SARS-CoV-2 Vaccination Coverage and Key Public Health Indicators May Explain Disparities in COVID-19 Country-Specific Case Fatality Rate Within European Economic Area.

Aim To investigate the reasons for disparity regarding the country-specific COVID-19-related case fatality rate (CFR) within the 30 countries of the European Economic Area (EEA). Materials and methods Data regarding population, area, COVID-19-associated infections/deaths, vaccination, life expectancy, elderly population, infant mortality, gender disparity, urbanization, gross domestic product (GDP), income per capita, health spending per capita, physicians, nursing personnel, hospital beds, ICU beds, hypertension, diabetes, obesity, and smoking from all EEA countries were collected from official sources on January 16, 2022. Correlation coefficients were computed, and optimal scaling using ridge regression was used to reach the most parsimonious multivariate model assessing any potential independent correlation of public health parameters with COVID-19 CFR. Results COVID-19 CFR ranges from 0.1% (Iceland) to 4.0% (Bulgaria). All parameters but population density, GDP, total health spending (% of GDP), ICU beds, diabetes, and obesity were correlated with COVID-19 CFR. In the most parsimonious multivariate model, elderly population rate (P = 0.018), males/total ratio (P = 0.013), nurses/hospital beds (P = 0.001), physicians/hospital beds (P = 0.026), public health spending (P = 0.013), smoking rate (P = 0.013), and unvaccinated population rate (P = 0.00005) were demonstrated to present independent correlation with COVID-19 CFR. In detail, the COVID-19 CFR is estimated to increase by 1.24 times in countries with vaccination rate of <0.34, 1.11 times in countries with an elderly population rate of ≥0.20, 1.14 times in countries with male ratio values ≥0.493, 1.12 times in countries spending <2,000$ annually per capita for public health, 1.14 and 1.10 times in countries with <2.30 nurses and <0.88 physicians per hospital bed, respectively, and 1.12 in countries with smoking ratio ≥0.22, while holding all other independent variables of the model constant. Conclusion COVID-19 CFR varies substantially among EEA countries and is independently linked with low vaccination rates, increased elderly population rate, diminished public health spending per capita, insufficient physicians and nursing personnel per hospital bed, and prevalent smoking habits. Therefore, public health authorities are awaited to consider these parameters in prioritizing actions to manage the SARS-CoV-2 pandemic.

Acute esophageal necrosis complicating diabetic ketoacidosis in a patient with type II diabetes mellitus and excessive cola consumption: a case report.

Acute esophageal necrosis (AEN) implicates poor tissue perfusion, functionally defective mucosal barrier, and corrosive injury of the esophageal mucosa, typically characterized by diffuse, circumferential greyish or black discoloration of the esophagus in esophagogastroduodenoscopy. Low-volume states, as diabetic ketoacidosis (DKA), predispose to AEN. Cola drinks diminish the esophageal pH by decreasing the lower esophageal sphincter pressure. We report a 47-year-old male shepherd with chest pain, nausea, odynophagia and gradual decline in level of consciousness, who reported consumption of 6-7 L of cola beverages per day, and was diagnosed with DKA. The patient had a record of type 2 diabetes mellitus and coronary heart disease, and he was administered empagliflozin 25 mg q24 hours, vildagliptin 50 mg bid, metformin 1000 mg bid, and insulin glargine 24 IU q 24. Esophagogastroduodenoscopy was indicative of a diffuse, edematous, and eroded mucosa of grey colour from the upper to the lower esophageal sphincter. CT scan supported the diagnosis, revealing diffuse thickening and edematous imaging of the esophageal wall with an abnormal edge of the mucosa in the lower half of the esophagus. Seven days after rigorous treatment with fluid resuscitation, insulin restoration, esomeprazole, fluconazole, cefoxitine, and metronidazole, the patient was ameliorated. A second endoscopy revealed obvious improvement. Pathophysiology, diagnosis, and treatment of DKA/AEN intertwining are thoroughly discussed. In conclusion, clinicians should not disregard AEN in the differential diagnosis of patients with DKA and clinical symptoms of esophagitis. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s13340-021-00537-y.

