Experimental study of the POP technique: focus on the physical basis of the process.

INTRODUCTION: Central or peripheral vascular access devices have been in use for many decades. However, despite adequate care and maintenance, complete occlusion may occur, and its impact cannot be overlooked. A new procedure using a percussion technique has been published and referred as 'the POP technique'. METHODS: A hydrodynamic bench was used permitting both the recording of the movement of the piston with a fast camera and the pressure variations in the polyurethane and silicone catheters while connected to 2- and 3-piece syringes. RESULTS: The results are twofold. First the upward movement of the piston leads to the installation of a saturation vapour pressure in the body of the syringe. During this sequence, the clot is submitted to a force of aspiration. Then the release of the plunger leads to a pulse pressure whose dynamics and intensity are dependent of the types of syringes and catheters. CONCLUSIONS: The experiments bring to light the importance of practical features such as the orientation of the syringe and the nature of the polyurethane or silicone catheters. Then the analysis enables the definition of practical rules for safe practice of the POP technique. This study will impact clinicians as many may be tempted to use the technique in hope to resolve the occlusion safely, in a timely manner.

Mechanical characteristics of plastic base Ports and impact on flushing efficacy.

BACKGROUND: Three types of totally implantable venous access devices, Ports, are currently in use: titanium, plastic (polyoxymethylene, POM), and mixed (titanium base with a POM shell). Physics theory suggests that the interaction between a non-coring needle (NCN, made of stainless steel) and a plastic base would lead to the stronger material (steel) altering the more malleable material (plastic). OBJECTIVES: To investigate whether needle impacts can alter a plastic base's surface, thus potentially reducing flushing efficacy. STUDY DESIGN AND METHODS: A Port made of POM was punctured 200 times with a 19-gauge NCN. Following the existing guidelines, the needle tip pricked the base with each puncture. The Port's base was then examined using a two-dimensional optical instrument, and a bi-dimensional numerical simulation using COMSOL® was performed to investigate potential surface irregularities and their impact on fluid flow. RESULTS: Each needle impact created a hole (mean depth, 0.12 mm) with a small bump beside it (mean height, 0.02 mm) the Reynolds number Rek≈10. A numerical simulation of the one hole/bump set showed that the flushing efficacy was 60% that of flushing along a flat surface. DISCUSSION: In clinical practice, the number of times a Port is punctured depends on patient and treatment characteristics, but each needle impact on the plastic base may increase the risk of decreased flushing effectiveness. Therefore, the more a plastic Port is accessed, the greater the risk of microorganisms, blood products, and medication accumulation. CONCLUSIONS: Multiple needle impacts created an irregular surface on the Port's base, which decreased flushing efficacy. Clinical investigation is needed to determine whether plastic base Ports are associated with an increased risk of Port infection and occlusion compared to titanium base Ports.

Impact of the shape of the needle tip on the efficacy of flushing implantable port chambers.

INTRODUCTION: To follow international guidelines and protect healthcare workers from needle stick injuries, manufacturers now provide safety non-coring needles. METHODS: Numerical simulations show the potential efficacy of infusion and flushing flow in straight and curved side wall port chambers from a beveled non-coring needle (BNCN) or a bevel-free cannula (BFC). RESULTS: In straight and curved side wall port chambers, the stream of flow with a BNCN is determined by the direction of the bevel, whereas the outlet stream from a BFC leads to a cylindrical symmetric flow. This, along with the position of the BFC impacts the wall shear rate of the port chamber, and the hydraulic resistance within the chamber. DISCUSSION: This last factor has never been the subject of extensive hydrodynamic study. Caregiver safety and patient comfort are paramount but physics show that the shape of the needle tip affects the hydrodynamics of the injected flow. CONCLUSIONS: The presence of a bevel at the needle tip is a key factor for ensuring efficient flushing of the port. The absence of a bevel may increase hydraulic resistance and deposits in the port chamber. Implantable port flushing protocols must take this notion into account if the patency of port chambers is to be maintained. The clinical impact of this study has yet to be determined.

Toward the modeling of mucus draining from human lung: role of airways deformation on air-mucus interaction.

