Optimization of roughing filtration unit for a handwashing wastewater recirculation point-of-use system.

A downward roughing filter unit consisting of silica sand as the filter medium was optimized for performance towards removal of turbidity and suspended solids from handwashing wastewater. Design-Expert software was employed to optimize media particle size, filter depth, and flowrate. Linear and quadratic models were found to best fit the responses of turbidity and suspended solids removal, respectively. Particle size and flow rate were the only parameters with significant effects on removal of turbidity and suspended solids. Optimal conditions were found to be media particle size 0.6 mm, filter depth 12 cm, and flow rate 0.3 Lmin-1, corresponding to removal efficiencies of 62 and 67% for turbidity and total suspended solids (TSS), respectively, as predicted by the model. Validation of model at optimal conditions resulted in turbidity and TSS removal of 55 and 53%, respectively. Additionally, removal efficiencies of the roughing filter towards apparent colour, true colour, biochemical oxygen demand (BOD5), and chemical oxygen demand (COD) from handwashing wastewater were 56, 20, 32, and 5%, respectively. Overall, although turbidity of filtered water was >50 NTU, the reduction achieved by roughing filtration is a significant step in enhancing the performance of water treatment processes downstream, including filtration and adsorption by slow sand filters and activated carbon, respectively.

Development and appraisal of handwash-wastewater treatment system for water recycling as a resilient response to COVID-19.

In this work, results from characterization of handwashing wastewater from selected stations in Kampala City, Uganda, revealed that handwashing wastewater did not meet permissible international standards for wastewater discharge to the environment. The ratio of BOD5 to COD of ˂ 0.5 implied that handwashing wastewater was not amenable to biological treatment processes. Turbidity of ˃ 50 NTU pointed to the need for a roughing filter prior to slow sand filtration. Subsequently, a handwashing wastewater treatment system consisting of selected particle sizes of silica sand, zeolite, and granular activated carbon as filtration and/or adsorption media was developed and assessed for performance towards amelioration of the physicochemical and biological parameters of the handwashing wastewater. Treated water from the developed wastewater treatment system exhibited a turbidity of 5 NTU, true color of 10 Pt-Co, apparent color of 6 Pt-Co, and TSS of 9 mgL-1, translating to removal efficiencies of up to 98.5%, 98.1%, 99.7%, and 96.9%, respectively. The residual total coliforms and E. coli of 1395 and 1180 CFU(100 mL)-1 respectively, were totally eliminated upon disinfection with 0.5 mL NaOCl (3.5% wt/vol) per liter of treated wastewater. The treated water was thus suitable for recycling for handwashing purpose as opposed to letting handwashing wastewater merely go down the drain. This approach provides a resilient response to COVID-19, where communities faced with water scarcity can treat and recycle handwashing wastewater at the point of washing. It thus enables more people to have the opportunity to practice handwashing, abating the high risks of infection, which could otherwise arise.