Spatial Distribution of Abdominal Aortic Aneurysm Surface Expansion and Correlation With Maximum Diameter and Volume Growth.

BACKGROUND: Abdominal aortic aneurysm (AAA) growth rate, measured as maximum diameter (Dmax) change over time, is used as a surrogate marker of rupture risk. However, AAA expansion presents significant spatial variability. We aim to record the spatial distribution of regional wall surface expansion. METHODS: Thirty AAAs were retrospectively studied. Each AAA had one baseline and at least one follow-up computed tomography scan. Three-dimensional AAA models were reconstructed, and change in Dmax and total aneurysm volume was recorded to calculate annual growth rates. Regional surface growth was quantified using the VascForm algorithm, which is based on nonrigid point cloud registration and iterative closest point analysis. Maximum and average surface growths were calculated and correlated with the diameter/volume growth rates. Furthermore, to identify potential correlation between maximum thrombus (intraluminal thrombus) thickness and maximum surface growth, as well as between peak wall stress (PWS) and surface growth, their colocalization was examined. RESULTS: The median average annual surface growth was 6% (0%-28%), and the maximum surface growth 24% (11%-238%). There was strong evidence of a moderate correlation between Dmax and average as well as maximum surface growth. Regarding volumes, there was strong evidence of a very strong association with average surface growth rate and a moderate association with maximum surface growth rate (rho: 0.91, P < 0.001; rho: 0.7, P < 0.001, respectively). In 51.6% of the follow-ups, maximum surface growth occurred away from Dmax site. Sixteen cases presented maximum surface growth away and fifteen at the region of maximum initial intraluminal thrombus thickness. AAAs in the former group had significantly thinner initial intraluminal thrombus thickness (11.3 vs 19.5 mm, P < 0.001) than those in the latter. Apart from a single case, maximum surface growth did not occur at the PWS region. CONCLUSIONS: More than half of the lesions display maximum growth away from Dmax, suggesting that a more accurate method of analyzing AAA growth needs to be established in clinical practice that will take into account local surface growth.

Correlation of Intraluminal Thrombus Deposition, Biomechanics, and Hemodynamics with Surface Growth and Rupture in Abdominal Aortic Aneurysm-Application in a Clinical Paradigm.

BACKGROUND: The natural history of abdominal aortic aneurysm (AAA) can be investigated through longitudinal evaluation of localized aneurysm characteristics exploiting clinical images. The major challenge is to identify corresponding regions between follow-ups. We have recently developed an algorithm (VascForm) based on nonrigid registration that can obtain surface correspondence and quantify surface growth distribution. METHODS: A ruptured AAA with an initial computed tomography scan 2 years ago was studied. Following 3-dimensional reconstruction of outer wall and luminal surfaces, the wall/thrombus thickness was obtained. Wall stress distribution was computed with finite element analysis, and computational fluid dynamics simulation was performed. VascForm was applied and allowed for the ruptured wall site to be traced back to the initial wall surface and be correlated with local initial intraluminal thrombus thickness, wall stress, and hemodynamic parameters. It also allowed for the quantification of wall surface growth based on surface element growth. RESULTS: Rupture occurred at the posterolateral side. Initial wall surface growth was in most regions 40%. However, a large section of the posterior wall presented 110% growth. Initial thrombus deposition was more prevalent anteriorly, and a posterior thrombus-free isle was present. Peak wall stress (initial and follow-up) occurred at AAA neck. Nonrigid registration revealed that rupture originated from the vicinity of the initial thrombus-free isle. Furthermore, rupture occurred at the wall region with the largest growth (110%). No clear correlation between hemodynamics and rupture site could be identified. CONCLUSIONS: High local surface growth correlates with rupture site and could therefore potentially become a marker of rupture risk. The ongoing application of this methodology to a large cohort of AAA patients will focus on identifying characteristic features of AAA regions that present high surface growth in follow-up evaluations, to assist in improved rupture risk estimation.

