A 22-year follow-up cross-sectional study on periapical health in relation to the quality of root canal treatment in a Belgian population.

AIM: To investigate the prevalence of apical periodontitis (AP) and the technical standard of root canal treatment in a Belgian population, assess the association of different variables with periapical status, and compare the results to a similar study conducted 22 years previously. METHODOLOGY: In this cross-sectional study, 614 panoramic radiographs of first-time adult attendees at the Dental School of the University Hospital of Ghent were examined. Recorded patient-level parameters included gender, age, number of teeth, number of root filled teeth, presence of any AP lesion, and number of implants. The following tooth-level data were collected: tooth presence, coronal status, quality of coronal restoration, post presence, type of root-filling material, length and density of root filling, root-end filling material, presence of AP, and adjacent implant. Multivariable multilevel binary logistic regression was used to explore the association between patient and tooth characteristics and AP prevalence. Risk differences and confidence intervals were calculated to compare the present with the previous study. RESULTS: The prevalence of AP at patient and tooth level was 46.9% and 5.6%, respectively. Fifty-one per cent of the 614 patients had at least one root filled tooth, and 5.9% of the 14 655 teeth studied were root filled. AP was found in 45% of root filled teeth. Fifty-four per cent of the root-filled teeth were rated as inadequate. Multivariable multilevel logistic regression revealed that more teeth, more implants, fewer root-filled teeth, adequate density, adequate coronal restoration, and no caries reduced the likelihood of AP. There were no statistically significant differences between the two studies regarding the prevalence of root-filled teeth or AP and the technical quality of root canal treatment. CONCLUSIONS: The prevalence of AP and the technical quality of root canal treatment in Belgium have not substantially changed over the last 22 years, despite the technological advancements and continuing education in the field.

Principle and antimicrobial efficacy of laser-activated irrigation: A narrative review.

In the last two decades, the activation of root canal irrigants with pulsed lasers as an adjunct in root canal treatment has become increasingly popular. This narrative review explains the physical basics and the working mechanism of laser-activated irrigation (LAI), explores the parameters influencing LAI efficacy, considers historical evolutions in the field and summarizes laboratory and clinical evidence with emphasis on the antimicrobial action of LAI. Cavitation is the driving force behind LAI, with growing and imploding vapour bubbles around the laser tip causing various secondary phenomena in the irrigant, leading to intense liquid dynamics throughout the underlying root canal. High-speed imaging research has shown that laser wavelength, pulse energy, pulse length and fibre tip geometry are parameters that influence this cavitation process. Nevertheless, this has not resulted in standardized settings for LAI. Consequently, there is significant variability in studies assessing LAI efficacy, complicating the synthesis of results. Laboratory studies in extracted teeth suggest that, with regard to canal disinfection, LAI is superior to conventional irrigation and there is a trend of higher antimicrobial efficacy of LAI compared to ultrasonic activation. Clinical evidence is limited to trials demonstrating similar postoperative pain levels after LAI versus no activation or ultrasonic activation. Clinical evidence concerning the effect of LAI on healing of apical periodontitis as yet is scarce.

Comparative efficacy of materials used in patients undergoing pulpotomy or direct pulp capping in carious teeth: A systematic review and meta-analysis.

OBJECTIVES: Different materials have been used for capping the pulp after exposure during caries removal in permanent teeth. The purpose of this study was to collate and analyze all pertinent evidence from randomized controlled trials (RCTs) on different materials used in patients undergoing pulpotomy or direct pulp capping in carious teeth. MATERIALS AND METHODS: Trials comparing two or more capping agents used for direct pulp capping (DPC) or pulpotomy were considered eligible. An electronic search of four databases and two clinical trial registries was carried out up to February 28, 2021 using a search strategy properly adapted to the PICO framework. Screening, data extraction, and risk of bias (RoB) assessment of primary studies were performed in duplicate and independently. The primary outcome was clinical and radiological success; secondary outcomes included continued root formation, tooth discoloration, and dentin bridge formation. RESULTS: 21 RCTs were included in the study. The RoB assessment indicated a moderate risk among the studies. Due to significant clinical and statistical heterogeneity among the studies, performing network meta-analysis (NMA) was not possible. An ad hoc subgroup analysis revealed strong evidence of a higher success of DPC with Mineral Trioxide Aggregate (MTA) compared to calcium hydroxide (CH) (odds ratio [OR] = 3.10, 95% confidence interval [CI]: 1.66-5.79). MTA performed better than CH in pulp capping (both DPC and pulpotomy) of mature compared to immature teeth (OR = 3.34, 95% CI: 1.81-6.17). The GRADE assessment revealed moderate strength of evidence for DPC and mature teeth, and low to very low strength of evidence for the remaining subgroups. CONCLUSIONS: Considerable clinical and statistical heterogeneity among the trials did not allow NMA. The ad hoc subgroup analysis indicated that the clinical and radiographic success of MTA was higher than that of CH but only in mature teeth and DPC cases where the strength of evidence was moderate. PROSPERO Registration: number CRD42020127239.