Chest physiotherapy is an empirical technique used to help secretions to get out of the lung whenever stagnation occurs. Although commonly used, little is known about the inner mechanisms of chest physiotherapy and controversies about its use are coming out regularly. Thus, a scientific validation of chest physiotherapy is needed to evaluate its effects on secretions. We setup a quasi-static numerical model of chest physiotherapy based on thorax and lung physiology and on their respective biophysics. We modeled the lung with an idealized deformable symmetric bifurcating tree. Bronchi and their inner fluids mechanics are assumed axisymmetric. Static data from the literature is used to build a model for the lung's mechanics. Secretions motion is the consequence of the shear constraints apply by the air flow. The input of the model is the pressure on the chest wall at each time, and the output is the bronchi geometry and air and secretions properties. In the limit of our model, we mimicked manual and mechanical chest physiotherapy techniques. We show that for secretions to move, air flow has to be high enough to overcome secretion resistance to motion. Moreover, the higher the pressure or the quicker it is applied, the higher is the air flow and thus the mobilization of secretions. However, pressures too high are efficient up to a point where airways compressions prevents air flow to increase any further. Generally, the first effects of manipulations is a decrease of the airway tree hydrodynamic resistance, thus improving ventilation even if secretions do not get out of the lungs. Also, some secretions might be pushed deeper into the lungs; this effect is stronger for high pressures and for mechanical chest physiotherapy. Finally, we propose and tested two a dimensional numbers that depend on lung properties and that allow to measure the efficiency and comfort of a manipulation.

Pulsative flushing as a strategy to prevent bacterial colonization of vascular access devices.

Central venous device infections are associated with increased physical and psychological morbidity, mortality, length of stay, and costs. The aim of this study was to prove the efficacy of pulsatile flushing to prevent the bacterial colonization of vascular access devices. One hundred and forty four tests using 576 polyurethane short venous access catheters were performed. Four catheters per test were polluted with a fibronectin-serum albumin solution. Three were filled with a Staphylococcus aureus broth; one served as negative control. One contaminated catheter was not flushed (positive control), and two were flushed (10 mL.sec(-1)) with normal saline solution, either by ten successive boluses of 1 mL each or by one bolus of 10 mL. Each catheter was cultivated. The S. aureus quantity observed after continuous flushing was significantly higher than that observed after pulsative flushing (P<0.001). Unflushed catheters were 20.71 and 6.42 times more polluted than catheters flushed with the pulsative method or the continuous method, respectively. Pulsative flushing was at least twice as effective as continuous flushing in reducing the S. aureus count. Pulsative flushing is more effective than continuous flushing in reducing the endoluminal contamination. Pulsative flushing is a simple, effective, and inexpensive technique to reduce catheter bacterial colonization.

Impact of the shape of the implantable ports on their efficiency of flow (injection and flushing).

Now widely used, totally implantable venous access devices allow mid- and long-term, frequent, repeated, or continuous injection of therapeutic products by vascular, cavitary, or perineural access. The effective flushing of these devices is a key factor that ensures their long-lasting use. We present experimental results and a numerical simulation to demonstrate that the implementation of rounded edge wall cavities improves flushing efficiency. We use the same approaches to suggest that the deposit amount may be reduced by the use of rounded edge wall cavities.

Power port contrast medium flushing and trapping: impact of temperature, an in vitro experimental study.

PURPOSE: The use of totally implantable venous access devices (TIVADs) certified as "high pressure resistant" or "power port" has begun to spread worldwide as a safe procedure for power contrast injection. Owing to the thermo-rheological properties of the contrast media, the primary aim of this work is to present an in vitro experimental impact study concerning the impact of the temperature level on flushing efficiency after contrast medium injection. Moreover, we report experimental data that confirms the role of needle bevel orientation. The secondary aim is to answer the following questions: Is there significant device contrast medium trapping after contrast medium injection? Is saline flushing efficient? And, finally, is it safe to inject contrast medium through an indwelled port catheter? RESULTS: The experimental results show that in addition to hydrodynamics, temperature is a key parameter for the efficiency of device flushing after contrast medium injection. It appears that this is the case when the cavity is incompletely rinsed after three calibrated flushing volumes of 10 mL saline solution, even by using the Huber needle bevel opposite to the port exit. This leads to a potentially important trapped volume of contrast medium in the port, and consequently to the possibility of subsequent salt precipitates and long term trisubstituted benzene nuclei delivery that might impair the solute properties, which may be further injected via the power port later on. CONCLUSION: We thus suggest, in TIVADS patients, the use of a temporary supplementary intravenous line rather than the port to perform contrast medium injections in daily radiology routine practice.

Flushing ports of totally implantable venous access devices, and impact of the Huber point needle bevel orientation: experimental tests and numerical computation.

The use of totally implantable venous access devices developed as a medical device allowing mid- and long-term, frequent, repeated, or continuous injection of therapeutic products, by vascular, cavitary, or perineural access. The effective flushing of these devices is a central element to assure long-lasting use. Our experimental work demonstrates that directing the Huber point needle opening in the diametrically opposite direction of the implantable port exit channel increases the flushing efficiency. These results are consolidated by numerical computations, which support recommendations not only for their maintenance, but also for their use.

