Solar Gas-Phase CO2 Hydrogenation by Multifunctional UiO-66 Photocatalysts.

Solar-assisted CO2 conversion into fuels and chemical products involves a range of technologies aimed at driving industrial decarbonization methods. In this work, we report on the development of a series of multifunctional metal-organic frameworks (MOFs) based on nitro- or amino-functionalized UiO-66(M) (M: Zr or Zr/Ti) supported RuOx NPs as photocatalysts, having different energy band level diagrams, for CO2 hydrogenation under simulated concentrated sunlight irradiation. RuOx(1 wt %; 2.2 ± 0.9 nm)@UiO-66(Zr/Ti)-NO2 was found to be a reusable photocatalyst, to be selective for CO2 methanation (5.03 mmol g-1 after 22 h;, apparent quantum yield at 350, 400, and 600 nm of 1.67, 0.25, and 0.01%, respectively), and to show about 3-6 times activity compared with previous investigations. The photocatalysts were characterized by advanced spectroscopic techniques like femto- and nanosecond transient absorption, spin electron resonance, and photoluminescence spectroscopies together with (photo)electrochemical measurements. The photocatalytic CO2 methanation mechanism was assessed by operando FTIR spectroscopy. The results indicate that the most active photocatalyst operates under a dual photochemical and photothermal mechanism. This investigation shows the potential of multifunctional MOFs as photocatalysts for solar-driven CO2 recycling.

Green, HF-Free Synthesis of MXene Quantum Dots and their Photocatalytic Activity for Hydrogen Evolution.

A general methodology to prepare MXene quantum dots (MxQDs) with yields over 20% by liquid-phase laser ablation of the MAX phase is reported. Mechanical and thermal shock by 532 nm laser pulses (7 ns fwhp, 50 mJ × pulse-1 , 1 Hz pulse frequency) produces MAX etching and exfoliation to form MXene QDs, avoiding the use of HF. The process can be followed by absorption and emission spectroscopy and by dynamic laser scattering and it appears to be general, being applied to Ti3 AlC2 , Ti2 AlC, Nb2 AlC, and V2 AlC MAX phases. Density functional theory calculations indicate that, depending on the surface terminal groups, the diminution of the MXene size to the nanometric scale makes it possible to control the band gap of the MXene. The photocatalytic activity of these MXene QDs for hydrogen evolution has been observed, reaching an H2 production for the most efficient Ti3 C2 QDs as high as 2.02 mmol × g-1 × h-1 .

Metal Nodes of Metal-Organic Frameworks can Activate Molecular Hydrogen.

Hydrogenation of multiple bonds are among the most general and important organic reactions. Typical heterogeneous catalysts are based on transition metal nanoparticles, including noble metals. Data are presented here showing that metal nodes of MIL-101(Cr) and UiO-66 in the absence of occluded metal nanoparticles can promote hydrogenation of polarized X=Y double bonds of nitro and carbonyl groups. The catalytic activity is a function of the composition of the metal node and the organic linker. It is proposed that the reaction mechanism is based on the operation of frustrated Lewis acid/base pairs.

Photocatalytic Water Splitting Promoted by 2D and 3D Porphyrin Covalent Organic Polymers Synthesized by Suzuki-Miyaura Carbon-Carbon Coupling.

This work deals with the synthesis of metal-free and porphyrin-based covalent organic polymers (COPs) by the Suzuki-Miyaura coupling carbon-carbon bond forming reaction to study the photocatalytic overall water splitting performance. Apart from using 5,10,15,20-Tetrakis-(4-bromophenyl)porphyrin, we have chosen different cross-linker monomers to induce 2-dimensional (2D) or 3-dimensional (3D) and different rigidity in their resulting polymeric molecular structure. The synthesised COPs were extensively characterised to reveal that the dimensionality and flexibility of the molecular structure play an intense role in the physical, photochemical, and electronic properties of the polymers. Photoinduced excited state of the COPs was evaluated by nanosecond time-resolved laser transient absorption spectroscopy (TAS) by analysing excited state kinetics and quenching experiments, photocurrent density measurements and photocatalytic deposition of Ru3+ to RuO2, and photocatalysis. In summary, TAS experiments demonstrated that the transient excited state of these polymers has two decay kinetics and exhibit strong interaction with water molecules. Moreover, photocurrent and photocatalytic deposition experiments proved that charges are photoinduced and are found across the COP molecular network, but more important charges can migrate from the surface of the COP to the medium. Among the various COPs tested, COP-3 that has a flexible and 3D molecular structure reached the best photocatalytic performances, achieving a photocatalytic yield of 0.4 mmol H2 × gCOP-3-1 after 3 h irradiation.

Quasi-HKUST Prepared via Postsynthetic Defect Engineering for Highly Improved Catalytic Conversion of 4-Nitrophenol.

