Lignocellulosic biomass fertilizers: Production, characterization, and agri-applications.

The growing focus on sustainable agriculture and optimal resource utilization has spurred investigations into lignocellulosic biomass as a potential source for producing environmentally friendly fertilizers. This paper reviews recent advancements in the production and application of innovative fertilizers derived from lignocellulose. It highlights potential in enhancing agricultural productivity and reducing environmental impacts such as carbon footprint and water pollution. The paper outlines various methods for conversion, highlighting the unique advantages of chemical, enzymatic, and microbiological processes, for converting lignocellulosic biomass into nutrient-rich fertilizers. The study compares the efficacy of lignocellulosic fertilizers to traditional fertilizers in promoting crop growth, enhancing soil health, and reducing nutrient losses. The results demonstrate the potential of lignocellulosic biomass-derived fertilizers in promoting resource efficiency and sustainable agriculture. While this research significantly contributes to the existing body of knowledge, further studies on long-term impacts and scalability are recommended for the development of innovative and sustainable agricultural practices.

Recent innovations in fertilization with treated digestate from food waste to recover nutrients for arid agricultural fields.

This study aims to explore the development of sustainable fertilizers from waste materials of a biogas plant and a brewery. These wastes, rich in organic carbon and nitrogen, were processed with sulfuric(VI) and phosphoric(V) acid mixture, facilitating the production of free amino acids and achieving waste sanitization. This treatment produced by-products, which extended the range of possible applications. The highest concentration of free amino acids (360 mg/l) was achieved through hydrolyzing with a 40% concentration medium over 24 h. In this case, the maximum levels were recorded for beta-alanine (69.3 mg/l), glycine (46.8 mg/l), isoleucine (43.5 mg/l), proline (36.2 mg/l), and valine (31.5 mg/l). The study presents two fertilizer technologies, with and without micronutrients, that satisfy European Parliament Regulation 2019/1009 (Ntot > 2%, Norg > 0.5%, Corg > 3%). Bioavailability of nutrients in the formulations ranged from 60 to 100%. The efficacies of these fertilizers were evaluated in 30-day pot trials with various plant species, with both single application and fertigation tested. Multielement analysis confirmed high nutrient transfer in the soil-plant system, and the inclusion of micronutrients led to biofortification of plant biomass in Cu (48.3 ± 7.2 mg/kg), Mn (249 ± 37 mg/kg), Zn (164 ± 25 mg/kg), and Fe (211 ± 32 mg/kg). These sustainable fertilizers present an alternative to traditional, non-renewable fertilizers and offer promising solutions for precision agriculture and environmentally conscious production.

Maximizing the potential of leachate from sewage sludge as a sustainable nutrients source to alleviate the fertilizer crisis.

Leachate from separate digesters in biological wastewater treatment plants contains valuable biogenic compounds that can serve as fertilizer nutrients. In this study, a method was developed to utilize leachate from sewage sludge dewatering as a raw material for the preparation of a plant conditioner, providing water, nutrients, and growth-stimulating amino acids. A chemical conditioning procedure (65% HNO3) was used to prepare the leachate solution for fertilization. The feasibility of producing an amino acid-based fertilizer using shrimp shells and inorganic acids (96% H2SO4 and 85% H3PO4) was also demonstrated. Microbiological analysis confirmed the safety of the formulations, and chelation of micronutrients with available amino acids was proven (up to 100% chelating degree). The bioavailability of all nutrients was confirmed through extraction tests (extraction in neutral ammonium citrate). Germination tests showed similar fresh plant masses to those with commercial preparations, demonstrating the effectiveness of the developed technology. This approach aligns with circular economy principles and sustainable development and contributes to mitigating the impacts of climate change.

Tannery waste as a renewable source of nitrogen for production of multicomponent fertilizers with biostimulating properties.