Flushing of intravascular access devices (IVADs) - efficacy of pulsed and continuous infusions.

PURPOSE: To compare, under controlled conditions similar to practical situations, the efficacy of pulsed and continuous infusion for flushing IVADs. For both of them different flow rates, flushing volumes, and times were tested. METHODS: The PU catheter lumens were filled with a mixture of fibronectin and bovine albumin to simulate physiologic protein depot. Flushing was performed with normal saline. An adapted pump controlled the flow rates. Efficacy was measured by the amount of albumin recovered from the lumen of the tested devices. Flow rate, volumes, and times tested were based upon values reported and/or measured in nursing practices. We compared: (A) single 10 mL bolus and 6 flushing times, (B) continuous infusion of 500 mL in 24 hours, (C) 10 successive boluses 1 mL flushed in 0.5 s each and 6 different time intervals between each bolus. Statistics were performed using the Mann and Whitney U test. RESULTS: In group A, the maximum percentage of recovered protein (79.1% was achieved with the 10 mL bolus flushed in 2.5. In group B, 77% of protein was recovered at 24h. In group C: maximum efficacy (90 +/- 3%) was obtained when the time interval between 2 boluses was 0.4 s. CONCLUSIONS: We conclude that hydrodynamics has a determinant effect on the efficacy and that the adjunction of an intermittent component in the flow increases it. Flow type and the time interval between 2 boluses are the 2 critical variables.

Toward the modeling of mucus draining from the human lung: role of the geometry of the airway tree.

Mucociliary clearance and cough are the two main natural mucus draining methods in the bronchial tree. If they are affected by a pathology, they can become insufficient or even ineffective, then therapeutic draining of mucus plays a critical role to keep mucus levels in the lungs acceptable. The manipulations of physical therapists are known to be very efficient clinically but they are mostly empirical since the biophysical mechanisms involved in these manipulations have never been studied. We develop in this work a model of mucus clearance in idealized rigid human bronchial trees and focus our study on the interaction between (1) tree geometry, (2) mucus physical properties and (3) amplitude of flow rate in the tree. The mucus is considered as a Bingham fluid (gel-like) which is moved upward in the tree thanks to its viscous interaction with air flow. Our studies point out the important roles played both by the geometry and by the physical properties of mucus (yield stress and viscosity). More particularly, the yield stress has to be overcome to make mucus flow. Air flow rate and yield stress determine the maximal possible mucus thickness in each branch of the tree at equilibrium. This forms a specific distribution of mucus in the tree whose characteristics are strongly related to the multi-scaled structure of the tree. The behavior of any mucus distribution is then dependent on this distribution. Finally, our results indicate that increasing air flow rates ought to be more efficient to drain mucus out of the bronchial tree while minimizing patient discomfort.

Mechanical performances of elastomers used in diffusers.

The use of elastomeric diffusers (EDs) has grown together with the expansion of home care. In these devices, the fill volume of the drug reservoir and the flow rate are preset and cannot be modified. The elastomer, which makes up the reservoir walls, is what makes the infusate flow due to the pressure it exerts. The purpose of this work was to quantify, under standardized experimental conditions and following recommended conditions of use, the mechanical performances of the 2 commonly used elastomers (silicone and polyisoprene) and their impact on infusion flow rate consistency. Results show that they exhibit different mechanical performances which leads to concerns regarding the use of these devices for some intravenous (IV) therapies.

Percutaneous insertion of the pulmonary valve.

OBJECTIVES: We report our experience of percutaneous valve insertion in pulmonary position in humans. BACKGROUND: Over the past 40 years, prosthetic conduits have been developed to surgically establish continuity between the right ventricle and the pulmonary artery. However, stenosis and insufficiency of the conduit due to valvular degeneration or panus ingrowth frequently occur, limiting patients' lifespan. Percutaneous stenting of conduits has recently emerged as a technique for delaying surgical replacement, but it creates a pulmonary regurgitation when crossing the valve. METHODS: Seven children and one adult with stenosis and/or insufficiency of the pulmonary graft underwent percutaneous implantation of a bovine jugular valve in pulmonary position. RESULTS: Percutaneous pulmonary valve (PV) replacement was successful in all patients. No complications occurred in early follow-up. Angiography, hemodynamic studies and echocardiography after the procedure showed no significant regurgitation of the implanted valve. Implantation was effective in relieving the obstruction in five patients. All patients showed improvement in their clinical status at the latest follow-up (mean 10.1 months). CONCLUSIONS: Non-surgical insertion of the PV is possible without any major complications. This new technique may have an important role in the management of conduit obstructions and pulmonary regurgitation.