Effectiveness of adjunct therapy for the treatment of apical periodontitis: A systematic review and meta-analysis.

BACKGROUND: Adjunct therapy refers to any intracanal procedure going beyond chemomechanical preparation with instruments and traditionally delivered irrigants (excluding interim dressings). It is not clear whether and which of these adjunct therapies have a significant impact on the outcome of root canal treatment [healing of apical periodontitis (AP) and other patient-related outcomes]. OBJECTIVES: This systematic review aimed to analyse available evidence on the effectiveness of adjunct therapy for the treatment of AP in permanent teeth, according to a population, intervention, comparison, outcome, time and study design framework formulated a priori by the European Society of Endodontology. METHODS: Five electronic databases (PubMed, Embase, Scopus, Cochrane and Web of Science) were searched up to October 2021 to identify clinical studies comparing adjunct therapy to no adjunct therapy in adult patients with AP. Animal studies, reviews, studies with less than 10 patients per arm and studies with a follow-up time of less than 1 year, or less than 7 days for postoperative pain, were excluded. The quality of the included studies was appraised by the appropriate tools [Risk of Bias 2 (RoB2) for randomized clinical trials (RCTs) and Newcastle-Ottawa Scale for observational studies]. Meta-analysis was performed using a random-effects model. The certainty of the evidence was assessed using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. RESULTS: Fourteen studies (13 RCTs and one retrospective cohort) fulfilled the inclusion criteria for this review. They evaluated different types of adjunct therapy: antimicrobial photodynamic therapy (aPDT; three studies), diode laser canal irradiation (3), Nd:YAG laser canal irradiation (2), Er;Cr:YSGG laser canal irradiation (1), ozone therapy (2) and ultrasonically activated irrigation (UAI) (4). Radiographical healing was reported in seven studies, but meta-analysis was only possible for UAI (two studies), showing no statistically significant difference in healing after 12 months. Pain after 7 days was reported in seven studies. Meta-analysis on three studies that used aPDT and on two studies using diode laser irradiation showed no significant difference in the prevalence of pain after 7 days between the control and adjunct therapy. According to RoB2 tool, six studies had a high risk of bias, five studies had some concerns, and two studies low risk of bias. The GRADE assessment revealed a very low strength of evidence for diode laser, and low strength of evidence for PDT, ozone and UAI studies. DISCUSSION: The included studies displayed significant heterogeneity in terms of type of adjunct therapy, technical details per adjunct therapy, outcome reporting and several combinations of these, limiting the potential for meta-analysis. CONCLUSIONS: There is insufficient evidence to recommend any adjunctive therapy for the treatment of apical periodontitis. REGISTRATION: Prospero CRD42021261869.

Isthmus morphology influences debridement efficacy of activated irrigation: A laboratory study involving biofilm mimicking hydrogel removal and high-speed imaging.

