Effect of Metal d Band Position on Anion Redox in Alkali-Rich Sulfides.

New energy storage methods are emerging to increase the energy density of state-of-the-art battery systems beyond conventional intercalation electrode materials. For instance, employing anion redox can yield higher capacities compared with transition metal redox alone. Anion redox in sulfides has been recognized since the early days of rechargeable battery research. Here, we study the effect of d-p overlap in controlling anion redox by shifting the metal d band position relative to the S p band. We aim to determine the effect of shifting the d band position on the electronic structure and, ultimately, on charge compensation. Two isostructural sulfides LiNaFeS2 and LiNaCoS2 are directly compared to the hypothesis that the Co material should yield more covalent metal-anion bonds. LiNaCoS2 exhibits a multielectron capacity of ≥1.7 electrons per formula unit, but despite the lowered Co d band, the voltage of anion redox is close to that of LiNaFeS2. Interestingly, the material suffers from rapid capacity fade. Through a combination of solid-state nuclear magnetic resonance spectroscopy, Co and S X-ray absorption spectroscopy, X-ray diffraction, and partial density of states calculations, we demonstrate that oxidation of S nonbonding p states to S2 2- occurs in early states of charge, which leads to an irreversible phase transition. We conclude that the lower energy of Co d bands increases their overlap with S p bands while maintaining S nonbonding p states at the same higher energy level, thus causing no alteration in the oxidation potential. Further, the higher crystal field stabilization energy for octahedral coordination over tetrahedral coordination is proposed to cause the irreversible phase transition in LiNaCoS2.

Reducing Voltage Hysteresis in Li-Rich Sulfide Cathodes by Incorporation of Mn.

Conventional intercalation-based cathode materials in Li-ion batteries are based on charge compensation of the redox-active cation and can only intercalate one mole of electron per formula unit. Anion redox, which employs the anion sublattice to compensate charge, is a promising way to achieve multielectron cathode materials. Most anion redox materials still face the problems of slow kinetics and large voltage hysteresis. One potential solution to reduce voltage hysteresis is to increase the covalency of the metal-ligand bonds. By substituting Mn into the electrochemically inert Li1.33Ti0.67S2 (Li2TiS3), anion redox can be activated in the Li1.33-2y/3Ti0.67-y/3Mn y S2 (y = 0-0.5) series. Not only do we observe substantial anion redox, but the voltage hysteresis is significantly reduced, and the rate capability is dramatically enhanced. The y = 0.3 phase exhibits excellent rate and cycling performance, maintaining 90% of the C/10 capacity at 1C, which indicates fast kinetics for anion redox. X-ray absorption spectroscopy (XAS) shows that both the cation and anion redox processes contribute to the charge compensation. We attribute the drop in hysteresis and increase in rate performance to the increased covalency between the metal and the anion. Electrochemical signatures suggest the anion redox mechanism resembles holes on the anion, but the S K-edge XAS data confirm persulfide formation. The mechanism of anion redox shows that forming persulfides can be a low hysteresis, high rate capability mechanism enabled by the appropriate metal-ligand covalency. This work provides insights into how to design cathode materials with anion redox to achieve fast kinetics and low voltage hysteresis.

Structural Diversity in 2-(2-Aminoethyl)pyridine-Based Lead Iodide Hybrids.

While 2D metal-organic hybrids have emerged as promising solar absorbers due to their improved moisture stability, their inferior transport properties limit their potential translation into devices. We report a new hybrid containing 2-(2-ammonioethyl)pyridine [(2-AEP)+], forming a 2D hybrid with the composition (2-AEP)2PbI4. The organic bilayer comprises of (2-AEP)+, which is arranged in a face-to-face stacking that promotes π-π interactions between neighboring pyridyl rings. We also demonstrate the structural diversity of 2-(2-aminoethyl)pyridine-based lead iodide hybrids in solution-processed films. This report highlights the importance of solution-processing conditions in trying to obtain single-phase films of hybrids containing dibasic organic species.

Temperature dependence of radiative and non-radiative decay in the luminescence of one-dimensional pyridinium lead halide hybrids.

