Releasing a bound molecular spring with light: a visible light-triggered photosalient effect tied to polymorphism.

Here we present a study on the solid state properties of trans tetra-ortho-bromo azobenzene (4Br-Azo). Two distinct crystal polymorphs were identified: the α-phase and ß-phase. Notably, only the ß-phase exhibited an extraordinary photosalient effect (jumping/breaking) upon exposure to a wide range of visible light. Powder X-ray diffraction and Raman spectroscopy revealed that the ß-phase is metastable and can transition to the α-phase when subjected to specific stimuli like heat and light. Furthermore, single crystal X-ray diffraction and density functional theory calculations highlighted the significance of a highly strained conformer in the ß-phase, showing that the metastability of the phase potentially arises from relieving this strain. This metastability leads to a light induced phase transition, which appears to be the cause of the photosalient effect in these crystals. Interestingly the polymorphism at the core of 4Br-Azo's dynamic behavior is based on different arrangements of halogen based intermolecular interactions. It is possible that continued study on combining visible light capturing chromophores with halogen interaction-based polymorphism will lead to the discovery of even more visible light controlled dynamic crystal materials.

Synthesis of Multiblock Copolymer Composed of Biodegradable Poly(butylene succinate) and Poly(2-pyrrolidone): Impact of Each Block Length on the Mechanical Properties.

A series of multiblock copolymers comprising a systematic combination of biomass-originated and biodegradable poly(butylene succinate) (PBS) and poly(2-pyrrolidone) (PA4) units is synthesized with various mean degrees of polymerization (mDP) of each unit. Despite the inherent immiscibility of PBS and PA4, multiblock structure allows to mix the two components in the solution-cast films from solution. The mechanical properties of the cast films are highly dependent on the mDP of each unit, as demonstrated by tensile tests. The film of the copolymer with the lowest mDP of each unit (PBS: 17, PA4: 10) is transparent and exhibits extremely high elongation at break (> 400%) and high tensile stress (39.5 MPa) with strain hardening. The films with 50% or higher crystallinity are brittle and opaque, while a decrease in crystallinity can result in higher elongation, as revealed by wide-angle X-ray diffraction measurements.

Self-Assembling Properties and Recovery Effects on Damaged Skin Cells of Chemically Synthesized Mannosylerythritol Lipids.

Mannosylerythritol lipids (MELs), which are one of the representative sugar-based biosurfactants (BSs) produced by microorganisms, have attracted much attention in various fields in the sustainable development goals (SDGs) era. However, they are inseparable mixtures with respect to the chain length of the fatty acids. In this study, self-assembling properties and structure-activity relationship (SAR) studies of recovery effects on damaged skin cells using chemically synthesized MELs were investigated. It was revealed, for the first time, that synthetic and homogeneous MELs exhibited significant self-assembling properties to form droplets or giant vesicles. In addition, a small difference in the length of the fatty acid chains of the MELs significantly affected their recovery effects on the damaged skin cells. MELs with medium or longer length alkyl chains exhibited much higher recovery effects than that of C18-ceramide NP.

Photohardenable Pressure-Sensitive Adhesives using Poly(methyl methacrylate) containing Liquid Crystal Plasticizers.

Hardenable pressure-sensitive adhesives, which show pressure-sensitive adhesion state with weak adhesion strength in their initial semisolid state and general adhesion state with strong adhesion strength in their hardened state, are desirable in various industrial fields to improve efficiency of manufacturing and recycling products. Here we developed novel photohardenable pressure-sensitive adhesives triggered by photoplasticization of poly(methyl methacrylate) containing photoresponsive liquid crystal (nematic and smectic E) plasticizers at various ratios. It was found that photoplasticization, which is the photoinduced reduction of glass transition temperature and hardness of polymers, could be repeatedly induced by alternate irradiation with ultraviolet (UV) and visible (Vis) light in all mixtures, regardless of the phase structures of the photoresponsive plasticizers. Upon photoplasticization under UV-light irradiation, all mixtures exhibited glassy-to-rubbery transition to a pressure-sensitive adhesion state under appropriate conditions. Upon irradiation of the photoplasticized samples with Vis light, the samples recovered their initial hardened state, recovering the glassy nature with elastic moduli. The adhesion strength of the samples in the hardened state was significantly influenced by the phase structures of the plasticizers. When a photoresponsive plasticizer exhibited the smectic E phase, which is a highly ordered liquid-crystalline phase, the adhesion strength was remarkably larger than those of the case using the plasticizers showing nematic and crystalline phases. This result was reasonably explained in terms of the suppressed bleed-out of the photoresponsive plasticizers from the polymer and the good mechanical properties of the mixture stemming from the characteristics of the smectic E phase. Furthermore, through the reversibility of a photoplasticization process, we achieved a photoinduced reduction of the adhesion strength by UV irradiation of the samples in the hardened state. Photohardenable pressure-sensitive adhesives with reversibility has been developed using a commodity plastic just by adding the photoresponsive plasticizer showing the smectic E phase.