A robust approach for exploring hemodynamics and thrombus growth associations in abdominal aortic aneurysms.

Longitudinal studies of vascular diseases often need to establish correspondence between follow-up images, as the diseased regions may change shape over time. In addition, spatial data structures should be taken into account in the statistical analyses to avoid inferential errors. This study investigates the association between hemodynamics and thrombus growth in abdominal aortic aneurysms (AAAs) while emphasizing on the abovementioned methodological issues. Six AAA surfaces and their follow-ups were three-dimensionally reconstructed from computed-tomography images. AAA surfaces were mapped onto a rectangular grid which allowed identification of corresponding regions between follow-ups. Local thrombus thickness was measured at initial and follow-up surfaces and computational fluid dynamic simulations provided time-average wall shear stress (TAWSS), oscillatory shear index (OSI), and relative residence time. Six Bayesian regression models, which account for spatially correlated measurements, were employed to explore associations between hemodynamics and thrombus growth. Results suggest that spatial regression models based on TAWSS and OSI offer superior predictive performance for thrombus growth relative to alternative specifications. Ignoring the spatial data structure may lead to improper assessment with regard to predictor significance.

A novel approach for local abdominal aortic aneurysm growth quantification.

Although aneurysm size still remains the most accepted predictor of rupture risk, abdominal aortic aneurysms (AAAs) with maximum diameter smaller than 5 cm may also rupture. Growth rate is an additional marker for rupture risk as it potentially reflects an undesirable wall remodeling that leads to fast regional growth. Currently, an indication for surgery is an expansion rate >10 mm/year, measured as change in maximum diameter over time. However, as AAA expansion is non-uniform, it is questionable whether measurement of maximum diameter change over time can capture increased localized remodeling activity. A method for estimating AAA surface area growth is introduced, providing a better measure of local wall deformation. The proposed approach is based on the non-rigid iterative closest point algorithm. Optimization and validation is performed using 12 patient-specific AAA geometries artificially deformed to produce a target surface with known nodal displacements. Mesh density sensitivity, range of uncertainty, and method limitations are discussed. Application to ten AAA patient-specific follow-ups suggested that maximum diameter growth does not correlate strongly with the maximum surface growth (R 2 = 0.614), which is not always colocated with maximum diameter, or uniformly distributed. Surface growth quantification could reinforce the quality of aneurysm surveillance programs.

Deformation and distensibility distribution along the abdominal aorta in the presence of aneurysmal dilatation.

BACKGROUND: In order to evaluate the elastic behavior of the abdominal aortic aneurysm (AAA), the distribution of aortic deformation during the cardiac cycle is measured. Moreover, the distensibility of the AAA composite structure consisting of the AAA wall and the intraluminal thrombus (ILT), as well as that of the adjacent non-aneurysmal aortic segment (NAA), are calculated. METHODS: Ten patients underwent electrocardiographically-gated computed tomography. 3D-surfaces of aortic wall and lumen were reconstructed during peak-systole and end-diastole and cross-sections perpendicular to the centerline were extracted 1 mm apart. Comparison of cross-sectional areas between peak-systole and end-diastole provided the relative area change (RAC). Mean values were calculated for NAA (RACNAA), aneurysmal wall (RACWall), and aneurysmal lumen (RACLumen). Distensibility of aneurysmal and unaffected aorta was calculated using brachial blood pressure measurements (DAAA and DNAA respectively). Normalized distensibility (DNORM) of the AAA was calculated with respect to normal aortic segment distensibility and related to aneurysm size and thrombus content. RESULTS: A map of aortic deformation during the cardiac cycle was obtained. Differences between RACWall (median=0.7%, range=0.3-2.1%) and both RACNAA (median=2.8%, range=0.9-4.8%) and RACLumen (median=1.8%, range=0.5-3.4%) were statistically significant. DAAA (median=0.30∙10-5 Pa-1, range=0.05-0.64∙10-5 Pa-1) was lower than DNAA (median=0.43∙10-5 Pa-1, range=0.16-0.83∙10-5 Pa-1) but difference was not statistically significant. Median DNORM was 0.73 (range=0.1-3.1) and presented a significant positive correlation with AAA size and thrombus content. CONCLUSIONS: Aneurysmal wall deforms significantly less than non-aneurysmal wall and aneurysmal lumen, due to altered elastic properties and reduced loading. In large AAAs with larger amounts of ILT, the lumen deformation is comparable or even exceeds that of NAA and subsequently so does the distensibility of the Wall-ILT composite, an observation suggesting a thrombus cushioning effect. DNORM may provide insight in the estimation of AAA evolution and assist in rupture risk assessment.

