Extrinsic hydrophobicity-controlled silver nanoparticles as efficient and stable catalysts for CO2 electrolysis.

To realize economically feasible electrochemical CO2 conversion, achieving a high partial current density for value-added products is particularly vital. However, acceleration of the hydrogen evolution reaction due to cathode flooding in a high-current-density region makes this challenging. Herein, we find that partially ligand-derived Ag nanoparticles (Ag-NPs) could prevent electrolyte flooding while maintaining catalytic activity for CO2 electroreduction. This results in a high Faradaic efficiency for CO (>90%) and high partial current density (298.39 mA cm‒2), even under harsh stability test conditions (3.4 V). The suppressed splitting/detachment of Ag particles, due to the lipid ligand, enhance the uniform hydrophobicity retention of the Ag-NP electrode at high cathodic overpotentials and prevent flooding and current fluctuations. The mass transfer of gaseous CO2 is maintained in the catalytic region of several hundred nanometers, with the smooth formation of a triple phase boundary, which facilitate the occurrence of CO2RR instead of HER. We analyze catalyst degradation and cathode flooding during CO2 electrolysis through identical-location transmission electron microscopy and operando synchrotron-based X-ray computed tomography. This study develops an efficient strategy for designing active and durable electrocatalysts for CO2 electrolysis.

Toward economical application of carbon capture and utilization technology with near-zero carbon emission.

Carbon capture and utilization technology has been studied for its practical ability to reduce CO2 emissions and enable economical chemical production. The main challenge of this technology is that a large amount of thermal energy must be provided to supply high-purity CO2 and purify the product. Herein, we propose a new concept called reaction swing absorption, which produces synthesis gas (syngas) with net-zero CO2 emission through direct electrochemical CO2 reduction in a newly proposed amine solution, triethylamine. Experimental investigations show high CO2 absorption rates (>84%) of triethylamine from low CO2 concentrated flue gas. In addition, the CO Faradaic efficiency in a triethylamine supplied membrane electrode assembly electrolyzer is approximately 30% (@-200 mA cm-2), twice higher than those in conventional alkanolamine solvents. Based on the experimental results and rigorous process modeling, we reveal that reaction swing absorption produces high pressure syngas at a reasonable cost with negligible CO2 emissions. This system provides a fundamental solution for the CO2 crossover and low system stability of electrochemical CO2 reduction.

Exploring dopant effects in stannic oxide nanoparticles for CO2 electro-reduction to formate.

The electrosynthesis of formate from CO2 can mitigate environmental issues while providing an economically valuable product. Although stannic oxide is a good catalytic material for formate production, a metallic phase is formed under high reduction overpotentials, reducing its activity. Here, using a fluorine-doped tin oxide catalyst, a high Faradaic efficiency for formate (95% at 100 mA cm-2) and a maximum partial current density of 330 mA cm-2 (at 400 mA cm-2) is achieved for the electroreduction of CO2. Furthermore, the formate selectivity (≈90%) is nearly constant over 7 days of operation at a current density of 100 mA cm-2. In-situ/operando spectroscopies reveal that the fluorine dopant plays a critical role in maintaining the high oxidation state of Sn, leading to enhanced durability at high current densities. First-principle calculation also suggests that the fluorine-doped tin oxide surface could provide a thermodynamically stable environment to form HCOO* intermediate than tin oxide surface. These findings suggest a simple and efficient approach for designing active and durable electrocatalysts for the electrosynthesis of formate from CO2.

Electrode reconstruction strategy for oxygen evolution reaction: maintaining Fe-CoOOH phase with intermediate-spin state during electrolysis.

