RESUMO
Herein, we report our analysis of the surface modification of polystyrene (PS) when treated under ambient conditions with a common biological buffer such as phosphate buffered saline (PBS) or aqueous solutions of the ionic constituents of PBS. Attenuated total reflection Fourier transform infrared spectroscopy was used for the analysis because the resultant spectra are very sensitive to minor changes in the chemical and structural properties of PS films. In addition, ultraviolet-visible spectroscopy was applied to characterize the surface modifications of PS. Treatment with PBS resulted in the most significant chemical and structural surface modifications of the PS films, as compared with each of the solutions of the constituents of PBS, which were tested separately. A multistep mechanism for the wet modification of PS is discussed. We postulate that the observed surface modifications are the result of photo-oxidation/reduction, swelling, and conformational changes and re-arrangement of the polymer chain. The resultant surface modifications could be similar to those produced by commonly used dry processes such as plasma treatments and electron, ion or ultraviolet irradiation. We found that the modifications that occurred in PBS were more stable than those initiated by dry processes. The formation of active groups on the surface of PS can be controlled by adsorption of bovine serum albumin or thermal annealing of PS before PBS treatment. This approach provides a simple and efficient method for the surface modification of PS for biomedical applications.
Assuntos
Poliestirenos/química , Adsorção , Animais , Soluções Tampão , Temperatura Alta , Soroalbumina Bovina/química , Soluções/química , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de Superfície , Água/químicaRESUMO
DC-magnetron sputtering with an Ag target on textile surfaces produced Ag particles with sizes approximately 4.7 nm (+/-15%). Sputtering for 15 s led to Ag layers of 15-20 nm. The threshold sputtering time precluding airborne bacterial growth was about 60 s. In this case, the coating was approximately 40-50 nm thick and the cotton Ag loading was 0.0026 wt %. The Ag particle size did not vary significantly with sputtering time between 15 and 600 s. Only coatings above this thickness lead to bacterial inactivation. Ag/Pt targets with sputtering times<60 s did not increase the bactericide performance of the Ag cotton samples with respect to sputtering from an Ag target alone, as expected from the position of Pt respect to Ag in the electrochemical series (Galvanic effect). The Ag cotton deposition led to very thin metallic semitransparent gray color coatings. X-ray of the Ag cotton suggested the presence of amorphous and crystalline Ag species. By X-ray photoelectron spectroscopy (XPS), it was found that the amount of oxidized silver species on the cotton was similar for sputtering times of 60 and 600 s, but the total amount of Ag deposited was almost two times higher after 600 s sputtering. This suggests that the positive silver-ions were located mainly at the silver interface. The type of silver ions produced using the Ag/Pt sputtering was determined to be very similar at 15, 60, and 600 s with the silver ions produced with the Ag target. This explains the lack of an increased inhibitory effect of Pt during the inactivation of airborne bacteria when present in the Pt/Ag target with respect to the Ag target, because in both cases similar silver ionic species were found.
Assuntos
Antibacterianos/química , Bactérias/crescimento & desenvolvimento , Fibra de Algodão , Viabilidade Microbiana , Prata/química , Bactérias/ultraestruturaRESUMO
The efficiency of a pre-absorbed bovine serum albumin (BSA) layer in blocking the non-specific adsorption of different proteins on hydrophobic and hydrophilic surfaces was evaluated qualitatively and quantitatively using infrared reflection spectroscopy supported by spectral simulations. A BSA layer with a surface coverage of 35% of a close-packed monolayer exhibited a blocking efficiency of 90-100% on a hydrophobic and 68-100% on a hydrophilic surface, with respect to the non-specific adsorption of concanavalin A (Con A), immunoglobulin G (IgG), and staphylococcal protein A (SpA). This BSA layer was produced using a solution concentration of 1 mg/mL and 30 min incubation time. BSA layers that were adsorbed at conditions commonly employed for blocking (a 12 h incubation time and a solution concentration of 10 mg/mL) exhibited a blocking activity that involved competitive adsorption-desorption. This activity resulted from the formation of BSA-phosphate surface complexes, which correlated with the conformation of adsorbed BSA molecules that was favourable for blocking. The importance of optimisation of the adsorbed BSA layer for different surfaces and proteins to achieve efficient blocking was addressed in this study.
Assuntos
Soroalbumina Bovina/química , Água/química , Adsorção , Animais , Bovinos , Interações Hidrofóbicas e Hidrofílicas , Proteínas/antagonistas & inibidores , Proteínas/química , Soroalbumina Bovina/metabolismoRESUMO
We studied the adsorption of bovine serum albumin (BSA) from phosphate-buffered saline (pH 7.4) to hydrophilic and hydrophobic surfaces. Attenuated total reflection Fourier transform infrared spectroscopy, supported by spectral simulation, allowed us to determine with high precision the amount of BSA adsorbed (surface coverage) and its structural composition. The adsorbed BSA molecules had an alpha-helical structure on both hydrophobic and hydrophilic surfaces but had different molecular conformations and adsorption strengths on the two types of surface. Adsorption of BSA was saturated at around 50% surface coverage on the hydrophobic surface, whereas on the hydrophilic surface the adsorption reached 95%. The BSA molecules adsorbed to the hydrophilic surface with a higher interaction strength than to the hydrophobic surface. Very little adsorbed BSA could be desorbed from the hydrophilic surface, even using 0.1 M sodium dodecyl sulfate, a strong detergent solution. The formation of BSA-phosphate surface complexes was observed under different BSA adsorption conditions on hydrophobic and hydrophilic surfaces. The formation of these complexes correlated with the more efficient blocking of nonspecific interactions by the adsorbed BSA layer. Results from the molecular modeling of BSA interactions with hydrophobic and hydrophilic surfaces support the spectroscopic findings.