The photoluminescence properties of organic-inorganic pyridinium lead bromide [(pyH)PbBr3] and iodide [(pyH)PbI3] compounds were investigated as a function of temperature. The inorganic substructure consists of face-sharing chains of PbX6 octahedra. Diffuse reflectance spectra of the compounds show low energy absorption features consistent with charge transfer transitions from the PbX3 chains to the pyridinium cations. Both compounds display extremely weak luminescence at room temperature that becomes strongly enhanced upon cooling to 77 K. Broad, featureless low energy emission (λem > 600 nm) in both compounds have large Stokes shifts [1.1 eV for (pyH)PbBr3 and 0.46 eV for (pyH)PbI3] and are assigned to transitions from self-trapped excitons on the inorganic chains whereas emission at higher energy in (pyH)PbBr3 (λem = 450 nm) is assigned to luminescence from a free exciton state. Analysis of data from temperature-dependent luminescence intensity measurements gives activation energies (Ea) for non-radiative decay of the self-trapped excitons in (pyH)PbBr3 and (pyH)PbI3, (Ea = 0.077 eV and 0.103 eV, respectively) and for the free exciton in (pyH)PbBr3 (Ea = 0.010 eV). Analysis of temperature dependent luminescence lifetime data indicates another non-radiative decay process in (pyH)PbI3 at higher temperatures (Ea = 0.17 eV). A large increase in the luminescence lifetime of (pyH)PbI3 below 80 K is consistent with thermalization between triplet sublevels. Analysis of the luminescence power dependence for (pyH)PbI3 shows superlinear response suggestive of quenching by static traps.

Polarizable Anionic Sublattices Can Screen Molecular Dipoles in Noncentrosymmetric Inorganic-Organic Hybrids.

We report the growth and photophysical characterization of two polar hybrid lead halide phases, methylenedianiline lead iodide and bromide, (MDA)Pb2I6 and (MDA)Pb2Br6, respectively. The phases crystallize in noncentrosymmetric space group Fdd2, which produces a highly oriented molecular dipole moment that gives rise to second harmonic generation (SHG) upon excitation at 1064 nm. While both compositions are isostructural, the size dependence of the SHG signal suggests that the bromide exhibits a stronger phase-matching response whereas the iodide exhibits a significantly weaker non-phase-matching signal. Similarly, fluorescence from (MDA)Pb2Br6 is observed around 630 nm below 75 K whereas only very weak luminescence from (MDA)Pb2I6 can be seen. We attribute the contrasting optical properties to differences in the character of the halide sublattice and postulate that the increased polarizability of the iodide ions acts to screen the local dipole moment, effectively reducing the local electric field in the crystals.

Reversible Intercalation of Li Ions in an Earth-Abundant Phyllosilicate Clay.

The phyllosilicate family of clays is an intriguing collection of materials that make ideal models for studying the intercalation of alkali ions due to their layered topology and broadly tunable composition space. In this spirit, we present a hydrothermal method to prepare a layered iron phyllosilicate clay, Fe2Si4O10(OH)2, and an evaluation of its electrochemical performance for the (de)insertion of Li ions. Through careful structural refinement, we determined that this iron clay contains a 2:1 stacking sequence, which is directly analogous to the widely studied mineral montmorillonite, with the crystallites adopting a platelike morphology. Cyclic voltammetry and galvanostatic cycling reveal reversible insertion of lithium into the interstitial layers via a solid solution mechanism. Comparison of ion (de)intercalation with reports on other clay systems like muscovite, KFe2.75Si3.25O10(OH)2, which features a rigidly bound interlayer cation, demonstrates that controlling the net charge on the layers with phyllosilicate minerals is a route to enabling reversible cationic intercalation within the structure.

Magnetic-Field-Induced Dielectric Anomalies in Cobalt-Containing Garnets.

Here we present a comparative study of the magnetic and crystal chemical properties of two Co2+ containing garnets. CaY2Co2Ge3O12 (which has been reported previously) and NaCa2Co2V3O12 both exhibit the onset of antiferromagnetic order around 6 K as well as field-induced transitions around 7 and 10 T, respectively, that manifest as anomalies in the dielectric properties of the material. We perform detailed crystal-chemistry analyses and complementary density functional theory calculations to show that very minor changes in the local environment of the Co ions explain the differences in the two magnetic structures and their respective properties.

Vibrational Sum Frequency Generation Spectroscopy of Surface Hydroxyls on Nickel Phyllosilicate Nanoscrolls.

Phyllosilicate clays are layered structures with diverse nanoscale morphology depending on the composition. Size mismatch between the sheets can cause them to form nanoscrolls, a spiral structure with different inner and outer surface charges. The hydroxyls on the exposed surface of the nanoscrolls determine the adsorption properties and hydrophilicity of the surface. Vibrational sum frequency generation (VSFG) spectroscopy was applied to study the surface hydroxyls of nickel phyllosilicate (Ni3Si2O5(OH)4), revealing three distinct in-phase OH-stretch modes: 3642, 3645, and 3653 cm-1. The relative signs of the peaks allow their assignment as "outward" and "inward" pointing hydroxyls on the opposite sides of the scrolled sheet, consistent with the crystal structure. Orientational analysis of polarization-selected VSFG spectra is consistent with a broad (140-164°) step-function distribution of the OH-stretch tilt angles, which we attribute to the uncompensated portion of the scroll rolled more than a whole number of full turns.