Computational calculations and experimental studies reveal that the CoOOH phase and the intermediate-spin (IS) state are the key factors for realizing efficient Co-based electrocatalysts for the oxygen evolution reaction (OER). However, according to thermodynamics, general cobalt oxide converts to the CoO2 phase under OER condition, retarding the OER kinetics. Herein, we demonstrate a simple and scalable strategy to fabricate electrodes with maintaining Fe-CoOOH phase and an IS state under the OER. The changes of phase and spin states were uncovered by combining in-situ/operando X-ray based absorption spectroscopy and Raman spectroscopy. Electrochemical reconstruction of chalcogenide treated Co foam affords a highly enlarged active surface that conferred excellent catalytic activity and stability in a large-scale water electrolyzer. Our findings are meaningful in that the calculated results were experimentally verified through the operando analyses. It also proposes a new strategy for electrode fabrication and confirms the importance of real active phases and spin states under a particular reaction condition.

High crystallinity design of Ir-based catalysts drives catalytic reversibility for water electrolysis and fuel cells.

The voltage reversal of water electrolyzers and fuel cells induces a large positive potential on the hydrogen electrodes, followed by severe system degradation. Applying a reversible multifunctional electrocatalyst to the hydrogen electrode is a practical solution. Ir exhibits excellent catalytic activity for hydrogen evolution reactions (HER), and hydrogen oxidation reactions (HOR), yet irreversibly converts to amorphous IrOx at potentials > 0.8 V/RHE, which is an excellent catalyst for oxygen evolution reactions (OER), yet a poor HER and HOR catalyst. Harnessing the multifunctional catalytic characteristics of Ir, here we design a unique Ir-based electrocatalyst with high crystallinity for OER, HER, and HOR. Under OER operation, the crystalline nanoparticle generates an atomically-thin IrOx layer, which reversibly transforms into a metallic Ir at more cathodic potentials, restoring high activity for HER and HOR. Our analysis reveals that a metallic Ir subsurface under thin IrOx layer can act as a catalytic substrate for the reduction of Ir ions, creating reversibility. Our work not only uncovers fundamental, uniquely reversible catalytic properties of nanoparticle catalysts, but also offers insights into nanocatalyst design.

Solution-processed near-infrared Cu(In,Ga)(S,Se)2 photodetectors with enhanced chalcopyrite crystallization and bandgap grading structure via potassium incorporation.

Although solution-processed Cu(In,Ga)(S,Se)2 (CIGS) absorber layers can potentially enable the low-cost and large-area production of highly stable electronic devices, they have rarely been applied in photodetector applications. In this work, we present a near-infrared photodetector functioning at 980 nm based on solution-processed CIGS with a potassium-induced bandgap grading structure and chalcopyrite grain growth. The incorporation of potassium in the CIGS film promotes Se uptake in the bulk of the film during the chalcogenization process, resulting in a bandgap grading structure with a wide space charge region that allows improved light absorption in the near-infrared region and charge carrier separation. Also, increasing the Se penetration in the potassium-incorporated CIGS film leads to the enhancement of chalcopyrite crystalline grain growth, increasing charge carrier mobility. Under the reverse bias condition, associated with hole tunneling from the ZnO interlayer, the increasing carrier mobility of potassium-incorporated CIGS photodetector improved photosensitivity and particularly external quantum efficiency more than 100% at low light intensity. The responsivity and detectivity of the potassium-incorporated CIGS photodetector reach 1.87 A W-1 and 6.45 [Formula: see text] 1010 Jones, respectively, and the - 3 dB bandwidth of the device extends to 10.5 kHz under 980 nm near-infrared light.

Achieving over 15% Efficiency in Solution-Processed Cu(In,Ga)(S,Se)2 Thin-Film Solar Cells via a Heterogeneous-Formation-Induced Benign p-n Junction Interface.

Cu(In,Ga)(S,Se)2 (CIGS) thin-film solar cells have attracted considerable interest in the field of photovoltaic devices due to their high efficiency and great potential for diverse applications. While CdS has been the most favorable n-type semiconductor because of its excellent lattice-match and electronic band alignment with p-type CIGS, its narrow optical band gap (∼2.4 eV) has limited light absorption in underlying CIGS absorber films. Reducing the thickness of CdS films to increase the short-circuit current-density has been less effective due to the following decrease in the open-circuit voltage. To overcome this trade-off between the main parameters, we controlled the formation mechanism of CdS films in chemical bath deposition and established its direct correlation with the properties of p-n junctions. Interestingly, a heterogeneous CdS film formation was found to have a synergetic effect with its ammonia bath solution, effectively reducing charge carrier loss from the shunt paths and interface recombination of CIGS/CdS junctions. With these electrical benefits, the trade-off was successfully alleviated and our best device achieved a power conversion efficiency of 15.6%, which is one of the state-of-the-art CIGS thin-film solar cells prepared using solution-processing techniques.

