunosorbent assay (ELISA), RT-PCR, and lateral flow assay) for the rapid diagnosis of COVID-19. This review also presents recent reports on other analytical techniques including paper spray mass spectrometry for the diagnosis of COVID-19 in clinical samples. Finally, we provide a quick reference on molecular biology and nanotechnology based analytical tools for COVID-19 diagnosis in clinical samples.

Influence of ligand chemistry on silver nanoparticles for colorimetric detection of Cr3+ and Hg2+ ions.

In this work, we describe the role of ligand chemistry on the surfaces of silver nanoparticles (Ag NPs) for tuning their analytical applications. The citrate and melamine (MA) molecules were used as ligands for the surface modification of Ag NPs. The addition of Cr3+ ion in citrate-Ag NPs (Cit-Ag NPs) and of Hg2+ ion in melamine-Ag NPs (MA-Ag NPs) cause Ag NPs aggregation, and are accompanied by a color change and a red-shift. The resulting distinctly visual readouts are favorable for colorimetric detection of Cr3+ and Hg2+ ions. Under optimal conditions, the linear ranges are observed in the concentration ranges of 1.0-50.0 and of 10.0-100.0 µM, and with detection limit of 0.52 and 1.80 µM for Cr3+ and Hg2+ ions. The simultaneous detection of Cr3+ and Hg2+ ion is driven by the changing the ligand chemistry on the surfaces of Ag NPs that allows to tune their specific interactions with target analytes. Finally, the functionalized Ag NPs were successfully applied to detect Cr3+ and Hg2+ ions in water samples with satisfactory recoveries.

Green Synthetic Approach for Synthesis of Fluorescent Carbon Dots for Lisinopril Drug Delivery System and their Confirmations in the Cells.

In this work, highly luminescent carbon dots (CDs) were synthesized by the hydrothermal method at 170 °C for 12 h using pasteurized milk as a carbon source. The prepared CDs exhibited bright blue fluorescence under UV light illumination at 365 nm. The CDs show fluorescence life time of ~4.89 ns at excitation wavelength of 370 nm. The effect of different solvents on the fluorescence property of CDs was also investigated. The lisinopril (Lis)-loaded CDs were fabricated by self-assembly of lisinopril on the surfaces of CDs, which were characterized by UV-visible and FT-IR spectroscopic techniques. The controlled release of lisinopril from the Lis-CDs was realized at pH values of 5.2, 6.2 and 7.4, respectively. The results of the cytotoxicity and confocal laser scanning microscopic images indicate that the Lis-CDs were successfully uptaken by HeLa cells without apparent cytotoxicity. The synthesized CDs show great potential as drug vehicles with good biocompatibility, sustained release of lisinopril from CDs, indicating that the CDs can act as a promising drug delivery system for therapeutic delivery and/or bioimaging applications.

Surface modified quantum dots as fluorescent probes for biomolecule recognition.

The development of novel nanomaterial-based analytical methods for biological analysis in proteomics and clinical diagnosis has been making significant progress. In the long-lasting efforts to improve the detection sensitivity of analytical instruments, functional nanomaterials have been significantly applied as effective probes by integrating various analytical tools for bioanalysis. Among these nanomaterials, quantum dots (QDs) have been recently proved as highly potential materials as fluorescent sensors for biomolecules assays due to their high quantum yield, narrow and tunable emission spectrum and excellent photostability. In this review, we introduce the use of surface modified QDs as fluorescence probes for detecting proteins, peptides and other biomolecules based on fluorescence quenching and fluorescence resonance energy transfer (FRET).

One-pot green synthesis of carbon dots by using Saccharum officinarum juice for fluorescent imaging of bacteria (Escherichia coli) and yeast (Saccharomyces cerevisiae) cells.

We are reporting highly economical plant-based hydrothermal method for one-pot green synthesis of water-dispersible fluorescent carbon dots (CDs) by using Saccharum officinarum juice as precursor. The synthesized CDs were characterized by UV-visible, fluorescence, Fourier transform infrared (FT-IR), dynamic light scattering (DLS), high-resolution transmission electron microscopic (HR-TEM), and laser scanning confocal microscopic techniques. The CDs are well dispersed in water with an average size of ~3 nm and showed bright blue fluorescence under UV-light (λex=365 nm). These CDs acted as excellent fluorescent probes in cellular imaging of bacteria (Escherichia coli) and yeast (Saccharomyces cerevisiae).