The studies presented in this work show that solid tannery waste-like shavings can be used as high-protein materials for fertilizer production following the concept of the circular economy. To select appropriate process parameters (mass ratio of shavings meal to the hydrolyzing agent (S:L), hydrolysis medium concentration, temperature) and to ensure the highest possible hydrolysis efficiency, it is useful to apply the well-known response surface methodology (RSM). The analyses revealed that chromium shavings (SCr) were most preferably treated with 10% KOH in a ratio of S:L 1:1 with the process being carried out at 160 °C (6.59% N). The optimal hydrolysis conditions for non-chromium (S) shavings were: S:L ratio 1:2, 10% H2SO4, and temperature 160 °C (4.08% N). Chromium concentrations in hydrolysates from S and SCr shavings obtained under optimal conditions were 15.2 mg/kg and 9483 mg/kg, respectively. Hydrolysate samples were analyzed by reversed-phase high-pressure liquid chromatography (RP-HPLC) that revealed that the type of hydrolysis (acidic/alkaline) affects the amino acid profile. Approximately 4.5 times more amino acids were extracted in the KOH environment than during acidic treatment. The hydrolysates contained mainly glycine, alanine, and proline, which are primarily responsible for stimulating plant growth by supporting chlorophyll synthesis, chelating micronutrients, improving pollen fertility, or resistance to low temperatures. The conversion of tannery waste into fertilizer requires the control of contaminant levels, especially chromium, which can oxidize to the carcinogenic form Cr(VI) that is hazardous to humans and the environment.

Innovative bio-waste-based multilayer hydrogel fertilizers as a new solution for precision agriculture.

The aim of the research work was to present a multilayer hydrogel capsule with controlled nutrient release properties as an innovative fertilizer designed for sustainable agriculture. Preparation of the capsules included the following steps: sorption of micronutrients (Cu, Mn, Zn) on eggshells (1) and their immobilization in sodium alginate, with the crosslinking agent being the NPK solution (2). The capsules were coated with an additional layer of a mixture of biopolymers (0.79% alginate, 0.24% carboxymethylcellulose and 8.07% starch)by means of dipping and spraying techniques. The biocomposites were characterized by limited (<10% within 100 h for the structures encapsulated by the dipping method) release of fertilizer ions (except for small K+ ions). The hydrogel fertilizer formulations were analyzed for physicochemical properties such as macro- and micronutrient content, surface morphology analysis, coating structure evaluation, mechanical properties, swelling and drying kinetics. High nutrient bioavailability was confirmed in vitro (extraction in water and neutral ammonium citrate). Germination and pot tests have revealed that the application of multicomponent hydrogel fertilizers increases the length of cucumber roots by 20%, compared to the commercial product.

Recent innovations in various methods of harmful gases conversion and its mechanism in poultry farms.

Poultry breeding takes place in intensive, high-production systems characterized by high animal density, which is a source of harmful emission of odorous volatile organic compounds (VOCs), ammonia (NH3), hydrogen sulfide (H2S) and greenhouse gases, which in turn sustain animal welfare. This study identified and examined the characteristics of chemical compounds emitted in intensive poultry farming (laying hens, broilers) and their toxicity, which led to recommending methods of deodorization. Emphasis was placed on the law relative to air purification in poultry farms. Various methods of air treatment in poultry farms have been described: the modification of animal diet to improve nutrient retention and decrease the amount of their excrement; chemical oxidation technologies (ozonation, photocatalysis, Fenton reaction); various types/brands of biofilters, bioscrubbers and membrane reactors. Numerous studies show that biofilters can reduce ammonia emissions by 51%, hydrogen sulfide by 80%, odors by 67%, while scrubbers brings down ammonia emissions by 77% and odors by 42%, and the application of UV light lowers ammonia emissions by 28%, hydrogen sulfide by 55%, odors by 69% and VOCs by 52%. The paper presents both the solutions currently used in poultry farming and those which are currently in the research and development phase and, as innovative solutions, could be implemented in the near future.

From hazardous waste to fertilizer: Recovery of high-value metals from smelter slags.

