CO2 Electroreduction To Syngas With Tunable Composition In An Artificial Leaf.

Invited for this month's cover is the group of Javier Pérez-Ramírez at ETH Zürich, which collaborated with the group of Tsvetelina Merdzhanova at Forschungszentrum Jülich. The image shows how artificial leaves, able to recycle carbon dioxide into syngas of variable composition, could be integrated with chemical plants. The Research Article itself is available at 10.1002/cssc.202301398.

CO2 Electroreduction To Syngas With Tunable Composition In An Artificial Leaf.

Artificial leaves (a-leaves) can reduce carbon dioxide into syngas using solar power and could be combined with thermo- and biocatalytic technologies to decentralize the production of valuable products. By providing variable CO : H2 ratios on demand, a-leaves could facilitate optimal combinations and control the distribution of products in most of these hybrid systems. However, the current design procedures of a-leaves concentrate on achieving high performance for a predetermined syngas composition. This study demonstrates that incorporating the electrolyte flow as a design variable enables flexible production without compromising performance. The concept was tested on an a-leaf using a commercial cell, a Cu2 O:Inx cathodic catalyst, and an inexpensive amorphous silicon thin-film photovoltaic module. Syngas with CO : H2 ratio in the range of 1.8-2.3 could be attained with only 2 % deviation from the optimal cell voltage and controllable solely by catholyte flow. These features could be beneficial for downstream technologies such as Fischer-Tropsch synthesis and anaerobic fermentation.

Toward the Integration of a Silicon/Graphite Anode-Based Lithium-Ion Battery in Photovoltaic Charging Battery Systems.

Solar photovoltaic (PV) energy generation is highly dependent on weather conditions and only applicable when the sun is shining during the daytime, leading to a mismatch between demand and supply. Merging PVs with battery storage is the straightforward route to counteract the intermittent nature of solar generation. Capacity (or energy density), overall efficiency, and stability at elevated temperatures are among key battery performance metrics for an integrated PV-battery system. The performance of high-capacity silicon (Si)/graphite (Gr) anode and LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode cells at room temperature, 45, and 60 °C working temperatures for PV modules are explored. The electrochemical performance of both half and full cells are tested using a specially formulated electrolyte, 1 M LiPF6 in ethylene carbonate: diethyl carbonate, with 5 wt % fluoroethylene carbonate, 2 wt % vinylene carbonate, and 1 wt % (2-cyanoethyl)triethoxysilane. To demonstrate solar charging, perovskite solar cells (PSCs) are coupled to the developed batteries, following the evaluation of each device. An overall efficiency of 8.74% under standard PV test conditions is obtained for the PSC charged lithium-ion battery via the direct-current-direct-current converter, showing the promising applicability of silicon/graphite-based anodes in the PV-battery integrated system.

Bioinspired phase-separated disordered nanostructures for thin photovoltaic absorbers.

The wings of the black butterfly, Pachliopta aristolochiae, are covered by micro- and nanostructured scales that harvest sunlight over a wide spectral and angular range. Considering that these properties are particularly attractive for photovoltaic applications, we analyze the contribution of these micro- and nanostructures, focusing on the structural disorder observed in the wing scales. In addition to microspectroscopy experiments, we conduct three-dimensional optical simulations of the exact scale structure. On the basis of these results, we design nanostructured thin photovoltaic absorbers of disordered nanoholes, which combine efficient light in-coupling and light-trapping properties together with a high angular robustness. Finally, inspired by the phase separation mechanism of self-assembled biophotonic nanostructures, we fabricate these bioinspired absorbers using a scalable, self-assembly patterning technique based on the phase separation of binary polymer mixture. The nanopatterned absorbers achieve a relative integrated absorption increase of 90% at a normal incident angle of light to as high as 200% at large incident angles, demonstrating the potential of black butterfly structures for light-harvesting purposes in thin-film solar cells.

Advancing tandem solar cells by spectrally selective multilayer intermediate reflectors.

Thin-film silicon tandem solar cells are composed of an amorphous silicon top cell and a microcrystalline silicon bottom cell, stacked and connected in series. In order to match the photocurrents of the top cell and the bottom cell, a proper photon management is required. Up to date, single-layer intermediate reflectors of limited spectral selectivity are applied to match the photocurrents of the top and the bottom cell. In this paper, we design and prototype multilayer intermediate reflectors based on aluminum doped zinc oxide and doped microcrystalline silicon oxide with a spectrally selective reflectance allowing for improved current matching and an overall increase of the charge carrier generation. The intermediate reflectors are successfully integrated into state-of-the-art tandem solar cells resulting in an increase of overall short-circuit current density by 0.7 mA/cm(2) in comparison to a tandem solar cell with the standard single-layer intermediate reflector.

Three-dimensional composition profiles of single quantum dots determined by scanning-probe-microscopy-based nanotomography.

Scanning probe microscopy combined with selective wet chemical etching is employed to quantitatively determine the full three-dimensional (3D) composition profiles of single strained SiGe/Si(001) islands. The technique allows us to simultaneously obtain 3D profiles for both coherent and dislocated islands and to collect data with large statistics. Lateral and vertical composition gradients are observed, and their origin is discussed. X-ray scattering measurements performed on a large sample area are used to validate the results.