Routine use of an aortic balloon to resolve possible inflow stenosis induced by the inflatable ring fixation mechanism of the Ovation endograft.

PURPOSE: To investigate if the routine use of an aortic balloon within 15-30 min after Ovation stent graft ring inflation would resolve any inflow stenosis, which may reach 60 %, at the level of the sealing rings. Moreover, we estimated the potential hemodynamic compromise in these patients during rest and exercise. METHODS: Following 3-dimensional reconstruction of AAA models, cross-sectional area of the infrarenal aorta just proximal the sealing mechanism (A aort, R aort, respectively) and internal area at the site of stenosis (A int, R int, respectively) were measured for 83. Forty-nine patients were managed without and 34 with an aortic balloon use. Pressure drop during rest and exercise was estimated. RESULTS: Technical success was 98 % and there were no perioperative deaths, one type-I endoleak, and 12 (14.5 %) type-II endoleaks. Median A int and R int were significantly reduced compared to A aort [55 % reduction, 143 (range 28-380) mm2 vs 314 (range 177-531) mm2, P value <0.001] and R aort [42 % reduction, 6.75 (range 3-11) mm vs 10 (range 7.5-13) mm, P value <0.001]. The observed stenosis was significantly less for patients in whom an aortic balloon was used intraoperatively (area reduction 36 vs 59 %, P value = 0.009). This stenosis caused a statistically significant, but clinically insignificant ΔP in both groups during rest (0.13 vs 0.06 mmHg, P value = 0.02) and exercise (1 vs 0.5 mmHg, P value = 0.02). CONCLUSION: The advantages of the unique sealing mechanism of the Ovation device seem to be accompanied by an inflow stenosis which is significantly reduced when neck molding with an aortic balloon is used. Overall, the hemodynamic impact of this abnormality seems to be clinically insignificant at 1-month follow-up.

Effect of intraluminal thrombus asymmetrical deposition on abdominal aortic aneurysm growth rate.

PURPOSE: To determine the relationship between asymmetrical intraluminal thrombus (ILT) deposition in abdominal aortic aneurysm (AAA) and growth rate and to explore its biomechanical perspective. METHODS: Thirty-four patients with AAA underwent at least 2 computed tomography scans during surveillance. The volumes of the AAA (VAAA) and thrombus (VILT) and the maximum thrombus thickness (ILTthick) were computed. Thrombus distribution was evaluated by introducing the asymmetrical thrombus deposition index (ATDI), with positive and negative values (-1

The influence of intraluminal thrombus on noninvasive abdominal aortic aneurysm wall distensibility measurement.

