RESUMO
For the first time, large-area, flexible organic-inorganic tin perovskite solar modules are fabricated by means of an industry-compatible and scalable blade-coating technique. An 8-cell interconnected mini module with dimensions of 25 cm2 (active area = 8 × 1.5 cm2) reached 5.7% power conversion efficiency under 1000 W/m2 (AM 1.5G) and 9.4% under 2000 lx (white-LED).
RESUMO
In quantum dot sensitized solar cells (QDSSC), a cascade energy level structure controlled by assembly of cadmium-chalcogenide quantum dots can remarkably improve the sunlight harvesting and charge carrier lifetime. Despite the advantages of using co-sensitizers, energy conversion efficiencies are still low. An increased understanding of the causes of the low photoconversion efficiency (PCE) will contribute to the development of a straightforward approach to improve solar cell performance by exploiting co-sensitization. Herein we discuss how an excess of cadmium causes structural disorder and defect levels impacting the PCE of QDSSC devices. Thus, outer CdS1-xSex/inner CdS QD-co-sensitized B,N,F-co-doped-TiO2 nanotubes (BNF-TNT) were prepared. Chalcogenides were deposited by the SILAR method on BNF-TNT, varying the load of CdS as the inner sensitizer, while for CdS1-xSex, five SILAR cycles were used (5-CdS1-xSex), controlling the nominal S/Se molar ratio of the ternary alloy. Cd defects named as Cd-Cd energy levels were observed during CdS sensitization. Although incorporation of outer CdS1-xSex provides a tunable band gap to achieve good band alignment for carrier separation, Cd-Cd energy levels in the sensitizers act as recombination centers, limiting the overall electron flow at the BNF-TNT/CdS/CdS1-xSex interface. A maximum PCE of 2.58% was reached under standard AM 1.5G solar illumination at 100 mW cm-2. Additional limitations of SILAR as a deposition strategy of QDs are also found to influence the PCE of QDSSC.
RESUMO
Effective control of the interface between the metal cathode and the electron transport layer (ETL) is critical for achieving high performance p-i-n planar heterojunction perovskite solar cells (PSCs). Several organic molecules have been explored as interlayers between the silver (Ag) electrode and the ETL for the improvement in the photovoltaic conversion efficiency (PCE) of p-i-n planar PSCs. However, the role of these organic molecules in the charge transfer at the metal/ETL interface and the chemical degradation processes of PSCs has not yet been fully understood. In this work, we systematically explore the effects of the interfacial modification of the Ag/ETL interface on PSCs using rhodamine 101 as a model molecule. By the insertion of rhodamine 101 as an interlayer between Ag and fullerene derivatives (PC60BM and PC70BM) ETLs improve the PCE as well as the stability of p-i-n planar PSCs. Atomic force microscopy (AFM) characterization reveals that rhodamine passivates the defects at the PCBM layer and reduces the band bending at the PCBM surface. In consequence, charge transfer from the PCBM towards the Ag electrode is enhanced leading to an increased fill factor (FF) resulting in a PCE up to 16.6%. Moreover, rhodamine acts as a permeation barrier hindering the penetration of moisture towards the perovskite layer as well as preventing the chemical interaction of perovskite with the Ag electrode. Interestingly, the work function of the metal cathode remains more stable due to the rhodamine incorporation. Consequently, a better alignment between the quasi-Fermi level of PCBM and the Ag work function is achieved minimizing the energy barrier for charge extraction. This work contributes to reveal the relevance of proper interfacial engineering at the metal-cathode/organic-semiconductor interface.
RESUMO
Fabrication of solution-processed perovskite solar cells (PSCs) requires the deposition of high quality films from precursor inks. Frequently, buffer layers of PSCs are formed from dispersions of metal oxide nanoparticles (NPs). Therefore, the development of trustable methods for the preparation of stable colloidal NPs dispersions is crucial. In this work, a novel approach to form very compact semiconducting buffer layers with suitable optoelectronic properties is presented through a self-functionalization process of the nanocrystalline particles by their own amorphous phase and without adding any other inorganic or organic functionalization component or surfactant. Such interconnecting amorphous phase composed by residual nitrate, hydroxide, and sodium ions, proved to be fundamental to reach stable colloidal dispersions and contribute to assemble the separate crystalline nickel oxide NPs in the final film, resulting in a very homogeneous and compact layer. A proposed mechanism behind the great stabilization of the nanoparticles is exposed. At the end, the self-functionalized nickel oxide layer exhibited high optoelectronic properties enabling perovskite p-i-n solar cells as efficient as 16.6% demonstrating the pertinence of the presented strategy to obtain high quality buffer layers processed in solution at room temperature.
RESUMO
Since the first reports of efficient organic-inorganic perovskite solar cells in 2012, an explosion of research activity has emerged around the world, which has led to a rise in the power conversion efficiencies (PCEs) to over 20%. Despite the impressive efficiency, a key area of the device which remains suboptimal is the electron extraction layer and its interface with the photoactive perovskite. Here, we implement an electron collection "bilayer" composed of a thin layer of zirconia coated with titania, sitting upon the transparent conductive oxide fluorine-doped tin oxide (FTO). With this double collection layer we have reached up to 17.9% power conversion efficiency, delivering a stabilized power output (SPO) of 17.0%, measured under simulated AM 1.5 sunlight of 100 mW cm-2 irradiance. Finally, we propose a mechanism of the charge transfer processes within the fabricated architectures in order to explain the obtained performance of the devices.
