Safety of stationary grinding machines - impact resistance of work zone enclosures.

Guards on machine tools are intended to protect persons from being injured by parts ejected with high kinetic energy from the work zone of the machine. Stationary grinding machines are a typical example. Generally such machines are provided with abrasive product guards closely enveloping the grinding wheel. However, many machining tasks do not allow the use of abrasive product guards. In such cases, the work zone enclosure has to be dimensioned so that, in case of failure, grinding wheel fragments remain inside the machine's working zone. To obtain data for the dimensioning of work zone enclosures on stationary grinding machines, which must be operated without an abrasive product guard, burst tests were conducted with vitrified grinding wheels. The studies show that, contrary to widely held opinion, narrower grinding wheels can be more critical concerning the impact resistance than wider wheels although their fragment energy is smaller.

Slipping on pedestrian surfaces: methods for measuring and evaluating the slip resistance.

Tripping, slipping and falling accidents are among the types of accident with a high incidence. This article describes the requirements concerning slip resistance, as well as the state of the art of slip resistance measurement standards in the European Community and the USA. The article also describes how risk assessment can be performed in the field.

Impact resistance of guards on grinding machines.

Guards on machine tools are meant to protect persons from injuries caused by parts ejected with high kinetic energy from the machine's working zone. With respect to stationary grinding machines, Standard No. EN 13218:2002, therefore, specifies minimum wall thicknesses for guards. These values are mainly based on estimations and experience instead of systematic experimental investigations. This paper shows to what extent simple impact tests with standardizable projectiles can be used as basis for the evaluation of the impact resistance of guards, provided that not only the kinetic energy of the projectiles used but also, among others, their geometry corresponds to the abrasive product fragments to be expected.

Safeguarding crushing points by limitation of forces.

Limitation of forces can be a simple measure to safeguard crushing points at doors, machines, and vehicles. In this connection different standards define a threshold force value of 150 N. This widely accepted value refers to static forces only. The dynamic forces that arise from impact on a person are frequently ignored, although they are generally higher than the static forces. The article describes an instrument for the measurement of static and dynamic crushing forces. This instrument has a stiffness that approximates the average stiffness of human fingers as one of the most at-risk parts of the human body with regard to crushing injuries. Sensory tests were carried out to define dynamic forces considered admissible at crushing points.