Impact of Absorber Layer Morphology on Photovoltaic Properties in Solution-Processed Chalcopyrite Solar Cells.

Solution-processed chalcopyrite solar cells can be economically produced on a large scale; however, for them to be commercially viable, their low efficiency and detrimental processing have to be overcome. To this end, extensive research efforts have been devoted to boost device efficiency and develop benign solution processes. In this review, relevant processes are categorized into molecular-based and particulate-based solution processes, and progress is evaluated in terms of device performance and processing. To identify strategies for improving device performance, the key parameters affecting the optoelectronic properties of the device are discussed. Interestingly, the authors found an unnoticed fact from previously reported experimental results in literature: short-circuit current density increases and deficit of open-circuit voltage decreases as the average domain size of the absorber layer increases. In addition, the power conversion efficiency increases with the grain size irrespective of the band gap, thickness, and processing conditions. Ensuring a large grain size is specifically elucidated to be necessary to increase the photocurrent generation and reduce the charge carrier recombination in the chalcopyrite solar cells. The findings and related reviews afford critical insight into the absorber film design to improve the performance of solution-processed chalcopyrite solar cells.

Morphological-Electrical Property Relation in Cu(In,Ga)(S,Se)2 Solar Cells: Significance of Crystal Grain Growth and Band Grading by Potassium Treatment.

Solution-processed Cu(In,Ga)(S,Se)2  (CIGS) has a great potential for the production of large-area photovoltaic devices at low cost. However, CIGS solar cells processed from solution exhibit relatively lower performance compared to vacuum-processed devices because of a lack of proper composition distribution, which is mainly instigated by the limited Se uptake during chalcogenization. In this work, a unique potassium treatment method is utilized to improve the selenium uptake judiciously, enhancing grain sizes and forming a wider bandgap minimum region. Careful engineering of the bandgap grading structure also results in an enlarged space charge region, which is favorable for electron-hole separation and efficient charge carrier collection. Besides, this device processing approach has led to a linearly increasing electron diffusion length and carrier lifetime with increasing the grain size of the CIGS film, which is a critical achievement for enhancing photocurrent yield. Overall, 15% of power conversion efficiency is achieved in solar cells processed from environmentally benign solutions. This approach offers critical insights for precise device design and processing rules for solution-processed CIGS solar cells.

Single-atom catalysts for the oxygen evolution reaction: recent developments and future perspectives.

Single-atom catalysts (SACs) possess the potential to achieve unique catalytic properties and remarkable catalytic mass activity by utilizing low-coordination and unsaturated active sites. However, smaller particles tend to aggregate into clusters or particles owing to their high surface energy. In addition, support materials that have strong interactions with isolated metal atoms, extremely large surface areas, and electrochemical stability are required. Therefore, sufficient information about these factors is needed to synthesize and utilize SACs. Herein, we review the recent investigations and advances in SACs for the oxygen evolution reaction (OER). We present not only the structural characterization of SACs, but also in situ/operando spectroscopic techniques and computational research for SACs to understand the mechanism and reveal the origin of their excellent OER activity. Furthermore, the OER catalytic activity and stability of SACs are summarized to evaluate the current level of SACs. Currently, research on single-atoms as OER catalysts is in the infant stage for synthesis, characterization and mechanism studies. We discuss some challenges for understanding the fundamentals of SACs and enhancing the catalytic performance of SACs for industrial applications.

Electroactivation-induced IrNi nanoparticles under different pH conditions for neutral water oxidation.