Influence of the Cubic Sublattice on Magnetic Coupling between the Tetrahedral Sites of Garnet.

We present a study on the nuclear and magnetic structures of two iron-based garnets with magnetic cations isolated on tetrahedral sites. Ca2YZr2Fe3O12 and Ca2LaZr2Fe3O12 offer an interesting comparison for examining the effect of increasing cation size within the diamagnetic backbone of the garnet crystal structure, and how such changes affect the magnetic order. Despite both systems exhibiting well-pronounced magnetic transitions at low temperatures, we also find evidence for diffuse magnetic scattering due to a competition between the nearest-neighbor, next nearest-neighbor, and so on, within the tetrahedral sites. This competition results in a complex noncollinear magnetic structure on the tetrahedral sublattice creating a mixture of ferro- and antiferromagnetic interactions above the long-range ordering temperature near 20 K and suggests that the cubic site of the garnet plays a significant role in mediating the superexchange interactions between tetrahedral cations.

Canting of the Magnetic Moments on the Octahedral Site of an Iron Oxide Garnet in Response to Diamagnetic Cation Substitution.

Using neutron powder diffraction and magnetic susceptibility measurements, we report on the preparation and characterization of the temperature- and field-dependent properties of CaY2ZrFe4O12, a composition closely related to the high-temperature ferrimagnet Y3Fe5O12. By diluting the concentration of paramagnetic ions on the octahedral sublattice of the garnet structure, we find temperature-dependent canting of the magnetic moments. This reflects the importance of the octahedral sublattice in mediating the magnetic interactions between the tetrahedral sites and offers insight into a large number of competing magnetic interactions in the garnet structure.

Influence of Dimethyl Sulfoxide on the Structural Topology during Crystallization of PbI2.

Hybrid metal-organic halides are an exciting class of materials that offer the opportunity to examine how fundamental aspects of chemical bonding can influence the structural topology. In this work, we describe how solvent adducts of lead halides can influence the crystallization and subsequent annealing of these hybrid phases. While the size and shape of organic molecules are known to govern the final topology of the hybrid, we show that the affinity of solvent molecules for Pb ions may also play a previously underappreciated role.

High frequency atomic tunneling yields ultralow and glass-like thermal conductivity in chalcogenide single crystals.

Crystalline solids exhibiting glass-like thermal conductivity have attracted substantial attention both for fundamental interest and applications such as thermoelectrics. In most crystals, the competition of phonon scattering by anharmonic interactions and crystalline imperfections leads to a non-monotonic trend of thermal conductivity with temperature. Defect-free crystals that exhibit the glassy trend of low thermal conductivity with a monotonic increase with temperature are desirable because they are intrinsically thermally insulating while retaining useful properties of perfect crystals. However, this behavior is rare, and its microscopic origin remains unclear. Here, we report the observation of ultralow and glass-like thermal conductivity in a hexagonal perovskite chalcogenide single crystal, BaTiS3, despite its highly symmetric and simple primitive cell. Elastic and inelastic scattering measurements reveal the quantum mechanical origin of this unusual trend. A two-level atomic tunneling system exists in a shallow double-well potential of the Ti atom and is of sufficiently high frequency to scatter heat-carrying phonons up to room temperature. While atomic tunneling has been invoked to explain the low-temperature thermal conductivity of solids for decades, our study establishes the presence of sub-THz frequency tunneling systems even in high-quality, electrically insulating single crystals, leading to anomalous transport properties well above cryogenic temperatures.

Synthesis, Crystal Structure, and Cooperative 3d-5d Magnetism in Rock Salt Type Li4NiOsO6 and Li3Ni2OsO6.

