RESUMO
This paper reports the newly measured experimental data for CO2 solubility in a blended aqueous solution of monoethanolamine (MEA) and 2-amino-2-methyl-propanol (AMP) at different amine mixing ratios (MEA/AMP/H2O = 9:21:70, 15:15:70, and 21:9:70 wt %) and working temperatures (323.15, 373.15, and 383.15 K). The successive substitution method was used for calculating the mole fractions of all molecules (four molecules) and electrolytes (three cations and four anions) from the equilibrium along with the material and charge balance equations (11 equations). The electrolyte nonrandom two-liquid (e-NRTL) model was used to investigate nonideality in the liquid phase. Using the abovementioned thermodynamic models, the partial pressures of CO2 in the gas phase, mole fractions of all components in the liquid phase, pH variations, heats of absorption, and cyclic capacities of CO2 according to the absorption/desorption temperature and the blending ratio of MEA/AMP were estimated.
RESUMO
Aqueous 1,8-diamino-p-menthane (KIER-C3) and commercially available amine solutions were tested for CO2 absorption. A 2-amino-2-methyl-1-propanol (AMP) solution with an addition of KIER-C3 showed 9.3% and 31.6% higher absorption rate for CO2 than the AMP solution with an addition of monoethanolamine (MEA) and ammonia (NH3), respectively. The reaction rate constant for CO2 absorption by the AMP/KIER-C3 solution was determined by the following equation: k2,AMP/C3 = 7.702 x 10(6) exp (-2248.03/T). A CO2 loading ratio of the AMP/KIER-C3 solution was also 2 and 3.4-times higher than that of the AMP/NH3 solution and the AMP/MEA solution, respectively. Based on the experimental results, KIER-C3 may be used as an excellent additive to increase CO2 absorption capability of AMP.