AIM: Little is known about the influence of isthmus morphology on the debridement efficacy of activated irrigation. The aim of this study was to investigate the influence of isthmus morphology on the debridement efficacy of laser-activated irrigation (LAI), EDDY and needle irrigation (NI), and to explain the methods of isthmus cleaning by LAI and EDDY. METHODOLOGY: Four root canal models (apical diameter: 0.30 mm, taper: 0.06, curvature: 23°, length: 20 mm) were produced by CAD-CAM with different isthmus morphologies: long-wide (4 mm; 0.4 mm), long-narrow (4 mm; 0.15 mm), short-wide (2 mm; 0.4 mm) and short-narrow (2 mm; 0.15 mm). The isthmuses were filled with a hydrogel containing dentine debris. The canals were filled with irrigant and models were assigned to the following irrigation protocols (n = 240): needle irrigation (NI) with a 30G needle, Eddy, and LAI (2940 nm Er:YAG-laser, 15 Hz, 40 mJ, SWEEPS, tip at the canal entrance). Standardized images of the isthmuses were taken before and after irrigation, and the amount of removed hydrogel was determined using image analysis software and compared across groups using Kruskal-Wallis test followed by Dunn's multiple comparison. Visualization of the isthmus during activation was achieved using a high-speed camera. The pattern and speed of the flow in the isthmus as well as transient and stable cavitation were analysed using imaging software. RESULTS: Laser-activated irrigation, EDDY and NI removed more hydrogel in short-wide isthmuses than in narrow isthmuses (p < .001). LAI and EDDY removed more hydrogel than NI in every isthmus configuration (p < .001). EDDY showed eddies and stable cavitation, and LAI showed transient cavitation at each pulse, and pulsed horizontal flow with the highest particle speed in closed short isthmuses. CONCLUSIONS: Isthmus morphology influences debridement in all irrigation groups. Short-wide isthmuses were the easiest to clean while narrow isthmuses were the most challenging to clean. Width seems to be a more critical anatomical parameter than length. LAI and EDDY resulted in the greatest biofilm removal and performed better than NI. EDDY produced eddies and stable cavitation in the isthmus, and LAI showed transient cavitation and pulsed horizontal flow.

Protocols for cleaning the incisor access cavity contaminated with epoxy resin sealer.

This study compared different methods for cleaning the sealer-contaminated access cavity of upper incisors. After standard endodontic access, the canals of 50 extracted maxillary incisors were chemomechanically prepared and obturated with gutta-percha and epoxy resin sealer. Teeth were randomly assigned to one of five different pulp chamber cleaning protocols (n = 10): air/water spray, ethanol-saturated cotton pellet (CP), ethanol-saturated microbrush reaching the root filling (MB), MB + air polishing (PROPHYflex; KaVo), or MB + etching with 37% phosphoric acid. Each tooth was split and the sealer-covered area of the pulp chamber was determined on images taken before and after cleaning using image analysis software. The sealer-covered area was compared across groups using one-way ANOVA. Greatest mean sealer-covered area reduction was observed for MB + etching (98.0%), MB + air polishing (95.2%), and MB alone (92.8%), yielding a significantly higher sealer-covered area reduction than after air/water spray (8.3%) and ethanol-saturated cotton pellet (53.4%). The upper incisor access cavity is best cleaned with an ethanol-saturated microbrush reaching up to the root filling, followed by air/water spraying and etching. The use of cotton pellets should be discouraged.

Explaining the working mechanism of laser-activated irrigation and its action on microbial biofilms: A high-speed imaging study.

AIM: Laser-activated irrigation (LAI) using pulsed erbium lasers has been studied with regard to canal cleaning, but its working mechanism remains poorly understood. This study sought to unravel the method of action of LAI and to assess its effect on bacterial biofilms in a root canal model, by means of high-speed imaging. METHODOLOGY: A root canal model consisting of dentine and glass walls was used. Visualization of the canal space during activation was achieved with a high-speed camera, capturing 20-s activation series at 50 000 frames per second. Recordings were made of canal models filled with water, models filled with water containing glass microspheres, and models with a biofilm (an undefined biofilm originating from oral samples, a 1-week-old Enterococcus faecalis biofilm or a 11-day-old multispecies biofilm) grown on the dentine walls. LAI parameters were 2940 nm, 15 Hz, 50 µs, 20 mJ and 400 µm conical tip held at orifice level. Quantitative (measurement of size, life time and timing of cavitation bubbles; velocity and amplitude of root canal content movement) and qualitative (descriptive) analysis of the intracanal events was performed using imaging software. RESULTS: During the implosion of the primary bubble, smaller cavitation bubbles emerged throughout the entire canal. This process began in the coronal canal part and continued in the apical direction. Expansion of these bubbles was followed by an implosion, and this volumetric change over a time span of a few 100 µs resulted in a very rapid vertical movement of the canal content with a mean amplitude of 900 µm. The succession of these movements with every pulse, resulted in biofilm detachment from the root canal walls and the gradual displacement of fragments coronally, until their complete removal. The pattern of the biofilm removal was the same for all groups. LAI was able to remove biofilm from the root canal models. CONCLUSIONS: The hydrodynamic effect of LAI is based on the generation of small cavitation bubbles throughout the entire canal, far from the primary bubble. Their volumetric oscillation results in a small yet very fast vertical movement of the root canal content and local liquid streaming on each pulse, resulting in biofilm detachment and coronal displacement.