This work proposes a method to valorize lead slag for fertilizer purposes. The research concept was to selectively recover valuable microelements (Cu(II), Fe(II), Zn(II) in an amount of at least 0.2% m/v of each) by chemical leaching while retaining toxic elements in the slag (i.e. As and Pb). Among acids, hydroxides, salts and their mixtures tested for slag treatment, it was potassium hydrogen sulfate and ammonia liquor under strongly oxidizing conditions (in the presence of hydrogen peroxide) that proved to be the most effective leaching agents. Response Surface Methodology applied to optimize the slag leaching conditions set the most favorable process parameters (concentration of leaching agents, slag to reagent weight ratio, and temperature). As a result, the concentration of Cu(II) in the extract was 3751 mg/L (for ammonia liquor) and Fe(II) and Zn(II) concentrations in potassium hydrogen sulfate were 4738 mg/L and 6102 mg/L, respectively. To close the life cycle of the waste, immobilization in polyethylene and binding to cement were indicated as methods to manage the solid waste material after leaching. The mixed extracts rich in Cu(II), Fe(II) and Zn(II) ions were tested in germination tests on cucumber. No phytotoxic effect was observed, which raises the possibility of utilizing the solutions after chemical leaching of slag as an alternative source of micronutrients for the production of multicomponent fertilizers. The results are promising and fit in the assumptions of circular economy.

Biochar in environmental friendly fertilizers - Prospects of development products and technologies.

According to the circular economy concept, the production of fertilizers should be closed in a loop, which prevents excessive emissions and harmful effects to the environment. Biological wastes are problematic to collect and transport. They undergo a biological transformation that causes greenhouse gases emission and sanitary hazards. Biomass sources used for organic or organo-mineral fertilizers must be free of pathogens and rich in macro and microelements. Solid residues can be processed thermally. Biochar is a carbon produced by biomass pyrolysis without oxygen presence and has been used for many years to improve soil quality and enhance the efficiency of fertilization. There are many research works on the use of biochar in fertilization. This study is also extended by the latest developments and technologies from the patent database (recent year) and biochar-based fertilizers market. To the best of our knowledge, there is no such review currently available in scientific databases. Based on the collected data, the best method of biochar management was proposed - soil application. Biochar applied to soil has several advantages: it improves soil structure and its sorption capacity, enhances soil-nutrient retention and water-holding capacity, immobilizes contaminants from soil (sorption), reduces greenhouse gas emissions and soil nutrient leaching losses while stimulating the growth of a plant.

Biodegradation of pharmaceuticals in photobioreactors - a systematic literature review.

This work is a systematic review that reports state-of-the-art in removal of pharmaceuticals from water and wastewater by photosynthetic organisms in photobioreactors. The PRISMA protocol-based review of the most recent literature data from the last 10 years (2011-2021) was reported. Articles were searched by the combination of the following keywords: photobioreactor, pharmaceuticals, drugs, hormones, antibiotics, biodegradation, removal, wastewater treatment. The review focuses on original research papers (not reviews), collected in 3 scientific databases: Scopus, Web of Knowledge, PubMed. The review considered the following factors: type of microorganisms, type of micropollutants removed, degradation efficiency and associated products, types of photosynthetic organisms and photobioreactor types. The conclusion from the systematic review is that the main factors that limit widespread pharmaceuticals removal in photobioreactors are high costs and the problem of low efficiency related with low concentrations of pharmaceuticals. The review indicated a need for further research in this area due to increasing amounts of metabolites in the food chain, such as p-aminophenol and estrone, which can cause harm to people and ichthyofauna. Pharmaceuticals removal can be improved by adapting the type of microorganism used to the type of contamination and implementing photoperiods, which increase the removal efficiency of e.g. sulfamethazine by up to 28%. In the future, it is necessary to search for new solutions in terms of the construction of photobioreactors, as well as for more effective species in terms of pharmaceuticals biodegradation that can survive the competition with other strains during water and wastewater treatment.

Tannery waste-derived biochar as a carrier of micronutrients essential to plants.

The leather tannery industry generates about 33 Mt/year of solid waste with different properties, turning its management into a challenge. One of the valorization methods of tannery wastes is the production of biochar by pyrolysis of leather scratches. Biochar's sorption properties and its high nitrogen content (10%) make it suitable for its application as a soil conditioner or carrier of microelements for fertilizers. The paper presents an innovative spray method to enrich biochar with cationic micronutrients: Cu, Mn, Zn. Enriched biochar contained 1095 mg/kg Cu(II), 1334 mg/kg Mn(II) and 1205 mg/kg Zn(II). The high bioavailability of nutrients and the effectiveness of the new fertilizer were demonstrated in extraction in vitro tests - the analysis of leachability of elements to water and bioavailability of micro-nutrients. The functional properties of enriched biochar were examined in vivo (germination, pot) tests. A high biomass increase (approximately 10%) was observed compared to the group fertilized with a commercial product. The proposed solution benefits the environment in that it is made from alternative resources from which innovative fertilizers are produced according to the circular economy concept.