HKUST-1 [Cu3(BTC)2(H2O)3]n·nH2OMeOH was submitted to thermolysis under controlled conditions at temperatures between 100 and 300 °C. This treatment resulted in partial ligand decarboxylation, generating coordinatively unsaturated Cu2+ sites with extra porosity on the way to the transformation of the initial HKUST-1 framework to CuO. The obtained materials retaining in part the HKUST-1 original crystal structure (quasi-MOFs) were used to promote 4-nitrophenol conversion to 4-aminophenol. Because of the partial linker decomposition, the quasi-MOF treated at 240 °C contains coordinatively unsaturated Cu2+ ions distributed throughout the Q-HKUST lattice together with micro- and mesopores. These defects explain the excellent catalytic performance of QH-240 with an apparent rate constant of 1.02 × 10-2 s-1 in excess of NaBH4 and an activity factor and half-life time of 51 s-1g-1 and 68 s, respectively, which is much better than that of the HKUST parent. Also, the induction period decreases from the order of minutes to seconds in the presence of the HKUST and QH-240 catalysts, respectively. Kinetic studies fit with the Langmuir-Hinshelwood theory in which both 4-nitrophenol and BH4- should be adsorbed onto the catalyst surface. The values of the true rate constant (k), the adsorption constants of 4-nitrophenol and BH4- (K4-NP and KBH4-), as well as the activation energy are in agreement with a rate-determining step involving the reduction of 4-nitrophenol by the surface-bound hydrogen species.

Improved catalytic hydrogen release of quasi HKUST-1 compared to HKUST-1.

On-demand hydrogen release could be an important process for the transportation of fuel in the near future. Herein it is reported that the controlled thermolysis of HKUST-1 under optimal conditions generates structural defects resulting in a quasi-HKUST-1 material showing a 20-fold enhancement of the H2 release turnover frequency at room temperature in the absence of a base.

Enhanced Catalytic Performance of Quasi-HKUST-1 for the Tandem Imine Formation.

Copper-based metal-organic framework (Cu3 (BTC)2 (H2 O)3 ]n ⋅nH2 OMeOH (HKUST-1) has been subjected to thermolysis under air atmosphere at different temperatures ranging from 100 to 300 °C. This treatment produces the partial removal of ligands, the generation of structural defects and additional porosity in a controlled way. The resulting defective materials denoted according to the literature as quasi-MOFs, were subsequently employed as heterogeneous catalysts in the one pot synthesis of N-benzylideneaniline from aniline and benzyl alcohol in open air as terminal oxidant at 70 °C under base- and dehydrating agent-free conditions. The Q-HKUST catalysts calcined at 240 °C (QH-240) was the most efficient in the series, promoting imine synthesis. Data from Knoevenagel condensation of malononitrile shows that in QH-240 the distances of Cu ions in HKUST-1 cavities are preserved, increasing the Knoevenagel activity, but a strong rearrangement takes place at 300 °C or above. The unsaturated copper active sites with simultaneous presence of micro- and mesopores in QH-240 are responsible for this excellent catalytic performance. The effective parameters on catalytic activity of QH-240 including deligandation temperature, the amount of catalyst, the ratio of reactants, and reaction temperature as well as the stability and recyclability of the catalyst were also investigated. The possible mechanism used by QH-240 follows alcohol aerobic oxidation and subsequent anaerobic condensation of aldehyde intermediate with aniline.

Photoactive Zr and Ti Metal-Organic-Frameworks for Solid-State Solar Cells.

Solid-state photovoltaic cells based on robust metal-organic frameworks (MOFs), MIL-125(Ti), MIL-125(Ti)-NH2 , UiO-67, Ru(bpy)2 -UiO-67, (bpy 2,2'-bipyridine) as active components and spiro-MeOTAD (MeOTAD 2,2',7,7'-tetrakis[N,N-di(p-methoxyphenyl)amino]-9,9'-spirobifluorene) as hole transporting layer have been prepared., The photovoltaic response of this material increases in the presence of bathochromic -NH2 groups on the linker or Ru (II) polypyridyl complexes light harvester. These results show that the strategies typically employed in photocatalysis to enhance the photocatalytic activity of MOFs can also be applied in the field of photovoltaic devices.

Bifunctional metal-organic frameworks for the hydrogenation of nitrophenol using methanol as the hydrogen source.

This work reports the reduction of 4-nitrophenol to 4-aminophenol using UiO-66(Zr) as a bifunctional photocatalyst and hydrogenation catalyst using methanol as the hydrogen source. In particular, a series of UiO-66(Zr)-X (X: NH2, NO2 and H) and MIL-125(Ti)-NH2 catalysts have been screened as bifunctional catalysts for this process. UiO-66(Zr)-NH2 was found to be the most active material to promote light-assisted nitro hydrogenation under both UV-Vis and simulated sunlight irradiation. The tandem reaction occurs via hydrogen generation from a water/methanol mixture in the first step and, then, reduction of 4-nitrophenol to 4-aminophenol. UiO-66(Zr)-NH2 acts as a truly heterogeneous catalyst and can be reused several times without significant loss of activity, maintaining its crystallinity. This work shows the possibility of using MOFs as solar-driven bifunctional catalysts to promote the hydrogenation of organic compounds using methanol as the hydrogen source.