A critical analysis of research methods and experimental models to study intracanal medicaments.

In order to ensure predictable decontamination of the root canal system, chemo-mechanical preparation of the root canal space is sometimes supplemented with the use of intracanal medication. As microbial control of the root canal space is fundamental to the resolution of apical periodontitis, root canal disinfection strategies haven been researched intensively. The use of intracanal medication as a supplementary step to the chemo-mechanical preparation of the root canal space is one of them. Because of the costs and limitations of clinical research it is relevant and common practice to first evaluate alternative or new root canal disinfection modalities in laboratory studies. This involves the simulation of a root canal infection in a laboratory model, on which different disinfection strategies can be tested. When modelling the infected root canal, different levels of infection can be discriminated: suspended bacteria, microbial biofilms and infected dentine. This review describes the experimental models associated with these infection levels and critically appraises their value and methodological details. Suggestions for relevant research methods and experimental models are given, as well as some good practices for laboratory-based microbiological studies.

Model system parameters influence the sodium hypochlorite susceptibility of endodontic biofilms.

AIM: To evaluate in a laboratory setting the influence of several model system parameters on the sodium hypochlorite (NaOCl) susceptibility of endodontic biofilms. Based on these findings, a relevant in vitro endodontic biofilm model is proposed. METHODOLOGY: In vitro biofilms were cultured, varying the following experimental model parameters: biofilm composition (monospecies Enterococcus faecalis and a multispecies biofilm including E. faecalis, Fusobacterium nucleatum, Prevotella intermedia and Porphyromonas gingivalis), incubation time (24 h or 11 days), incubation atmosphere (aerobically or anaerobically) and biofilm substrate (polystyrene microtiter plate wells, hydroxyapatite or dentine). Biofilms were subjected to treatment with NaOCl (0.025%, 0.1%, 0.5%, 2.5%) for 1 min, control groups included treatment with purified water. Biofilms were harvested and the number of surviving cells was determined by plate counting using general (monospecies biofilms) or selective (multispecies biofilms) media. A two-way ANOVA was used to explore the effect of the model parameters on biofilm eradication. Finally, the most physiologically relevant biofilm model (11-day-old multispecies biofilm grown anaerobically on dentine discs) was characterized by selective media plate counting, NaOCl susceptibility testing, scanning and transmission electron microscopy. RESULTS: There was no difference in NaOCl eradication between the anaerobically and aerobically grown E. faecalis biofilms. One-day-old biofilms of E. faecalis were more susceptible to most tested NaOCl concentrations than 11-day-old biofilms (p < .05). When grown in a multispecies biofilm, E. faecalis was significantly less susceptible to NaOCl treatment than in a monospecies biofilm (p < .05). E. faecalis in a multispecies biofilm grown in a MTP was more susceptible to NaOCl (0.025% and 0.1%) than when grown on hydroxyapatite or dentine. No difference in biofilm NaOCl susceptibility was seen between hydroxyapatite and dentine. The multispecies biofilm proved to be a reproducible model with high NaOCl resistance, complex structure and organization. CONCLUSION: The parameters biofilm age, biofilm composition and substrate had a significant influence on the NaOCl susceptibility of E. faecalis biofilms. Older biofilms, multispecies biofilms and biofilms grown on dentine and hydroxyapatite had reduced NaOCl susceptibility. These findings emphasize the importance of selecting relevant parameters when designing a laboratory biofilm model system for the evaluation of antimicrobial treatments.

Efficacy of different irrigation technique in simulated curved root canals.