Electrochemical oxidation processes can affect the electronic structure and activate the catalytic performance of precious-metal and transition-metal based catalysts for the oxygen evolution reaction (OER). Also there are emerging requirements to develop OER electrocatalysts under various pH conditions in order to couple with different reduction reactions. Herein, we studied the effect of pH on the electroactivation of IrNi alloy nanoparticles supported on carbon (IrNi/C) and evaluated the electrocatalytic activities of the activated IrNiOx/C for water oxidation under neutral conditions. In addition, their electronic structures and atomic arrangement were analyzed by in situ/operando X-ray absorption spectroscopy (XAS) and identical location transmission electron microscopy techniques, showing the reconstruction of the metal elements during electroactivation due to their different stabilities depending on the electrolyte pH. IrNiOx/C activated under neutral pH conditions showed a mildly oxidized thin IrOx shell. Meanwhile, IrNiOx/C activated in acidic and alkaline electrolytes showed Ni-leached IrOx and Ni-rich IrNiOx surfaces, respectively. Particularly, the surface of IrNiOx/C activated under alkaline conditions shows IrOx with a high d-band hole and NiOx with a high oxidation state leading to excellent OER catalytic activity in neutral media (η = 384 mV at 10 mA cm-2) whereas much lower OER activity was reported under alkaline or acid conditions. Our results, which showed that electrochemically activated catalysts under different pH conditions exhibit a unique electronic structure by modifying the initial alloy catalyst, can be applied for the design of catalysts suitable for various electrochemical reactions.

Boosting Solar Cell Performance via Centrally Localized Ag in Solution-Processed Cu(In,Ga)(S,Se)2 Thin Film Solar Cells.

Fabrication of Cu(In,Ga)(S,Se)2 (CIGSSe) absorber films from environmentally friendly solutions under ambient air conditions for use in solar cells has shown promise for the low-cost mass production of CIGSSe solar cells. However, the limited power conversion efficiency (PCE) of these solar cells compared with their vacuum-processed counterparts has been a critical setback to their practical applications. This study aims to fabricate solution-processed CIGSSe solar cells with high PCEs by incorporation of Ag into the precursor layer of the CIGSSe absorber films. The results showed that Ag doping promoted grain growth by accelerating Se uptake, irrespective of the location within the CIGSSe film. Nevertheless, uniform Ag doping formed crevices that lowered the PCE of the cells, while centrally localizing the doped Ag prevented the formation of crevices, resulting in high PCEs up to 15.3%. Our results demonstrate that carefully doping Ag into a selected area of the precursor layer of the CIGSSe films can realize solution-processed chalcopyrite solar cells with high PCE.

Electrochemical ß-Selective Hydrocarboxylation of Styrene Using CO2 and Water.

The carboxylation of hydrocarbons using CO2 as a one-carbon building block is an attractive route for the synthesis of carboxylic acids and their derivatives. Until now, chemical carboxylation catalyzed by organometallic nucleophiles and reductants has been generally adopted particularly for the precise selectivity control of carboxylation sites. As another approach, electrochemical carboxylation has been attempted but these carboxylation reactions are limited to only a few pathways. In the case of styrene, dicarboxylation at the α- and ß-positions is mostly observed with electrochemical carboxylation while site-selective hydrocarboxylations are hardly achieved. In this study, electrochemical ß-selective hydrocarboxylation of styrene using CO2 and water is developed, in which the site selectivity can be precisely controlled between ß-hydrocarboxylation and dicarboxylation without the aid of homogeneous catalysts. In this platform, water is used as proton source in the ß-hydrocarboxylation of styrene where its addition results in significant enhancement of the selectivity toward ß-hydrocarboxylation. This work provides insights into new strategies for site-selectivity-controllable carboxylation with CO2 using an electrochemical platform.

Synthesis of V-doped In2O3 Nanocrystals via Digestive-Ripening Process and Their Electrocatalytic Properties in CO2 Reduction Reaction.

