Studies of Pb2+ adsorption by Moringa oleifera Lam. seeds from an aqueous medium in a batch system.

The efficiency of Moringa (Moringa oleifera Lam.) seeds for removing lead ions (Pb(2+)) from water was evaluated. Parameters such as solution pH, adsorbent mass, contact time between solution and adsorbent, isotherms, thermodynamic, kinetics, and desorption were evaluated. The maximum adsorption capacity of the biosorbent was found to be 12.24 mg g(-1). In order to verify the effectiveness of this material, comparative studies were performed with activated carbon under the same optimal conditions for the construction of isotherms and the desorption process. Average desorption rate values led to the assumption that a strong interaction took place between the adsorbents and the metal ions. Thus, it has been concluded that the biosorbent studied herein can be considered very effective and feasible for remediating Pb(2+)-contaminated solutions, since this material is itself an untreated and low-cost byproduct.

Removal of cadmium from water using by-product Crambe abyssinica Hochst seeds as biosorbent material.

The effectiveness of Crambe abyssinica Hochst seeds by-product as a biosorbent for the removal of cadmium ions from wastewater was analyzed. The biomass of crambe was characterized by scanning electron microscopy, infrared spectroscopy and determining the point of zero charge. The optimum adsorption conditions obtained were 400 mg of biomass in a solution of pH 6.0 and contact time of 60 min to remove 19.342 mg g(-1) cadmium ions. The isotherms of adsorption were constructed and, according to the mathematical linearization, the best fitting followed the Freundlich and Dubinin-Radushkevich models, describing a multilayer adsorption and chemical interaction, also confirmed by the pseudo-second order model and enthalpy value. In the desorption process, about 79% of cadmium ions that had been adsorbed were recovered. The same conditions applied for studying the isotherms of adsorption and desorption were used for comparative study with activated carbon. It was concluded that the use of crambe by-product as biosorbent for cadmium removal in wastewaters was not only a viable alternative to activated carbon, but also required no previous treatment, so it represents a sustainable material with high applicability and low environmental impact.