Valorization of poultry slaughterhouse waste for fertilizer purposes as an alternative for thermal utilization methods.

Slaughterhouse waste and dead animals are mainly disposed of by incineration, which generates greenhouse gases and NOx. These wastes are a source of nutrients that can be recovered by circular economy techniques if material recycling is given a priority over energy recovery. To valorize high-protein animal waste (containing bones, meat, feather) for fertilizer purposes, the waste was processed by acid solubilization and neutralized with potassium hydroxide solution, which yielded a liquid fertilizer with plant growth biostimulating properties (due to the amino acids presence). The composition analysis showed that new fertilizers met all quality requirements set by the law, contain ~0.5% m/m amino acids and are microbiologically pure. The fertilizer was enriched with microelements to the level of 0.2% m/m and tested for biological effectiveness in germination tests and field studies. Compared with the commercial formulation, the fertilizer increased stem length and chlorophyll content (by 8.2% and 27.0%, respectively), wheat crop yield and grain micronutrients density (Cu by 31.2%, Mn by 10.5%, Zn by 33.9%) and improved the wheat flour baking properties. The described solution propose a safe way to utilize hazardous waste via technological mobile installation, enabling no transportation of waste, which is an important aspect of sanitary-epidemiological risk minimization.

Hydrogel Alginate Seed Coating as an Innovative Method for Delivering Nutrients at the Early Stages of Plant Growth.

Seed coating containing fertilizer nutrients and plant growth biostimulants is an innovative technique for precision agriculture. Nutrient delivery can also be conducted through multilayer seed coating. For this purpose, sodium alginate with NPK, which was selected in a preliminary selection study, crosslinked with divalent ions (Cu(II), Mn(II), Zn(II)) as a source of fertilizer micronutrients, was used to produce seed coating. The seeds were additionally coated with a solution containing amino acids derived from high-protein material. Amino acids can be obtained by alkaline hydrolysis of mealworm larvae (Gly 71.2 ± 0.6 mM, Glu 55.8 ± 1.3 mM, Pro 48.8 ± 1.5 mM, Ser 31.4 ± 1.5 mM). The formulations were applied in different doses per 100 g of seeds: 35 mL, 70 mL, 105 mL, and 140 mL. SEM-EDX surface analysis showed that 70 mL of formulation/100 g of seeds formed a continuity of coatings but did not result in a uniform distribution of components on the surface. Extraction tests proved simultaneous low leaching of nutrients into water (max. 10%), showing a slow release pattern. There occurred high bioavailability of fertilizer nutrients (even up to 100%). Pot tests on cucumbers (Cornichon de Paris) confirmed the new method's effectiveness, yielding a 50% higher fresh sprout weight and four times greater root length than uncoated seeds. Seed coating with hydrogel has a high potential for commercial application, stimulating the early growth of plants and thus leading to higher crop yields.

Antiviral Properties of Polyphenols from Plants.

Polyphenols are active substances against various types of viral infections. Researchers have characterized methods of how to isolate polyphenols without losing their potential to formulate pharmaceutical products. Researchers have also described mechanisms against common viral infections (i.e., influenza, herpes, hepatitis, rotavirus, coronavirus). Particular compounds have been discussed together with the plants in the biomass in which they occur. Quercetin, gallic acid and epigallocatechin are exemplary compounds that inhibit the growth cycle of viruses. Special attention has been paid to identify plants and polyphenols that can be efficient against coronavirus infections. It has been proven that polyphenols present in the diet and in pharmaceuticals protect us from viral infections and, in case of infection, support the healing process by various mechanisms, i.e., they block the entry into the host cells, inhibit the multiplication of the virus, seal blood vessels and protect against superinfection.

Valorization of postextraction residues-analysis of the influence of new feed additives with micronutrients on eggs quality parameters.

