Photochemical Etching of Carbonyl Groups from a Carbon Matrix: The (001) Diamond Surface.

The surface of diamond is reported to undergo nonablative photochemical etching when exposed to ultraviolet (UV) radiation which allows controlled single and partial layer removal of lattice layers. Oxygen termination of surface dangling bonds is known to be crucial for the etching process; however, the exact mechanism of carbon ejection remains unclear. We investigate the interaction of UV laser pulses with oxygen-terminated diamond surfaces using atomic-scale surface characterization combined with first-principles time-dependent density functional theory calculations. We present evidence for laser-induced desorption (LID) from carbonyl functional groups at the diamond {001} surface. The doubly bonded carbonyl group is photoexcited into a triply bonded CO-like state, including scission of the underlying C─C bonds. The carbon removal process in LID is atom by atom; therefore, this mechanism provides a novel "top-down" approach for creating nanostructures on the surface of diamond and other carbon-containing semiconductors.

Learning to balance on a slackline: Development of coordinated multi-joint synergies.

Previous research has investigated synergies involved in locomotion and balance reactions; however, there is limited insight into the emergence of skilled balance control with practice of challenging tasks. We explored motor learning of tandem and single leg stance on an unstable surface-a slackline. Balance was tested in 10 naïve healthy adults at four time points: baseline, after one slackline practice session, after 1 week of practice, and 1 week following the final practice session. We recorded kinematics of the upper and lower arms bilaterally, trunk, and thigh and foot unilaterally while participants balanced in tandem and single leg stance on a slackline and narrow rigid beam (transfer task). When participants first attempted to stand on the slackline, they exhibited fast and frequent movements across all joints with actions along the frontal plane (particularly the hip) and fell after a short period (~3 seconds). Performance improved rapidly (fewer falls), and this was accompanied by dampened trunk and foot oscillations and the development of coordinated movement patterns with a progressive emphasis on more distal upper body segments. Continuous relative phase angles between joint pairs began to cluster around either 0° (indicating in-phase movement) or 180° (indicating anti-phase movement). Participants also began to demonstrate coordinated upper body synergies and performance improvements (fewer falls) on the transfer task, while a control group (n = 10) did not exhibit similar synergies or performance improvements. Our findings describe the emergence of coordinated movement synergies involving the upper body as healthy adults learn a challenging balance task.

Ageing reduces light touch and vibrotactile sensitivity on the anterior lower leg and foot dorsum.

Cutaneous mechanoreceptors in the anterior lower leg and foot dorsum provide important information about contact with objects and movement at the knee and ankle. This cutaneous feedback contributes to static and dynamic balance control. We conducted experiment 1 to determine the effects of ageing on anterior lower leg cutaneous feedback. We measured light touch (monofilament) perceptual thresholds (MPT) at seven skin sites across the anterior lower leg and foot dorsum in 12 young (5 male, aged 21-28) and 13 older adults (8 male, aged 73-92). Results showed that older adults had ~5.5× higher MPTs across these skin sites. We conducted experiment 2 to probe how different cutaneous mechanoreceptor subtypes are affected by ageing through measures of vibrotactile perceptual threshold (VPT) at 3, 15, and 40Hz at six skin sites across the anterior lower leg and foot dorsum in 10 young (5 male, aged 21-26) and 10 older adults (3 male, aged 75-85). In this group, we also assessed functional balance using the timed-up-and-go (TUG) and functional reach test (FRT). Older adults demonstrated significantly higher VPTs overall, and this effect was largest at 40Hz - a frequency primarily transmitted by fast adapting cutaneous afferents. Furthermore, higher thresholds at each frequency tended to correlate with poorer performance on the TUG within the older adult group (3Hz: r=0.550; 15Hz: r=0.689; 40Hz: r=0.663). These results suggest ageing influences cutaneous feedback from regions of the lower leg that provide important information about movement and contact.

Two-photon polarization-selective etching of emergent nano-structures on diamond surfaces.