The aim of this study was to assess the influence of the canal curvature on the efficacy of sonically, ultrasonically, and laser-activated irrigation in removing a biofilm-mimicking hydrogel (BMH) from simulated canal irregularities. Transparent resin blocks containing a curved root canal (40° or 60°) were used as test models. A 4-mm groove at 1 mm from the apex was filled with BMH. Five different irrigation procedures were performed (n=20): needle irrigation (NI), EndoActivator (EA), Eddy, ultrasonically activated irrigation (UAI) (Irrisafe), and laser-activated irrigation (LAI) using a pulsed erbium laser (PIPS approach). All protocols were executed for 3×20s. Images of the groove were taken before and after irrigation, and the percentage BMH removal was calculated using image analysis software. In the 40° canal curvature model, the highest BMH removal was observed for UAI (99.9%), yielding a significantly better removal than that of EA (57.2%) and NI (53.8%), but not of LAI (96.8%) and Eddy (99.4%). In the 60° canal curvature model, UAI removed 99.5%, which resulted in significantly greater hydrogel removal than all other groups (P < 0.05). The difference between LAI (82.5%) and Eddy (78.1%) was not statistically significant, but both were more effective than EA (13.5%) and NI (7.3%). Canal curvature negatively affects the cleaning efficacy of different irrigation methods. The effect was most pronounced for the sonic techniques, while this was not the case for UAI. This could be ascribed to the prebent ultrasonic tip. Despite the position of the laser tip at the orifice level, fluid streaming during LAI resulted in substantial BMH removal beyond the curve.

Adjunctive Steps for the Removal of Hard Tissue Debris from the Anatomic Complexities of the Mesial Root Canal System of Mandibular Molars: A Micro-Computed Tomographic Study.

INTRODUCTION: This in vitro study sought to compare the efficacy of a sonic irrigant activation device with ultrasonic activation and needle irrigation in removing hard tissue debris (HTD) from anatomic complexities of the root canal system. METHODS: Twenty-seven mesial roots of extracted human mandibular molars with 2 canals connected by an isthmus were selected based on micro-computed tomography scans (12-µm voxel size). The mesial canals were mechanically prepared to ProTaper Next X3 (Dentsply Maillefer, Ballaigues, Switzerland) and anatomically distributed into 3 groups (n = 9) according to the final irrigation protocol: sonically activated irrigation (SAI) using the EDDY system (VDW GbmH, Munich, Germany) for 3 × 20 seconds, ultrasonically activated irrigation (UAI) using a size 20 Irrisafe tip (Satelec Acteon, Mérignac, France) for 3 × 20 seconds, and conventional irrigation using a 30-G needle adapted to a syringe. Micro-computed tomographic scans were taken after instrumentation and after supplementary activation of the irrigant. After reconstruction and coregistration, the volume filled with HTD before and after irrigant activation was calculated, and the mean percentage of HTD reduction after final irrigation was compared within and among groups using the paired sample t test and 1-way analysis of variance post hoc Tukey test, respectively (α = 5%). RESULTS: A significant reduction in the volume filled with HTD after irrigant activation was observed in all groups (P < .05). The percentage reduction of HTD in the UAI group (66.8%) was significantly higher than that in the SAI group (36.4%) (P < .05), whereas the conventional irrigation group result (43.7%) did not differ statistically from the UAI or SAI groups (P > .05). CONCLUSIONS: All tested supplementary irrigation steps significantly reduced the amount of debris created during root canal preparation. Ultrasonic activation resulted in the highest mean debris reduction.

The efficacy of different cleaning protocols for the sealer-contaminated access cavity.