The development of synthetic methods for monodisperse nanomaterial is of great importance in science and technology related to nanomaterials. The strong demands to prepare exceptionally monodisperse nanocrystals have made digestive-ripening one of the most sought-after size-focusing processes. Although digestive-ripening processes have been demonstrated to produce various metals and semiconductors, their applicability to oxides has rarely been studied despite various unique properties and applications of oxide nanomaterials. In this work, we demonstrate the successful synthesis of monodisperse V-doped In2O3 nanocrystals via a modified digestive-ripening process. The nanocrystals have truncated octahedral shape faceted with eight (222) and six (220) planes. To the best of our knowledge, this is the first report on the digestive-ripening synthesis of highly symmetrical doped oxide nanocrystals. Moreover, V-doped In2O3 nanocrystals exhibit electrocatalytic activities for CO2 electrochemical reduction and produce CH3OH, which has not been attainable from previously reported electrocatalysts based on indium or indium oxide. This distinctive catalytic property of V-doped In2O3 is attributed to the presence of V-dopants in the In2O3 host. Our demonstration has important implications for both nanocrystal synthesis and electrocatalyst development.

General technoeconomic analysis for electrochemical coproduction coupling carbon dioxide reduction with organic oxidation.

Electrochemical processes coupling carbon dioxide reduction reactions with organic oxidation reactions are promising techniques for producing clean chemicals and utilizing renewable energy. However, assessments of the economics of the coupling technology remain questionable due to diverse product combinations and significant process design variability. Here, we report a technoeconomic analysis of electrochemical carbon dioxide reduction reaction-organic oxidation reaction coproduction via conceptual process design and thereby propose potential economic combinations. We first develop a fully automated process synthesis framework to guide process simulations, which are then employed to predict the levelized costs of chemicals. We then identify the global sensitivity of current density, Faraday efficiency, and overpotential across 295 electrochemical coproduction processes to both understand and predict the levelized costs of chemicals at various technology levels. The analysis highlights the promise that coupling the carbon dioxide reduction reaction with the value-added organic oxidation reaction can secure significant economic feasibility.

Cyclic two-step electrolysis for stable electrochemical conversion of carbon dioxide to formate.

Pd metal and Pd-based alloys are ideal catalysts that allow for the electrochemical conversion of CO2 to HCOO- at almost zero-overpotential with high selectivity, but catalyst degradation caused by concurrent CO poisoning limits their practical implementation. Here, we demonstrate that cyclic two-step electrolysis, by applying the reduction and oxidation potentials alternately, achieves 100% current density stability and 97.8% selectivity toward HCOO- production for at least 45 h. The key idea for achieving the reliability is based on the selective removal of CO by controlling the parameters during the oxidation step, which utilizes the different reversibility of HCOO- and CO production reactions. Furthermore, it is found that potentiostatic electrolysis causes CO adsorption and subsequent dehydridation, which in turn lowers HCOO- selectivity. Our work provides a system-level strategy for solving the poisoning issue that is inevitable in many electrocatalytic reactions.

Stable and Colorful Perovskite Solar Cells Using a Nonperiodic SiO2/TiO2 Multi-Nanolayer Filter.

While research on building-integrated photovoltaics (BIPVs) has mainly focused on power-generating window applications, the utilization of other underutilized surface areas in buildings, including exteriors, facades, and rooftops, has still not been fully explored. The most important requirements for BIPVs are color, power conversion efficiency (PCE), and long-term stability. In this work, we achieved colorful (red, green, blue, RGB) perovskite solar cells (PSCs) with minimized PCE loss (<10%) and enhanced photostability by exploiting the optical properties of nonperiodic multi-nanolayer, narrow-bandwidth reflective filters (NBRFs). The NBRFs were fabricated by multilayering high-index TiO2/low-index SiO2 in a nonperiodic manner, which allowed devices to demonstrate various colors with effectively suppressed unwanted baseline ripple-shape reflectance. The PCEs of PSCs with nonperiodic RGB-NBRFs were 18.0%, 18.6%, and 18.9%, which represent reductions of only 10%, 7%, and 6% of PCE values, respectively, compared to a black control PSC (20.1%). Moreover, the photostability of the PSCs was substantially improved by using the NBRFs because of ultraviolet blocking in the TiO2 layers. The G-PSC retained 65% of the initial PCE after 60 h of continuous illumination (AM 1.5G one sun) at the maximum power point, whereas the black PSC retained only 30%. Aesthetic color value, low PCE loss, and enhanced photostability of PSCs were simultaneously achieved by employing our NBRFs, making this a promising strategy with potential applicability in power-generating building exteriors.