Optical techniques have advanced considerably in recent years to enable processing of surfaces with a resolution less than the wavelength of light. Despite the highly selective nature of light-matter interactions, however, efforts to increase resolution to the scale of single atoms are hampered by rapid and efficient dissipation of the absorbed energy to the surrounding matrix. Here we show that two-photon surface excitation using ultraviolet light provides a method for selectively removing carbon from diamond surfaces. Polished surfaces etched by this method develop ultra-deep subwavelength structures with morphologies dependent on the polarization of the incident laser with respect to the crystal axes. As well as revealing a practical and versatile method for nano-patterning of diamond surfaces, we show that the results comprise mesoscopic evidence for bond scission via a highly localized optical interaction that may lead to the development of new optical approaches for ultra-nanoscale (<10 nm) surface structuring.

Highly efficient diamond Raman laser.

We report an efficient 532 nm pumped external cavity diamond Raman laser generating output chiefly at the 573 nm first Stokes. At a pulse repetition rate of 5 kHz, the Raman laser generated 1.2 W output with a conversion efficiency of 63.5%, a slope efficiency of 75%, a pulse peak instantaneous conversion efficiency of 85%, and a peak photon conversion efficiency of 91%. The laser generated a maximum output energy of 0.67 mJ by increasing the pump beam size and the pulse energy. The efficiency is commensurate with the highest previously reported for other Raman materials pumped by Q-switched lasers.

All-solid-state parametric Raman anti-Stokes laser at 508 nm.

We report a parametric anti-Stokes Raman laser using potassium gadolinium tungstate, generating output chiefly at the first anti-Stokes at 508 nm. The compact 4.5 cm long device is pumped by a Q-switched 532 nm laser and uses an off-axis Stokes resonator to provide non-collinear phase matching between the pump and the generated Stokes and anti-Stokes fields. Anti-Stokes output energies up 0.27 mJ were obtained at a conversion efficiency from the pump of 0.46%. Second- and third-order anti-Stokes lines at 486 nm and 465 nm were also observed.

Increased wavelength options in the visible and ultraviolet for Raman lasers operating on dual Raman modes.

We report increased wavelength options from Raman lasers for Raman media having two Raman modes of similar gain coefficient. For an external-cavity potassium gadolinium tungstate Raman laser pumped at 532 nm, we show that two sets of Stokes orders are generated simultaneously by appropriate orientation of the Raman crystal, and also wavelengths that correspond to sums of the two Raman modes. Up to 14 visible Stokes lines were observed in the wavelength range 555-675 nm. The increase in Stokes wavelengths also enables a much greater selection of wavelengths to be accessed via intracavity nonlinear sum frequency and difference frequency mixing. For example, we demonstrate 30 output wavelength options for a wavelength-selectable 271-321 nm Raman laser with intracavity sum frequency mixing in BBO. We also present a theoretical analysis that enables prediction of wavelength options for dual Raman mode systems.

Efficient, all-solid-state, Raman laser in the yellow, orange and red.

We report efficient operation of a KGd(WO(4))(2) Raman laser pumped by a small, 1 W, 532 nm laser module. By changing the output coupler and Raman crystal orientation, more than 8 wavelengths in the yellow-to-red spectral region were generated including 555 nm, 559 nm, 579 nm, 589 nm, 606 nm, 622 nm, 636 nm and 658 nm, ie., the first 4 Stokes orders on the two orthogonal high-gain Raman shifts of KGd(WO(4))(2). We have also demonstrated spectrally pure output (typically >90% pure) for selected Stokes order with output power up to 400 mW. High slope efficiency (up to 68%) and high beam quality (M(2)~1.5) of Stokes output are obtained even at the highest pump power.

Hook method: recovery of density information from interferograms distorted by large spatial gradients.

The hook method is a well-established technique for measuring the spatial distribution of species' densities in the gas phase, particularly in optically thick plasmas. However, in the presence of large density gradients (such as those occurring in a metal vapor laser plasma), the hook interferogram suffers severe distortion and the standard hook equation is invalid. By the use of a computer simulation of fringe formation, it is shown that this effect arises as a result of the strong wavelength-dependent lensing of probe rays in the test medium. On the basis of this lensing mechanism, a criterion has been derived for the maximum permissible density gradient, above which the standard hook analysis cannot be accurately applied. Finally, a new technique is presented that permits density data to be recovered from interferograms that are too distorted to analyze by the use of standard techniques. This technique is based on extracting density gradient values from distortion-free features of the fringe pattern. The new technique also permits density data to be obtained with an increased spatial resolution over that of the standard hook analysis.