Two new transition metal oxides with the nominal chemical compositions of Li4NiOsO6 and Li3Ni2OsO6 were successfully synthesized. Both compounds crystallize in an ordered rock salt structure type in the monoclinic C2/m space group. The crystal structures were determined using both synchrotron X-ray and time-of-flight neutron, powder diffraction data. In both phases, Ni2+ ions are present while oxidation states of osmium are +6 and +5 in Li4NiOsO6 and Li3Ni2OsO6, respectively. Ni2+ ions in the hypothetical fully ordered phase form a honeycomb arrangement in the ab crystallographic plane and these hexagons are centered by osmium ions. The magnetic layers are separated along the c axis by the octahedra, which are centered by Li+ (or Li+/Ni2+, depending on the chemical compositions). Crystal structure refinements reveal that there is some degree of mixed occupancy in cationic positions. Temperature dependent magnetic susceptibility data for both phases show ferrimagnetic transitions with predominant antiferromagnetic (AFM) interactions among 3d electrons of nickel and 5d electrons of osmium. Iso-thermal magnetization loops as a function of the applied magnetic field below the transition temperatures confirm the ferrimagnetic nature in magnetic transitions. Temperature dependent heat capacity data, however, did not exhibit any anomaly in either phase, indicating the absence of long-range magnetic ordering. The lack of long-range order for both Os5+ and Os6+-based compounds was also confirmed by low temperature neutron diffraction data down to 10 K. Temperature dependent AC magnetic susceptibility data in various frequencies for both samples indicate that Li4NiOsO6 exhibits spin-glass-like behavior, while the transition temperature for Li3Ni2OsO6 is nearly frequency independent.

Multielectron, Cation and Anion Redox in Lithium-Rich Iron Sulfide Cathodes.

Conventional Li-ion cathodes store charge by reversible intercalation of Li coupled to metal cation redox. There has been increasing interest in new materials capable of accommodating more than one Li per transition-metal center, thereby yielding higher charge storage capacities. We demonstrate here that the lithium-rich layered iron sulfide Li2FeS2 as well as a new structural analogue, LiNaFeS2, reversibly store ≥1.5 electrons per formula unit and support extended cycling. Ex situ and operando structural and spectroscopic data indicate that delithiation results in reversible oxidation of Fe2+ concurrent with an increase in the covalency of the Fe-S interactions, followed by reversible anion redox: 2 S2-/(S2)2-. S K-edge spectroscopy unequivocally proves the contribution of the anions to the redox processes. The structural response to the oxidation processes is found to be different in Li2FeS2 in contrast to that in LiNaFeS2, which we suggest is the cause for capacity fade in the early cycles of LiNaFeS2. The materials presented here have the added benefit of avoiding resource-sensitive transition metals such as Co and Ni. In contrast to Li-rich oxide materials that have been the subject of so much recent study and that suffer capacity fade and electrolyte degradation issues, the materials presented here operate within the stable potential window of the electrolyte, permitting a clearer understanding of the underlying processes.

Solution Deposition of a Bournonite CuPbSbS3 Semiconductor Thin Film from the Dissolution of Bulk Materials with a Thiol-Amine Solvent Mixture.

There is considerable interest in the exploration of new solar absorbers that are environmentally stable, absorb through the visible, and possess a polar crystal structure. Bournonite CuPbSbS3 is a naturally occurring sulfosalt mineral that crystallizes in the noncentrosymmetric Pmn21 space group and possesses an optimal band gap for single junction solar cells; however, the synthetic literature on this quaternary semiconductor is sparse and it has yet to be deposited and studied as a thin film. Here we describe the ability of a binary thiol-amine solvent mixture to dissolve the bulk bournonite mineral as well as inexpensive bulk CuO, PbO, and Sb2S3 precursors at room temperature and ambient pressure to generate an ink. The synthetic compound ink derived from the dissolution of the bulk binary precursors in the right stoichiometric ratios yields phase-pure thin films of CuPbSbS3 upon solution deposition and annealing. The resulting semiconductor thin films possess a direct optical band gap of 1.24 eV, an absorption coefficient ∼105 cm-1 through the visible, mobilities of 0.01-2.4 cm2 (V·s)-1, and carrier concentrations of 1018 - 1020 cm-3. These favorable optoelectronic properties suggest CuPbSbS3 thin films are excellent candidates for solar absorbers.

Room Temperature Metallic Conductivity in a Metal-Organic Framework Induced by Oxidation.

Metal-organic frameworks (MOFs) containing redox active linkers have led to hybrid compounds exhibiting high electrical conductivity, which enables their use in applications in electronics and electrocatalysis. While many computational studies predict two-dimensional (2D) MOFs to be metallic, the majority of experiments show decreasing conductivity on cooling, indicative of a gap in the electronic band structure. To date, only a handful of MOFs have been reported that exhibit increased electrical conductivity upon cooling indicative of a metallic character, which highlights the need for a better understanding of the origin of the conductivity. A 2D MOF containing iron bis(dithiolene) motifs was recently reported to exhibit semiconducting behavior with record carrier mobility. Herein, we report that high crystallinity and the elimination of guest species results in an iron 2,3,6,7,10,11-tripheylenehexathiolate (THT) MOF, FeTHT, exhibiting a complex transition from semiconducting to metallic upon cooling, similar to what was shown for the analogous CoTHT. Remarkably, exposing the FeTHT to air significantly influences the semiconducting-to-metallic transition temperature (100 to 300 K) and ultimately results in a material showing metallic-like character at, and above, room temperature. This study indicates these materials can tolerate a substantial degree of doping that ultimately results in charge delocalization and metallic-like conductivity, an important step toward enabling their use in chemiresistive sensing and optoelectronics.