This paper presents attempts to enrich hens eggs with ions of copper, manganese, and zinc through the use of new feed additives (19 mg Cu2+; 124 mg Mn2+ and 85 mg Zn2+) such as biomass of alfalfa and goldenrod after extraction with supercritical carbon dioxide enriched with microelements via biosorption. Mechanical parameters of eggs (shell thickness and strength, Haugh unite), hen's laying performance, microelements content in albumen and yolk were examined and the transfer factor from feed to eggs was determined. The highest transfer of microelements content in albumen occurred in the group of hens fed with enriched goldenrod in a 100% dose (daily dose of microelements from biomass; Cu2+ 106%; Mn2+ 104%; Zn2+ 104% more in comparison to the inorganic salt group), while the highest yolk enrichment with microelements manifested itself for hens fed with enriched goldenrod in a 50% dose (daily dose of microelements from biomass; Cu2+ 32%; Zn2+ 22% more in comparison to the inorganic salt group). These groups also had the highest total microelements concentration. Mechanical properties of eggs varied insignificantly during the trial. Production parameters did not differ statistically among all experimental group. Eggs produced with need additives had better organoleptic parameters than fed with conventional premixes, which is why they were preferred by the respondents. The presented technology allows obtaining low-cost feed materials characterized by high bioavailability of components. The produced feed additives can serve as potential material for biofortification of eggs with nutrients.

New directions for agricultural wastes valorization as hydrogel biocomposite fertilizers.

The tremendous amount of waste is an environmental and social problem worldwide. The agri-food sector is the largest producer of waste and requires the extensive use of fertilizers, which entails the need to look for innovative solutions in waste management. Properly recycled bio-waste can be reused as fertilizer. Polymer capsules with immobilized waste biomass can be applied as carriers for fertilizer nutrients. The amount of components exerts a certain influence on the effectiveness of copper ions binding. The most important physicochemical properties of biocomposites, such as swelling, SEM (Scanning Electron Microscopy) and FTIR (Fourier Transform Infrared Spectroscopy) were investigated. FTIR analyzes revealed that carboxyl and hydroxyl groups play a key role in Cu2+ ion binding. Morphology analysis showed that ion binding leads to homogenization of the composite surface, while coating the structure makes it more regular and cohesive. The sorption kinetics and the determination of the process's equilibrium parameters (Qmax = 29.4 ± 0.493 mg g-1) play an important role. The study of Cu2+ ion release in different media showed that the chitosan layer slowed down the diffusion of cations by about 50% in NaNO3 (1% m/m) solution. Preliminary studies of the applicability of the capsules in germination tests demonstrate that the biocomposites have no phytotoxic effects on the test plant. The chitosan coating slows the release of Cu2+ ions by about 20% compared to uncoated capsules. New fertilizer formulations containing chitosan-encapsulated hydrogel with biomass-immobilized micronutrients can be applied for precision agriculture to minimize the loss of fertilizer nutrients to the environment. These fertilizers could be used to cultivate houseplants and greenhouse crops.

Agricultural and non-agricultural directions of bio-based sewage sludge valorization by chemical conditioning.

This literature review outlines the most important-agricultural and non-agricultural-types of sewage sludge management. The potential of waste sludge protein hydrolysates obtained by chemical sludge conditioning was reported. The discussed areas include acidic and alkaline hydrolysis, lime conditioning, polyelectrolyte dewatering and other supporting techniques such as ultrasounds, microwave or thermal methods. The legislative aspects related to the indication of the development method and admission to various applications based on specified criteria were discussed. Particular attention was devoted to the legally regulated content of toxic elements: cadmium, lead, nickel, mercury, chromium and microelements that may be toxic: copper and zinc. Various methods of extracting valuable proteins from sewage sludge have been proposed: chemical, physical and enzymatic. While developing the process concept, you need to consider extraction efficiency (time, temperature, humidity, pH), drainage efficiency of post-extraction residues and directions of their management. The final process optimization is crucial. Despite the development of assumptions for various technologies, excess sewage sludge remains a big problem for sewage treatment plants. The high costs of enzymatic hydrolysis, thermal hydrolysis and ultrasonic methods and the need for a neutralizing agent in acid solubilization limit the rapid implementation of these processes in industrial practice.

Innovative high digestibility protein feed materials reducing environmental impact through improved nitrogen-use efficiency in sustainable agriculture.

