Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Artigo em Inglês | MEDLINE | ID: mdl-22828845

RESUMO

There is a clear clinical need for creating 3-D images of the heart. One promising technique is the use of transesophageal echocardiography (TEE). To enable 3-D TEE, we are developing a miniature ultrasound probe containing a matrix piezoelectric transducer with more than 2000 elements. Because a gastroscopic tube cannot accommodate the cables needed to connect all transducer elements directly to an imaging system, a major challenge is to locally reduce the number of channels, while maintaining a sufficient signal-to-noise ratio. This can be achieved by using front-end receiver electronics bonded to the transducers to provide appropriate signal conditioning in the tip of the probe. This paper presents the design of such electronics, realizing time-gain compensation (TGC) and micro-beamforming using simple, low-power circuits. Prototypes of TGC amplifiers and micro-beamforming cells have been fabricated in 0.35-µm CMOS technology. These prototype chips have been combined on a printed circuit board (PCB) to form an ultrasound-receiver system capable of reading and combining the signals of three transducer elements. Experimental results show that this design is a suitable candidate for 3-D TEE.


Assuntos
Algoritmos , Ecocardiografia Tridimensional/instrumentação , Ecocardiografia Transesofagiana/instrumentação , Eletrônica/instrumentação , Interpretação de Imagem Assistida por Computador/instrumentação , Armazenamento e Recuperação da Informação/métodos , Reconhecimento Automatizado de Padrão/métodos , Processamento de Sinais Assistido por Computador/instrumentação , Transdutores , Desenho de Equipamento , Análise de Falha de Equipamento , Aumento da Imagem/instrumentação , Reprodutibilidade dos Testes , Sensibilidade e Especificidade
2.
Biosens Bioelectron ; 19(12): 1685-93, 2004 Jul 15.
Artigo em Inglês | MEDLINE | ID: mdl-15142603

RESUMO

Hematocrit is the most important determinant of whole blood viscosity and it affects thrombosis. As hematocrit can be measured accurately in vitro by using an electrical impedance technique, aim of the present study is to investigate the diagnostic potential of using this technique in vivo to continuously monitor hematocrit. Characteristics of a special catheter for in vivo measurement of electrical resistivity in blood in the right atrium are described. In five anesthetized swine hematocrit is monitored continuously with this catheter while different levels of hemoconcentration are induced. In addition, blood viscosity is increased by inducing 'acute phase' reaction the day before surgery, resulting in variable degree of elevated fibrinogen levels in the five swine. Good reproducibility of the resistivity measurements (S.D < 0.01) and excellent correlation between resistivity data in vivo and hematocrit levels in each swine are found (r2 = 0.95-0.99). Furthermore, stepwise regression analysis of data from all swine shows a highly significant contribution also of other important parameters of blood viscosity, such as fibrinogen, total protein and temperature (cumulative r2 = 0.97). Determining hematocrit continuously in vivo by electrical resistivity measurements with a catheter in the right atrium is feasible and these measurements correlate significantly also with other important parameters of blood viscosity.


Assuntos
Função do Átrio Direito/fisiologia , Viscosidade Sanguínea/fisiologia , Cateteres de Demora , Impedância Elétrica , Eletroquímica/instrumentação , Hematócrito/instrumentação , Hemorreologia/instrumentação , Animais , Eletroquímica/métodos , Eletrodos , Desenho de Equipamento , Análise de Falha de Equipamento , Estudos de Viabilidade , Feminino , Hematócrito/métodos , Hemorreologia/métodos , Masculino , Sistemas On-Line , Reprodutibilidade dos Testes , Sensibilidade e Especificidade
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...