OBJECTIVES: Sealer remnants in the access cavity may negatively affect coronal seal and cause tooth discoloration. This study sought to evaluate the efficacy of different cleaning protocols for the sealer-contaminated access cavity. MATERIALS AND METHODS: Sixty extracted human molars were accessed, chemomechanically prepared and warm vertically obturated with gutta-percha and epoxy resin sealer. Teeth were randomly assigned to one control (air/water spray) and five test groups (n = 10): scrubbing with an ethanol-saturated cotton pellet (CP), scrubbing with an ethanol-saturated microbrush (MB), air polishing (ProphyFlex, KaVo), MB + air polishing and cleaning with a round bur. Each tooth was split sagittally, and the sealer-covered access cavity area (SCA) before and after cleaning was determined using image analysis software and compared pre- and post-operatively and across groups using paired samples t test and one-way ANOVA. RESULTS: The SCA was significantly reduced in all test groups (P < 0.05), but not in the control group (P > 0.05). Highest epoxy resin sealer reductions were observed for MB (92%) and MB + air polishing (94%), yielding a significantly better SCA reduction than that of ethanol-saturated cotton pellet (58%), bur cleaning (69%) or air polishing alone (64%). CONCLUSIONS: All cleaning protocols except air/water spray reduced the amount of epoxy resin sealer in the access cavity, but none of them completely removed the sealer. Cleaning with the ethanol-saturated microbrush, with or without air polishing, performed better than the other methods. CLINICAL RELEVANCE: Scrubbing with an ethanol-saturated microbrush, with or without air polishing, was the most efficient method for cleaning the epoxy resin sealer-contaminated molar access cavity.

Accurate prediction of glaucoma from colour fundus images with a convolutional neural network that relies on active and transfer learning.

PURPOSE: To assess the use of deep learning (DL) for computer-assisted glaucoma identification, and the impact of training using images selected by an active learning strategy, which minimizes labelling cost. Additionally, this study focuses on the explainability of the glaucoma classifier. METHODS: This original investigation pooled 8433 retrospectively collected and anonymized colour optic disc-centred fundus images, in order to develop a deep learning-based classifier for glaucoma diagnosis. The labels of the various deep learning models were compared with the clinical assessment by glaucoma experts. Data were analysed between March and October 2018. Sensitivity, specificity, area under the receiver operating characteristic curve (AUC), and amount of data used for discriminating between glaucomatous and non-glaucomatous fundus images, on both image and patient level. RESULTS: Trained using 2072 colour fundus images, representing 42% of the original training data, the trained DL model achieved an AUC of 0.995, sensitivity and specificity of, respectively, 98.0% (CI 95.5%-99.4%) and 91% (CI 84.0%-96.0%), for glaucoma versus non-glaucoma patient referral. CONCLUSIONS: These results demonstrate the benefits of deep learning for automated glaucoma detection based on optic disc-centred fundus images. The combined use of transfer and active learning in the medical community can optimize performance of DL models, while minimizing the labelling cost of domain-specific mavens. Glaucoma experts are able to make use of heat maps generated by the deep learning classifier to assess its decision, which seems to be related to inferior and superior neuroretinal rim (within ONH), and RNFL in superotemporal and inferotemporal zones (outside ONH).

The efficacy of ultrasonic and PIPS (photon-induced acoustic streaming) irrigation to remove artificially placed dentine debris plugs out of an artificial and natural root model.

The aim was to validate an artificial resin 'root canal wall groove model' (RCWGM) mimicking the situation of natural roots with a groove of identical dimensions on debris removal out of these grooves, and to evaluate Erbium 'laser-activated irrigation' (LAI) with two conical tips at PIPS (photon-induced photoacoustic streaming) settings, with different activation times and different root canal positions on debris removal out of the grooves. A split RCWGM was used (resin blocks and roots of maxillary canines) with a canal size 40/0.06. The grooves in the apical third were filled with stained dentinal debris. Seventeen irrigation protocols (n = 20) were used: syringe-needle irrigation (3× 20 s), manual dynamic activation (1× 60 s), ultrasonically activated irrigation (UAI) with 25/25 Irrisafe (3× 20 s) and LAI (2940 nm Er:YAG) with X-Pulse or PIPS tips at PIPS settings (20 mJ, 50 µs, 20 Hz) and with the fibre (IN) or (OUT) the canal: IN during 1× 20 s, and OUT during 1× 20 s, 2× 20 s, 3× 20 s, 30 s, 2× 30 s and 1× 60 s. The quantity of remaining dentine debris in the groove was evaluated on a numerical scale. Statistical analysis was performed by means of proportional odds logistic regression, equivalence testing and Wald tests. The level of significance was set at 0.05. Resin models and the RCWGM with natural teeth can be called equivalent (log odds ratio 0.185). There were mostly no statistically significant differences for debris removal between UAI and LAI (p > 0.05) and between LAI with PIPS and X-Pulse (p > 0.05). Although not statistically different, the numbers of completely cleaned grooves were higher with LAI than with UAI for a 1-min activation, confirming findings from other studies. There is no difference in cleaning efficacy between X-Pulse and PIPS tips at PIPS settings.

