Optimization of fermentation-relevant factors: A strategy to reduce ethanol in red wine by sequential culture of native yeasts.

Current consumer preferences are determined by well-structured, full-bodied wines with a rich flavor and with reduced alcohol levels. One of the strategies for obtaining wines with reduced ethanol content is sequential inoculation of non-Saccharomyces and Saccharomyces cerevisiae yeasts. However, different factors affect the production of metabolites like ethanol, glycerol and acetic acid by inoculated yeasts. In order to obtain low alcohol wines without quality loss, the aims of our study were: i) to determine optimum conditions (fermentation temperature and time of permanence and initial inoculum size of the non-Saccharomyces population at the beginning of the process, prior to inoculation with S. cerevisiae); ii) to validate the optimized factors; and iii) to assess sensory quality of the wines obtained after validation. Two combinations of yeasts were used in this study: Hanseniaspora uvarum BHu9/S. cerevisiae BSc114 and Candida membranaefaciens BCm71/S. cerevisiae BSc114. Optimization of three fermentation factors that affect to non-Saccharomyces yeasts prior to S. cerevisiae inoculation was carried out using a Box-Behnken experimental design. Applying the models constructed by Response Surface Methodology, the lowest ethanol production by H. uvarum BHu9/S. cerevisiae BSc114 co-culture was obtained when H. uvarum BHu9 was inoculated 48 h 37 min prior to S. cerevisiae inoculation, at a fermentation temperature of 25 °C and at an initial inoculum size of 5 × 106 cells/mL. Lowest alcohol production with C. membranaefaciens BCm71/S. cerevisiae BSc114 was observed when C. membranaefaciens BCm71 was inoculated 24 h 15 min prior to S. cerevisiae at a fermentation temperature of 24.94 °C and at an initial inoculum size of 2.72 × 106 cells/mL. The optimized conditions of the two co-cultures were subsequently submitted to lab-scale validation. Both proposed strategies yielded ethanol levels that were significantly lower than control cultures (S. cerevisiae). Wines fermented with non-Saccharomyces/Saccharomyces co-cultures under optimized conditions were also associated with higher aromatic complexity characterized by the presence of red fruit aromas, whereas wines obtained with S. cerevisiae BSc114 were described by parameters linked with high ethanol levels.

Culture-dependent and independent techniques to monitor yeast species during cold soak carried out at different temperatures in winemaking.

Transformation of grape must into wine is a process that may vary according to the consumers' requirements. Application of cold soak prior to alcoholic fermentation is a common practice in cellars in order to enhance flavor complexity and extraction of phenolic compounds. However, the effect of this step on wine yeast microbiota is not well-known. The current study simultaneously analyzed the effect of different cold soak temperatures on the microbiological population throughout the process and the use of culture-dependent and independent techniques to study this yeast ecology. The temperatures assayed were those normally applied in wineries: 2.5, 8 and 12°C. PCR-DGGE allowed detection of the most representative species such as Hanseniaspora uvarum, Starmerella bacillaris and Saccharomyces cerevisiae. As could be expected, highest diversity indices were obtained at the beginning of each process, and survival of H. uvarum or S. bacillaris depended on the temperature. Our results are in agreement with those obtained with culture independent methods, but qPCR showed higher precision and a different behavior was observed for each yeast species and at each temperature assayed. Comparison of both culture-independent techniques can provide a general overview of the whole process, although DGGE does not reveal the diversity expected due to the reported problems with the sensitivity of this technique.

Yeast population dynamics during prefermentative cold soak of Cabernet Sauvignon and Malbec wines.

Prefermentative cold soak is a widely used technique in red wine production, but the impact on the development of native yeast species is hardly described. The aim of this work was to analyse the dynamics and diversity of yeast populations during prefermentative cold soak in red wines. Three different temperatures (14 ± 1 °C; 8 ± 1 °C and 2.5 ± 1 °C) were used for prefermentative cold soak in Cabernet Sauvignon and Malbec grape musts. Saccharomyces and non-Saccharomyces populations during cold soak and alcoholic fermentation were analysed. In addition, the impact on chemical and sensory properties of the wines was examined. Yeast dynamics during prefermentative cold soak were temperature dependent. At 14 ± 1 °C, the total yeast population progressively increased throughout the cold soak period. Conversely, at 2.5 ± 1 °C, the yeast populations maintained stable during the same period. Prefermentative cold soak conducted at 14±1°C favoured development of Hanseniospora uvarum and Candida zemplinina, whereas cold soak conducted at 8 ± 1 °C favoured growth of Saccharomyces cerevisiae. At 2.5 ± 1 °C, no changes in yeast species were recorded. Acidity and bitterness, two sensory descriptors, appear to be related to wines produced with prefermentative cold soak carried out at 14 ± 1 °C. This fact could be associated with the increase in non-Saccharomyces during the prefermentation stage. Our results emphasise the importance of the temperature as a determinant factor to allow an increase in non-Saccharomyces population during prefermentative cold soak and consequently to modify sensorial attributes of wines as well as their sensorial impact.