Effect of activated carbon electrode material characteristics on hardness control performance of membrane capacitive deionization.

Capacitive deionization (CDI) is an electrochemical-based water treatment technology that has attracted attention as an effective hardness-control process. However, few systematic studies have reported the criteria for the selection of suitable electrode materials for membrane capacitive deionization (MCDI) to control hardness. In this study, the effect of electrode material characteristics on the MCDI performance for hardness control was quantitatively analyzed. The results showed that the deionization capacity and the deionization rate were affected by the specific capacitance and BET-specific surface area of the activated carbon electrode. In addition, the deionization rate also showed significant relationship with the BET specific surface area. Furthermore, it was observed that the deionization capacity and the deionization rate have a highly significant relationship with the BET specific surface area divided by the wettability performance expressed as the minimum wetting rate (MWR). These findings highlighted that the electrode material should have a large surface area and good wettability to increase the deionization capacity and the deionization rate of MCDI for hardness control. The results of this study are expected to provide effective criteria for selecting MCDI electrode materials aiming hardness control.

A simple expression for the apparent reaction rate of large wood char gasification with steam.

A simple expression for the apparent reaction rate of large wood char gasification with steam is proposed. Large char samples were gasified under steam atmosphere using a thermo-balance reactor. The apparent reaction rate was expressed as the product of the intrinsic rate and the effective factor. The effective factor was modified to include the effect of change in char diameter and intrinsic reaction rate during the reaction. Assuming uniform conversion ratio throughout a particle, the simplified reaction scheme was divided into three stages. In the initial stage, the local conversion ratio increases without particle shrinkage. In the middle stage, the particle shrinks following the shrinking core model without change in the local conversion ratio. In the final stage, the local conversion ratio increases without particle shrinkage. The validity of the modified effective value was confirmed by comparison with experimental results.

Coaxially electrospun micro/nanofibrous poly(epsilon-caprolactone)/eggshell-protein scaffold.

Eggshell membrane (ESM) has potential as a natural scaffold because of its highly porous structure and good biocompatibility. To mimic its structure and surface properties, soluble eggshell membrane protein (SEP) was extracted from ESM and electrospun with a biodegradable polymer, poly(epsilon-caprolactone) (PCL). SEP/PCL micro/nanofibers were fabricated using a coaxial electrospinning process with a dual nozzle and an auxiliary cylindrical electrode. The fiber web was characterized using the water contact angle, pore-size distribution, mechanical properties and cellular behavior. The SEP/PCL web, which demonstrated the feasibility of producing a scaffold with adequate hydrophilicity, suitable pore size and good mechanical properties compared to a pure PCL micro/nanofiber web, exhibits the ability to mimic a natural biomaterial.

Fabrication of a biocomposite reinforced with hydrophilic eggshell proteins.

Soluble eggshell proteins were used as a reinforcing material of electrospun micro/nanofibers for tissue engineering. A biocomposite composed of poly(epsilon-caprolactone) (PCL) micro/nanofibers and soluble eggshell protein was fabricated with a two-step fabrication method, which is an electrospinning process followed by an air-spraying process. To achieve a stable electrospinning process, we used an auxiliary cylindrical electrode connected with a spinning nozzle. PCL biocomposite was characterized in water contact angle and mechanical properties as well as cell proliferation for its application as a tissue engineering material. It showed an improved hydrophilic characteristic compared with that of a micro/nanofiber web generated from a pure PCL solution using a typical electrospinning process. Moreover, the fabricated biocomposite had good mechanical properties compared to a typical electrospun micro/nanofiber mat. The fabricated biocomposite made human dermal fibroblasts grow better than pure PCL. From the results, the reinforced polymeric micro/nanofiber scaffold can be easily achieved with these modified processes.