Debris Removal from the Mesial Root Canal System of Mandibular Molars with Laser-activated Irrigation.

INTRODUCTION: The purpose of this study was to compare in vitro the canal and isthmus debridement of manual-dynamic, passive ultrasonic, and laser-activated irrigation with an Er:YAG laser in mesial roots of human mandibular molars. METHODS: Fifty extracted mandibular molars with an isthmus were embedded in resin and sectioned axially 4 mm from the apex. The teeth were reassembled with guide pins and bolts, and the mesial canals were instrumented up to a ProTaper F2 rotary file (Dentsply Maillefer, Ballaigues, Switzerland). Teeth were randomly assigned to the following irrigant activation groups (n = 10): conventional needle irrigation (NI), manual-dynamic irrigation with a ProTaper F2 gutta-percha cone, ultrasonically activated irrigation using a size 20 Irrisafe (Satelec Acteon, Mérignac, France), and laser-activated irrigation (LAI) with an Er:YAG laser and a conical 400-µm fiber tip in the canal entrance or a 600-µm tip over the canal entrance. Root cross-sectional images were taken before and after final irrigation, and the area occupied by debris in the main canal and the isthmus was determined using image analysis software. Differences in debris before and after activation were statistically compared within and across groups. RESULTS: Significant reductions in debris levels were observed in all groups, except for NI and manual-dynamic irrigation (canal only). None of the methods rendered the canal systems debris free. In the canal, LAI with an Er:YAG laser and a 600-µm tip over the canal entrance removed significantly more debris than NI. In the isthmus, LAI with an Er:YAG laser and a conical 400-µm fiber tip in the canal entrance removed significantly more debris than NI. CONCLUSIONS: Within the limitations of this in vitro study, canal and isthmus cleanliness significantly improved after irrigant activation.

Influence of lasing parameters on the cleaning efficacy of laser-activated irrigation with pulsed erbium lasers.

Laser-activated irrigation (LAI) using erbium lasers is an irrigant agitation technique with great potential for improved cleaning of the root canal system, as shown in many in vitro studies. However, lasing parameters for LAI vary considerably and their influence remains unclear. Therefore, this study sought to investigate the influence of pulse energy, pulse frequency, pulse length, irradiation time and fibre tip shape, position and diameter on the cleaning efficacy of LAI. Transparent resin blocks containing standardized root canals (apical diameter of 0.4 mm, 6% taper, 15 mm long, with a coronal reservoir) were used as the test model. A standardized groove in the apical part of each canal wall was packed with stained dentin debris. The canals were filled with irrigant, which was activated by an erbium: yttrium aluminium garnet (Er:YAG) laser (2940 nm, AT Fidelis, Fotona, Ljubljana, Slovenia). In each experiment, one laser parameter was varied, while the others remained constant. In this way, the influence of pulse energy (10-40 mJ), pulse length (50-1000 µs), frequency (5-30 Hz), irradiation time (5-40 s) and fibre tip shape (flat or conical), position (pulp chamber, canal entrance, next to groove) and diameter (300-600 µm) was determined by treating 20 canals per parameter. The amount of debris remaining in the groove after each LAI procedure was scored and compared among the different treatments. The parameters significantly (P < 0.05, Kruskal-Wallis) affecting debris removal from the groove were fibre tip position, pulse length, pulse energy, irradiation time and frequency. Fibre tip shape and diameter had no significant influence on the cleaning efficacy.

Insight in the chemistry of laser-activated dental bleaching.

The use of optical radiation for the activation of bleaching products has not yet been completely elucidated. Laser light is suggested to enhance the oxidizing effect of hydrogen peroxide. Different methods of enhancing hydrogen peroxide based bleaching are possible. They can be classified into six groups: alkaline pH environment, thermal enhancement and photothermal effect, photooxidation effect and direct photobleaching, photolysis effect and photodissociation, Fenton reaction and photocatalysis, and photodynamic effect.