Sustainable development in agriculture brings both environmental and economic benefits. Contemporary agriculture is also about increasing nutrient use efficiency, especially nitrogen, as the critical nutrient causing the most significant environmental pressure. This creates the need to produce highly digestible protein feed with high bioavailability, reducing losses of biogenic elements to feces. In this review, the latest trends and the potential for their implementation in sustainable agriculture have been compared, as well as the need to reduce the negative environmental impact of agriculture has been demonstrated. Applying local protein sources to feed animals reduces greenhouse gas emissions associated with transportation. The production of highly digestible fodder leads to a reduction in environmental pollution caused by excessive nitrogen outflows. Another approach indecreasing ammonia emissions from livestock farming is feed protein reduction and amino acid supplementation. All of the aforementioned approaches may result in beneficial long-term changes, contributing to environmental safety, animal welfare and human health.

Potential environmental pollution from copper metallurgy and methods of management.

This paper presents the latest overview of the environmental impact of wastes from the non-ferrous metallurgical industry. Ashes, slags and dusts - by-products from mining and metal processing - are sources of toxic metals, such as Pb, Cd, Hg, As, Al, as well as particulate matter. Physical, chemical and biological processes transform industrial wastes and cause water, soil and air pollution. Improperly protected heaps are subject to wind erosion and rain water leaching. Heavy metals and particulate matter are transported over long distances, contaminating the soil, living areas, watercourses, while in combination with mist they create smog. Water erosion releases heavy metals, which are leached into groundwater or surface runoff. This paper focuses on the range of pollution emissions from non-ferrous metallurgy wastes, hazards, mechanisms of their formation and fallouts, on the current state of technology and technological risk reduction solutions. The impact of pollution on human health and the biosphere, and methods of waste reduction in this industry sector are also presented. A sustainable and modern mining industry is the first step to cleaner production.

3D printing filament as a second life of waste plastics-a review.

In recent times, the issue of plastic recycling has become one of the leading issues of environmental protection and waste management. Polymer materials have been found an application in many areas of daily life and industry. Along with their extended use, the problem of plastic wastes appeared because, after withdrawal from use, they became persistent and noxious wastes. The possibility of reusing polymeric materials gives a possibility of valorization-a second life-and enables effective waste utilization to obtain consumable products. The 3D printing market is a well-growing sector. Printable filaments can be made from a variety of thermoplastic materials, including those from recycling. This paper focuses on a review of the available literature on the production of filaments for 3D printers from recycled polymers as the alternative to present approach of central selective collection of plastics. The possibility of recycling of basic thermoplastic materials and the impact of processing on their physicochemical and mechanical properties were verified (Lanzotti et al. 2019). In addition, commercially available filaments produced from recycled materials and devices which allow self-production of filaments to 3D printing from plastic waste were reviewed.

Biofortification of edible plants with selenium and iodine - A systematic literature review.

Soil depletion with absorbed forms of microelements is a realistic problem leading to the formation of many human, plant, animal diseases related with micronutrient deficiencies. Searching for new ways to solve this problem is a crucial for the agro-chemical approach to food production. There are many research papers on plant micronutrient fertilization. However, there is still a lack of systematic review of the literature, which summarizes the most recent knowledge on biofortification of food of plant origin with microelements. This work is a systematic review which presents the various methodologies and compares the results of the applied doses and types of fertilizer formulation with the yield and micronutrient content of edible parts of plants. The PRISMA protocol-based review of the most recent literature data from the last 5 years (2015-2020) concerns enrichment of plants with selenium and iodine. These elements, in contrast to other microelements (zinc, manganese, iron, copper and others) are given to plants most often in anionic form: selenium - SeO32- and SeO42-, iodine - I- and IO3-, making them a separate subgroup of microelements. The review focuses on original research papers (not reviews), collected in 3 popular scientific databases: Scopus, Web of Knowledge, PubMed. This study shows how to effectively cope with hidden hunger taking into account the significance of optimized fertilization. Based on the collected data, the best method of micronutrients administration an integrated fortification strategy for selected trace elements and prospects in research/action development was proposed. It was found that the best way to enrich plants with selenium is foliar fertilization with Se(VI), in increased doses. The effectiveness of fortification is supported by the balanced nutrients fertilization, the presence of microorganisms and selection of plant varieties. Foliar fertilization, in increased doses with iodide (I-) is in turn an effective way to enrich plants with iodine.