Anionic order and band gap engineering in vacancy ordered triple perovskites.

We demonstrate that the optical absorption of the vacancy-ordered triple perovskite, Cs3Bi2Br9, can be significantly red-shifted by substituting Br with I while maintaining the layered structural topology. We also present evidence that Br ions prefer to occupy the bridging halide position within the layers in order to minimize strain within the lattice that results from the incorporation of the significantly larger iodide anions into the lattice. These results not only quantify the upper limit for I content in the layered polymorph, but also establish the minimum band gap obtainable from these Bi-based phases.

Synthesis, Crystal Structure, and Magnetic Properties of the Highly Frustrated Orthorhombic Li4MgReO6.

In an effort to understand the structure-property relationship in magnetically frustrated systems, an orthorhombic analog of the S = 1/2 Re-based oxide Li4MgReO6 has been successfully synthesized and its physical properties were investigated. Li4MgReO6 had been previously synthesized in a monoclinic system in an ordered NaCl structure type. That system was shown to exhibit spin glass behavior below ∼12 K. The crystal structure of the latter phase was determined using powder X-ray diffraction data. A structural model was refined in the orthorhombic Fddd space group that resulted in cell dimensions of a = 5.84337 (7) Å, b = 8.33995 (9) Å, and c = 17.6237 (2) Å. The magnetic ions, Re6+ (S = 1/2), consist of various arrangements of interconnected triangles and trigonal prisms that offer potential for geometric magnetic frustration. Temperature dependent magnetic susceptibility reveals an AFM transition below ∼2 K along with a ZFC/FC divergence suggestive of spin freezing. The Curie-Weiss fitting parameters to the paramagnetic regime result in θ = -124 (1) K, which is indicative of predominant AFM interactions. A frustration index of ∼62 is in accordance with a highly frustrated magnetic ground state. Zero field (ZF) µSR data provides evidence for the onset of magnetic order below 4 K, along with the evidence for dynamical fluctuations up to 5 K. Moreover, longitudinal field (LF) µSR data reveals a complete decoupling in applied field at 2 K, which is indicative of static order in most or all of the volume fraction at ∼2 K, with partial ordered volumes coexisting with dynamical fluctuations up to 5 K. Estimates of the relative strengths of various magnetic exchange pathways at the level of spin-dimer analysis for this novel system are calculated and are compared to those of the previously reported values for the monoclinic analog.

Hydrothermal Preparation, Crystal Chemistry, and Redox Properties of Iron Muscovite Clay.

The development of functional materials based on Earth-abundant, environmentally benign compositions is critical for ensuring their commercial viability and sustainable production. Here we present an investigation into the crystal chemistry and electrochemical properties of the muscovite clay KFe2.75Si3.25O10(OH)2. We first report a low-temperature hydrothermal reaction that allows for a significant degree of control over sample crystallinity, particle morphology, and cation distribution through the lattice. A complex sequence of stacking faults is identified and characterized using a combination of Mössbauer spectroscopy and total scattering neutron experiments. We then show the existence of a reversible electrochemical process using galvanostatic cycling with complementary cyclic voltammetry suggesting that the redox activity occurs primarily on the surface of the particles. We conclude by determining that the ability to (de)intercalate Li ions from the material is hindered by the strong negative charge on the transition metal silicate layers, which prevents the displacement of the interlayer K ions. This work calls attention to a hugely Earth-abundant family of minerals that possesses useful electrochemical properties that warrant further exploration.

Metallic Conductivity in a Two-Dimensional Cobalt Dithiolene Metal-Organic Framework.

Two-dimensional (2D) metal-organic frameworks (MOFs) have received a great deal of attention due to their relatively high charge carrier mobility and low resistivity. Here we report on the temperature-dependent charge transport properties of a 2D cobalt 2,3,6,7,10,11-triphenylenehexathiolate framework. Variable temperature resistivity studies reveal a transition from a semiconducting to a metallic phase with decreasing temperature, which is unprecedented in MOFs. We find this transition to be highly dependent on the film thickness and the amount of solvent trapped in the pores, with density functional theory calculations of the electronic-structure supporting the complex metallic conductivity of the material. These results identify the first experimentally observed MOF that exhibits band-like metallic conductivity.