Abdominal aortic aneurysm wall distensibility can be estimated by measuring pulse pressure and the corresponding sac volume change, which can be obtained by measuring wall displacement. This approach, however, may introduce error if the role of thrombus in assisting the wall in bearing the pulse pressure loading is neglected. Our aim was to introduce a methodology for evaluating and potentially correcting this error in estimating distensibility. Electrocardiogram-gated computed tomography images of eleven patients were obtained, and the volume change between diastole and systole was measured. Using finite element procedures, we determined the equivalent pulse pressure loading that should be applied to the wall of a model where thrombus was digitally removed, to yield the same sac volumetric increase caused by applying the luminal pulse pressure to the model with thrombus. The equivalent instead of the measured pulse pressure was used in the distensibility expression. For a relative volumetric thrombus deposition (V ILT) of 50 %, a 62 % distensibility underestimation resulted when thrombus role was neglected. A strong linear correlation was observed between distensibility underestimation and V ILT. To assess the potential value of noninvasive wall distensibility measurement in rupture risk stratification, the role of thrombus on wall loading should be further investigated.

Advancements in identifying biomechanical determinants for abdominal aortic aneurysm rupture.

Abdominal aortic aneurysms are a common health problem and currently the need for surgical intervention is determined based on maximum diameter and growth rate criteria. Since these universal variables often fail to predict accurately every abdominal aortic aneurysms evolution, there is a considerable effort in the literature for other markers to be identified towards individualized rupture risk estimations and growth rate predictions. To this effort, biomechanical tools have been extensively used since abdominal aortic aneurysm rupture is in fact a material failure of the diseased arterial wall to compensate the stress acting on it. The peak wall stress, the role of the unique geometry of every individual abdominal aortic aneurysm as well as the mechanical properties and the local strength of the degenerated aneurysmal wall, all confer to rupture risk. In this review article, the assessment of these variables through mechanical testing, advanced imaging and computational modeling is reviewed and the clinical perspective is discussed.

Graft inflow stenosis induced by the inflatable ring fixation mechanism of the Ovation stent-graft system: hemodynamic and clinical implications.

PURPOSE: To investigate the observed inflow stenosis at the O-rings of the Ovation stent-graft and evaluate its hemodynamic and clinical impact. METHODS: The study involved 49 consecutive patients (48 men; mean age 71.2 ± 7.7 years) treated successfully with the Ovation abdominal aortic stent-graft between June 2011 and January 2014 at a single center. Cross-sectional area and radius measurements of the infrarenal aorta just proximal to the sealing mechanism, as well at the site of stenosis, were measured from 3D reconstructions of the 1-month postoperative computed tomographic angiograms. Based on Poiseuille's law, the predicted pressure drop was calculated for each patient based on the length of the stenosis. Invasive blood pressure measurements at 3 levels (proximal to the inflatable rings, halfway inside the stenosis, and distal to the stenosis) were obtained in 10 patients intraoperatively. Ankle-brachial index (ABI) values preoperatively were compared to those after the procedure for all patients to assess the clinical impact of this phenomenon. RESULTS: Median internal cross-sectional area at the site of the stenosis was significantly reduced compared to the area just proximal to the O-rings [57% reduction: 123 mm(2) (range 28-254) vs. 283 mm(2) (range 177-531), respectively; p<0.001]. The same was observed for the radius [6.5 mm (range 3-9) vs. 9.5 mm (range 7.5-13), respectively; p<0.001]. Based on the median 15 mm length of the stenosis (range 13-17) observed in the study population, a median pressure drop of 0.13 mmHg (range 0-0.25) along the stenosis was calculated. Invasive blood pressure measurements indicated a non-significant pressure change along the stenosis (e.g., 0.7 mmHg between the proximal level and halfway inside the stenosis). ABI remained practically unchanged postoperatively. CONCLUSION: The advantages of the Ovation device's unique sealing mechanism come at the expense of a median area inflow stenosis of ∼ 60%. This stenosis does not cause a hemodynamically significant pressure drop. Future modification of the graft ring design may be needed in order to reduce this stenosis.

Value of volume measurements in evaluating abdominal aortic aneurysms growth rate and need for surgical treatment.