Laser teeth bleaching: evaluation of eventual side effects on enamel and the pulp and the efficiency in vitro and in vivo.

Light and heat increase the reactivity of hydrogen peroxide. There is no evidence that light activation (power bleaching with high-intensity light) results in a more effective bleaching with a longer lasting effect with high concentrated hydrogen peroxide bleaching gels. Laser light differs from conventional light as it requires a laser-target interaction. The interaction takes place in the first instance in the bleaching gel. The second interaction has to be induced in the tooth, more specifically in the dentine. There is evidence that interaction exists with the bleaching gel: photothermal, photocatalytical, and photochemical interactions are described. The reactivity of the gel is increased by adding photocatalyst of photosensitizers. Direct and effective photobleaching, that is, a direct interaction with the colour molecules in the dentine, however, is only possible with the argon (488 and 415 nm) and KTP laser (532 nm). A number of risks have been described such as heat generation. Nd:YAG and especially high power diode lasers present a risk with intrapulpal temperature elevation up to 22°C. Hypersensitivity is regularly encountered, being it of temporary occurrence except for a number of diode wavelengths and the Nd:YAG. The tooth surface remains intact after laser bleaching. At present, KTP laser is the most efficient dental bleaching wavelength.

Efficacy of laser-based irrigant activation methods in removing debris from simulated root canal irregularities.

In root canal therapy, irrigating solutions are essential to assist in debridement and disinfection, but their spread and action is often restricted by canal anatomy. Hence, activation of irrigants is suggested to improve their distribution in the canal system, increasing irrigation effectiveness. Activation can be done with lasers, termed laser-activated irrigation (LAI). The purpose of this in vitro study was to compare the efficacy of different irrigant activation methods in removing debris from simulated root canal irregularities. Twenty-five straight human canine roots were embedded in resin, split, and their canals prepared to a standardized shape. A groove was cut in the wall of each canal and filled with dentin debris. Canals were filled with sodium hypochlorite and six irrigant activation procedures were tested: conventional needle irrigation (CI), manual-dynamic irrigation with a tapered gutta percha cone (manual-dynamic irrigation (MDI)), passive ultrasonic irrigation, LAI with 2,940-nm erbium-doped yttrium aluminum garnet (Er:YAG) laser with a plain fiber tip inside the canal (Er-flat), LAI with Er:YAG laser with a conical tip held at the canal entrance (Er-PIPS), and LAI with a 980-nm diode laser moving the fiber inside the canal (diode). The amount of remaining debris in the groove was scored and compared among the groups using non-parametric tests. Conventional irrigation removed significantly less debris than all other groups. The Er:YAG with plain fiber tip was more efficient than MDI, CI, diode, and Er:YAG laser with PIPS tip in removing debris from simulated root canal irregularities.

Investigation of Coronal Leakage of Root Fillings after Smear Layer Removal with EDTA or Er,Cr:YSGG Laser through Capillary Flow Porometry.

No studies have been performed evaluating the marginal seal of root fillings after direct exposure of root canal (RC) walls to Er,Cr:YSGG laser irradiation. Therefore, 75 root filled teeth (5 × 15-cold lateral condensation) were analyzed for through-and-through leakage (TTL) using capillary flow porometry (CFP). The cleaning protocol determined the experimental groups: (1) irrigation with NaOCl 2.5% and EDTA 17% or standard protocol (SP), (2) SP + Er,Cr:YSGG lasing (dried RC), (3) NaOCl 2.5% + Er,Cr:YSGG lasing (dried RC), (4) SP + Er,Cr:YSGG lasing (wet RC), and (5) NaOCl 2.5% + Er,Cr:YSGG lasing (wet RC). Groups 6 to 10 consisted of the same filled teeth with resected apices. Resection was performed after the first CFP measurement. CFP was used to assess minimum, mean flow, and maximum pore diameters after 48 h. Statistics were performed using nonparametric tests (P > 0.05). Additional three roots per group were submitted to SEM of the RC walls. TTL was observed in all groups without statistically significant differences between the different groups for minimum, mean, and maximum pore diameter (P > 0.05). In this study, the use of EDTA and/or Er,Cr:YSGG laser did not reduce through-and-through leakage in nonresected and resected roots.