Theoretical insights into selective electrochemical conversion of carbon dioxide.

Electrochemical conversion of CO2 and water to valuable chemicals and fuels is one of the promising alternatives to replace fossil fuel-based processes in realizing a carbon-neutral cycle. For practical application of such technologies, suppressing hydrogen evolution reaction and facilitating the activation of stable CO2 molecules still remain major challenges. Furthermore, high production selectivity toward high-value chemicals such as ethylene, ethanol, and even n-propanol is also not easy task to achieve. To settle these challenges, deeper understanding on underlying basis of reactions such as how intermediate binding affinities can be engineered at catalyst surfaces need to be discussed. In this review, we briefly outline recent strategies to modulate the binding energies of key intermediates for CO2 reduction reactions, based on theoretical insights from density functional theory calculation studies. In addition, important design principles of catalysts and electrolytes are also provided, which would contribute to the development of highly active catalysts for CO2 electroreduction.

Impact of Buffer Layer Process and Na on Shunt Paths of Monolithic Series-connected CIGSSe Thin Film Solar Cells.

The illuminated current-voltage characteristics of Cu(In,Ga)(S,Se)2 (CIGSSe) thin film solar cells fabricated using two different buffer layer processes: chemical bath deposition (CBD) and atomic layer deposition (ALD) were investigated. The CIGSSe solar cell with the ALD buffer showed comparable conversion efficiency to the CIGSSe solar cell with CBD buffer but lower shunt resistance even though it showed lower point shunt defect density as measured in electroluminescence. The shunt paths were investigated in detail by capturing the high-resolution dark lock-in thermography images, resolving the shunt resistance contributions of the scribing patterns (P1, P3), and depth profiling of the constituent elements. It was found that the concentration of Na from the soda-lime glass substrate played a key role in controlling the shunt paths. In the ALD process, Na segregated at the surface of CIGSSe and contributed to the increase in the shunt current through P1 and P3, resulting in a reduction in the fill factor of the CIGSSe solar cells.

RGB-Colored Cu(In,Ga)(S,Se)2 Thin-Film Solar Cells with Minimal Efficiency Loss Using Narrow-Bandwidth Stopband Nano-Multilayered Filters.

Colorful Cu(In,Ga)(S,Se)2 (CIGSSe) thin-film solar cells were achieved by integrating a narrow-bandwidth stopband filter (NBSF) on a CIGSSe cell. The full range of visible color of NBSF could be realized by depositing one-dimensional nano-multilayers of alternating high-index (Al2O3) and low-index (SiO2) films while controlling the thickness of each layer and the number of stacked layers. Particularly, high-purity red, green, and blue (RGB) colors were generated on black CIGSSe cells with minimal harvest efficiency drop, showing power conversion efficiency (PCE) losses for the red and green CIGSSe cells of 4.2 and 1.2%, respectively, with no reduction in the PCE of the blue CIGSSe cell. The minimal drop in the harvest efficiency was attributed to the antireflection effect of the NBSF and the low overlap between the reflectance spectrum of NBSFs with a narrow stopband and the absorption spectrum of CIGSSe. The esthetic value could be further enhanced through the color variation of the RGB NBSF with viewing angle, so-called pearl-like colors. The synergetic effect of minimal efficiency loss, full color realization, and the pearl-like color change of the newly developed NBSFs can make CIGSSe cells applicable to building-integrated photovoltaics.