PURPOSE: To examine whether indices other than the traditionally used abdominal aortic aneurysm (AAA) maximum diameter, such as AAA volume, intraluminal thrombus (ILT) thickness and ILT volume, may be superior to evaluate aneurismal enlargement. MATERIALS AND METHODS: Thirty-four small AAAs (initially presenting a maximum diameter <5.5cm which is the threshold for surgical repair) with an initial and a follow-up CT were examined. Median increase and percentile annual change of these variables was calculated. Correlation between growth rates as determined by the new indices under evaluation and those of maximum diameter were assessed. AAAs were divided according to outcome (surveillance vs. elective repair after follow-up which is based on the maximum diameter criterion) and according to growth rate (high vs. low) based on four indices. Contingency between groups of high/low growth rate regarding each of the four indices on one hand and those regarding need for surgical repair on the other was assessed. RESULTS: A strong correlation between growth rates of maximum diameter and those of AAA and ILT volumes could be established. Evaluation of contingency between groups of outcome and those of growth rate revealed significant associations only for AAA and ILT volumes. Subsequently AAAs with a rapid volumetric increase over time had a likelihood ratio of 10 to be operated compared to those with a slower enlargement. Regarding increase of maximum diameter, likelihood ratio between AAAs with rapid and those with slow expansion was only 3. CONCLUSION: Growth rate of aneurysms regarding 3Dimensional indices of AAA and ILT volumes is significantly associated with the need for surgical intervention while the same does not hold for growth rates determined by 2Dimensional indices of maximum diameter and ILT thickness.

A comparative review of the hemodynamics and pathogenesis of cerebral and abdominal aortic aneurysms: lessons to learn from each other.

OBJECTIVE: Cerebral aneurysms (CAs) and abdominal aortic aneurysms (AAAs) are degenerative vascular pathologies that manifest as abnormal dilations of the arterial wall. They arise with different morphologies in different types of blood vessels under different hemodynamic conditions. Although treated as different pathologies, we examine common pathways in their hemodynamic pathogenesis in order to elucidate mechanisms of formation. MATERIALS AND METHODS: A systematic review of the literature was performed. Current concepts on pathogenesis and hemodynamics were collected and compared. RESULTS: CAs arise as saccular dilations on the cerebral arteries of the circle of Willis under high blood flow, high wall shear stress (WSS), and high wall shear stress gradient (WSSG) conditions. AAAs arise as fusiform dilations on the infrarenal aorta under low blood flow, low, oscillating WSS, and high WSSG conditions. While at opposite ends of the WSS spectrum, they share high WSSG, a critical factor in arterial remodeling. This alone may not be enough to initiate aneurysm formation, but may ignite a cascade of downstream events that leads to aneurysm development. Despite differences in morphology and the structure, CAs and AAAs share many histopathological and biomechanical characteristics. Endothelial cell damage, loss of elastin, and smooth muscle cell loss are universal findings in CAs and AAAs. Increased matrix metalloproteinases and other proteinases, reactive oxygen species, and inflammation also contribute to the pathogenesis of both aneurysms. CONCLUSION: Our review revealed similar pathways in seemingly different pathologies. We also highlight the need for cross-disciplinary studies to aid in finding similarities between pathologies.

Changes in geometric configuration and biomechanical parameters of a rapidly growing abdominal aortic aneurysm may provide insight in aneurysms natural history and rupture risk.