Assuntos
Interações Hidrofóbicas e Hidrofílicas , Soroalbumina Bovina/química , Adsorção , Animais , Bovinos , Germânio/química , Modelos Moleculares , Poliestirenos/química , Conformação Proteica , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Innovative pretreatment by UVC light (185 nm) and by radio-frequency (RF) plasma at atmospheric pressure to functionalize the Nylon surface, increasing its bondability toward TiO(2), is reported in this study. In the case of UVC light pretreatment in air, the molar absorption coefficient of O(2)/N(2) at 185 nm is very low and the air in the chamber absorbs very little light from the UVC source before reaching the Nylon sample. Nylon fabrics under RF plasma were also functionalized at atmospheric pressure because of the marked heating effect introduced in the Nylon by the RF plasma. This effect leads to intermolecular bond breaking and oxygenated surface groups in the topmost Nylon layers. Both pretreatments enhanced significantly the photocatalytic discoloration of the red-wine stain in Nylon-TiO(2) compared with samples without pretreatment. The UVC and RF methods in the absence of vacuum imply a considerable cost reduction to functionalize textile surfaces, suggesting a potential industrial application. Red-wine-stain discoloration under simulated sunlight was monitored quantitatively by diffuse-reflectance spectroscopy and by CO(2) evolution. X-ray photoelectron spectroscopy (XPS) was used to monitor the changes of the C, N, and S species on the Nylon topmost layers during the discoloration process. Significant changes in the XPS spectra of Ti 2p peaks were observed during discoloration of the wine spots. Wine stains attenuated the signal of the Ti 2p (458.4 eV) peak in the Nylon-TiO(2)-stained wine sample at time zero (from now on, the time before the discoloration process). Furthermore, a decrease of the wine-related O 1s signal at 529.7 eV and N 1s signal at 399.5 eV was observed during the discoloration process, indicating an efficient catalytic decomposition of the wine pigment on Nylon-TiO(2). X-ray diffraction detected the formation of anatase on the Nylon fibers. High-resolution transmission electron microscopy shows the formation of anatase particles with sizes between 8 and 20 nm.
RESUMO
An innovative way to fix preformed nanocrystalline TiO(2) on low-density polyethylene film (LDPE-TiO(2)) is presented. The LDPE-TiO(2) film was able to mediate the complete photodiscoloration of Orange II using about seven times less catalyst than a TiO(2) suspension and proceeded with a photonic efficiency of approximately 0.02. The catalyst shows photostability over long operational periods during the photodiscoloration of the azo dye Orange II. The LDPE-TiO(2) catalyst leads to full dye discoloration under simulated solar light but only to a 30% TOC reduction since long-lived intermediates generated in solution seem to preclude full mineralization of the dye. Physical insight is provided into the mechanism of stabilization of the LDPE-TiO(2) composite during the photocatalytic process by X-ray photoelectron spectroscopy (XPS). The adherence of TiO(2) on LDPE is investigated by electron microscopy (EM) and atomic force microscopy (AFM). The thickness of the TiO(2) film is seen to vary between 1.25 and 1.69 microm for an unused LDPE-TiO(2) film and between 1.31 and 1.50 microm for a sample irradiated 10h during Orange II discoloration pointing out to a higher compactness of the TiO(2) film after the photocatalysis.
Assuntos
Fotólise , Fármacos Fotossensibilizantes/química , Polietileno/química , Titânio/química , Compostos Azo/química , Benzenossulfonatos/química , Catálise , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Fatores de TempoRESUMO
A new type of Nafion/Fe structured membrane ensuring faster kinetics, higher efficiency, and mechanical properties has been prepared and will be compared in its performance with the Fe-exchanged commercial Dupont 117 Nafion/Fe membrane during the abatement of model organic compounds. During the casting of the laboratory Nafion sample, the iron ions were introduced directly into the Nafion oligomer solution. This novel laboratory Nafion/Fe was tested as an immobilized catalyst in the degradation of several toxic pollutants showing a faster photoassisted degradation kinetics and a wider effective photocatalytic pH range compared to the Fe-exchanged commercial Dupont 117 Nafion/Fe membrane. When carrying out Ar ion sputtering of the 50 topmost catalyst layers, evidence is presented by X-ray photoelectron spectroscopy that Fe ions are found in the inner Nafion layers and seem to be responsible for the immobilized photoassisted Fenton processes leading to the degradation of 4-chorophenol (4-CP) taken as a model organic pollutant for the degradation process reported in this study. In the laboratory sample, the iron oxy/hydroxy Nafion moiety undergoes a transition to a more stable Nafion/Fe species during 4-CP degradation as determined by X-ray diffraction. This more stable form shows a higher iron dispersion and crystallinity compared to the fresh sample and is stabilized by the Nafion matrix avoiding the formation of separate iron phases. By infrared absorption (Fourier transform infrared), evidence is presented for the band of akaganeite-like species at 870 cm(-1) on the laboratory Nafion/Fe sample. This band disappears after 4-CP degradation because of the formation of the more highly dispersed iron species. Sputtering experiments show a decrease of F-containing groups in the laboratory Nafion/Fe samples closer to the catalyst upper layer while the amounts of Fe, C, and in particular O species increase in the topmost layer(s). In particular, the oxygenated species develop in the Nafion/Fe up to approximately 50 A below the catalyst surface. These species remain stable during the long-term Nafion/Fe degradation of 4-CP. Dynamo-mechanical analysis performed on laboratory Nafion/ Fe membrane samples revealed that these membranes possessed a greater mechanical modulus and resistance than the commercial Dupont 117 Nafion membrane.