BACKGROUND: Abdominal aortic aneurysms (AAA) are currently being treated based on the maximum diameter criterion which has often been proven insufficient to determine rupture risk in case of every AAA. We analyzed a rare case of an AAA which presented an extremely fast growth focusing on biomechanical determinants that may indicate a high risk profile. The examination of such a case is expected to motivate future research towards patient-specific rupture risk estimations. METHODS: An initially small AAA (maximum diameter: 4.5 cm) was followed-up and presented a growth of 1 cm in only 6-months of surveillance becoming suitable for surgical repair. Changes of morphometric characteristics regarding AAA, thrombus and lumen volumes, cross-sectional areas, thrombus maximum thickness and eccentricity, and maximum centerline curvature were recorded. Moreover biomechanical variables concerning Peak Wall Stress, AAA surface area exposed to high stress and redistribution of stress during follow-up were also assessed. RESULTS: Total aneurysm volume increased from 85 to 120 ml which regarded thrombus deposition since lumen volume remained stable. Thrombus deposition was eccentric regarding anterior AAA segment while its thickness increased from 0.3 cm to 1.6 cm. Moreover there was an anterior bulging over time as depicted by an increase in maximum centerline curvature from 0.4 cm-1 to 0.5 cm-1. Peak Wall Stress (PWS) exerted on aneurysm wall did not change significantly over time, slightly decreasing from 22 N/cm2 to 21 N/cm2. At the same time the area under high wall stress remained practically constant (9.9 cm2 at initial vs 9.7 cm2 at final examination) but there was a marked redistribution of wall stress against the posterior aneurysmal wall over time. CONCLUSION: Aneurysm area under high stress and redistribution of stress against the posterior wall due to changes in geometric configuration and thrombus deposition over time may have implications to aneurysms natural history and rupture risk.

Discrepancies in determination of abdominal aortic aneurysms maximum diameter and growth rate, using axial and orhtogonal computed tomography measurements.

PURPOSE: Maximum diameter and growth rate of abdominal aortic aneurysms (AAAs) which are currently used as the only variables to set the indication for elective repair are recorded through computed tomography (CT) measurements on an axial plane or on an orthogonal plane that is perpendicular to vessel centerline, interchangeably. We will attempt to record possible discrepancies between the two methods, identify whether such differences could influence therapeutic decisions and determine in which cases this should be expected. MATERIALS AND METHODS: We retrospectively reviewed sixty CT-scans performed in thirty-nine patients. Three-dimensional reconstruction of AAAs has been performed and differences in maximum diameter measured on axial and orthogonal planes were recorded. A measure for asymmetry was introduced termed ShapeIndex defined as the value of section minor over major axis and was related with differences in maximum diameter recordings. Growth rates were also determined using both axial and orthogonal measurements. RESULTS: Axial measurements overestimate maximum diameter by 2 ± 2.7 mm (P<0.001) with a range of 0-12.3mm. Overall, 20% of the CTs had an axial maximum diameter >5.5 cm indicating the need for intervention whereas, orthogonal diameter was below that threshold. Asymmetry of the axial sections with ShapeIndex≤0.8 was found to be related to an overestimation of maximum diameter by >5mm. There were no significant differences in growth rates when determined using orthogonal or axial measurements in both examinations (median growth rate: 2.3mm and 3.3mm respectively P=0.2). However there were significant differences when orthogonal measurements were used at initial and axial measurements used at follow-up examination or vice versa (median growth rate: 4.9 mm and 0.9 mm respectively P<0.001). CONCLUSIONS: Although the mean difference between measurements is low there is a wide range among cases, mainly observed in asymmetrical AAAs. ShapeIndex may identify those which are more likely to be misestimated. CT measurements performed to establish AAA growth rates should consistently use either the axial or orthogonal technique to avoid inaccuracies from occurring.

Estimation of wall properties and wall strength of aortic aneurysms using modern imaging techniques. One more step towards a patient-specific assessment of aneurysm rupture risk.

Abdominal aortic aneurysmal disease is a major health problem with rupture representing its main complication accompanied by great mortality. Elective repair is currently performed with mortality rates <3%, based upon size or expansion rate, with a recommended threshold of 5.5 cm maximum diameter or >1cm/year enlargement. It is well established that even small AAAs without indication for surgical repair can experience rupture with catastrophic outcomes whereas larger aneurysms often remain intact for a long period. It is recognized, therefore, that the currently used, maximum diameter criterion can not accurately predict AAAs evolution. There is increasing interest in the role of patient-specific biomechanical profiling of AAA development and rupture. Biomechanically, rupture of a vessel occurs when intravascular forces exceed vessel wall structural endurance. Peak Wall Stress (PWS) has been previously shown to better identify AAAs prone to rupture than maximum diameter, but currently stress analysis takes into account several assumptions that influence results to a large extent and limit their use. Moreover stress represents only one of two determinants of rupture risk according to the biomechanical perspective. Wall strength and mechanical properties on the other hand cannot be assessed in vivo but only ex vivo through mechanical studies with mean values of these parameters taken into account for rupture risk estimations. New possibilities in the field of aortic imaging offer promising tools for the validation and advancement of stress analysis and the in vivo evaluation of AAAs' wall properties and wall strength. Documentation of aortic wall motion during cardiac cycle is now feasible through ECG-gated multi-detector CT imaging offering new possibilities towards an individualized method for rupture risk and expansion-rate predictions based on data acquired in vivo.

Progressive aneurysm development following hemodynamic insult.

OBJECT: Hemodynamic insult has been speculated to be a key factor in intracranial aneurysm formation; however, it is unclear whether a sustained insult is necessary. The authors examined whether aneurysmal degradation would continue despite the normalization of wall shear stress (WSS) by adaptive outward vascular remodeling. METHODS: Twenty-five rabbits underwent either sham operation (5 animals) or bilateral common carotid artery ligation (20 animals) to augment basilar artery (BA) flow. Basilar termini (BTs) were harvested at 5 days and 3, 12, and 27 weeks postoperation. Histological changes at the BTs were quantified using an aneurysm development score (ADS) wherein the luminal length of the vessel wall exhibiting internal elastic lamina (IEL) loss, media thinning (> 30% media loss), and bulging was multiplied by the percentage of media thinning divided by the BA diameter. This score and its component variables were evaluated over the specified time points and compared with the WSS time course obtained from multiple angiography and BA flow velocity measurements. RESULTS: Serial examination of histological sections from the ligation group (17 rabbits survived the procedure) demonstrated localized, progressive, degenerative, and aneurysmal changes at the BTs. Prominent IEL loss was observed in BT specimens from all ligated animals. Media thinning and luminal bulging significantly progressed over the 27-week follow-up. The composite ADS significantly increased over the study period, indicating progressive aneurysm development, although the WSS returned to preligation baseline values within 5 weeks of ligation. CONCLUSIONS: Hemodynamic insult can elicit a pathological vascular response leading to a self-sustaining aneurysmal remodeling that does not require persistence of the original inciting factor to continue its pathological progression.

Characterization of critical hemodynamics contributing to aneurysmal remodeling at the basilar terminus in a rabbit model.

BACKGROUND AND PURPOSE: Hemodynamic insult by bilateral common carotid artery ligation has been shown to induce aneurysmal remodeling at the basilar terminus in a rabbit model. To characterize critical hemodynamics that initiate this remodeling, we applied a novel hemodynamics-histology comapping technique. METHODS: Eight rabbits received bilateral common carotid artery ligation to increase basilar artery flow. Three underwent sham operations. Hemodynamic insult at the basilar terminus was assessed by computational fluid dynamics. Bifurcation tissue was harvested on day 5; histology was comapped with initial postligation hemodynamic fields of wall shear stress (WSS) and WSS gradient. RESULTS: All bifurcations showed internal elastic lamina loss in periapical regions exposed to accelerating flow with high WSS and positive WSS gradient. Internal elastic lamina damage happened 100% of the time at locations where WSS was >122 Pa and WSS gradient was >530 Pa/mm. The degree of destructive remodeling accounting for internal elastic lamina loss, medial thinning, and luminal bulging correlated with the magnitude of the hemodynamic insult. CONCLUSIONS: Aneurysmal remodeling initiates when local hemodynamic forces exceed specific limits at the rabbit basilar terminus. A combination of high WSS and positive WSS gradient represents dangerous hemodynamics likely to induce aneurysmal remodeling.