Effects of Fiber Stiffening to a Soft Actuator with PEDOT/PSS Electrode Films on Actuation Cycling Stability.

In this work, we fabricated a fiber-stiffened soft actuator with PEDOT/PSS films as electrode. Embedding nylon fibers in the soft actuator successfully suppressed twisting deformations, resulting in a large and persistent actuation displacement. We evaluated the effects of the fiber spacing (1, 2, 3 and 4 mm) on the displacement and assessed the actuation displacement as a function of applied voltage (0.5, 1.0 and 1.5 V) and frequency (0.2 and 1 Hz) with an actuation time of 500 s. We demonstrated that the fiberstiffened actuator with 2 mm fiber spacing exhibited steady actuation cycles (4.2 mm average displacement) in comparison with those with different spacings (1, 3, and 4 mm) and that without the fiber.

Internal constraints and arrested relaxation in main-chain nematic elastomers.

Nematic liquid crystal elastomers (N-LCE) exhibit intriguing mechanical properties, such as reversible actuation and soft elasticity, which manifests as a wide plateau of low nearly-constant stress upon stretching. N-LCE also have a characteristically slow stress relaxation, which sometimes prevents their shape recovery. To understand how the inherent nematic order retards and arrests the equilibration, here we examine hysteretic stress-strain characteristics in a series of specifically designed main-chain N-LCE, investigating both macroscopic mechanical properties and the microscopic nematic director distribution under applied strains. The hysteretic features are attributed to the dynamics of thermodynamically unfavoured hairpins, the sharp folds on anisotropic polymer strands, the creation and transition of which are restricted by the nematic order. These findings provide a new avenue for tuning the hysteretic nature of N-LCE at both macro- and microscopic levels via different designs of polymer networks, toward materials with highly nonlinear mechanical properties and shape-memory applications.

Actuation Properties of Paper Actuators Fabricated Using PEDOT/PSS Electrode Films.

The development of actuators for power sources is essential for the efficient manipulation of fluids in microfluidics systems. In this work, a capacitor-type three-layer paper actuator was fabricated by sandwiching a polyelectrolyte layer between two films of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS). The paper actuator exhibited stable large electromechanical deformations in bilateral symmetry under alternating square-wave electric field. The actuation properties were examined in a function of voltage (±0.5, ±1, ±1.5, ±2, and ±2.5 V) and frequency (1, 0.5, 0.2, and 0.05 Hz). In addition, the PEDOT/PSS electrode films with different thicknesses were prepared, and the effects of actuator thickness on actuation properties were examined. As a result, it was found that the actuator displacement increased considerably with reducing actuator thickness. In addition, the actuator with a thickness of 48 µm demonstrated a maximum displacement of 5.8 mm at a voltage of 1.5 V and a frequency of 0.05 Hz. The proposed actuator can be potentially used in the development of power sources for micropumps and check valves of microfluidic devices.

Preparation and Formation Process of Zn(II)-Coordinated Nanovesicles.

Mixing a glycylglycine lipid and zinc acetate has been reported to form novel supramolecular Zn(II)-coordinated nanovesicles in ethanol. In this study, we investigate in detail the formation of nanovesicles by using three lipids at different temperatures and discuss their formation process. The original lipids show extremely low solubilities and appear as plate structures in ethanol. Within a small window of lipid solubility, the formation of lipid-Zn(II) complexes occurs mainly on the solid surfaces of plate structures. Controlling of the lipid solubility by temperature affects the kinetics of complex formation and the subsequent transformation of the complexes into nanovesicles and nanotubes. An improved method of two-step control of temperature is developed for preparing all the three kinds of nanovesicles. We provide new insights into the formation process of nanovesicles based on several control experiments. A tetrahedral lipid-cobalt(II) complex similarly produces nanovesicles, whereas an octahedral complex gives sheet structures. Mixing of zinc acetate with a ß-alanyl-ß-alanine lipid can only give sheet structures, which lack a polyglycine II hydrogen-bond network and induce no morphological changes. We conclude that the formation of the lipid-Zn(II) complexes on solid plate structures, tetrahedral geometry, and polyglycine II hydrogen-bond network in the complexes shall work cooperatively for the formation of Zn(II)-coordinated nanovesicles.

Lipid Nanotube Tailored Fabrication of Uniquely Shaped Polydopamine Nanofibers as Photothermal Converters.

Helically coiled and linear polydopamine (PDA) nanofibers were selectively fabricated with two different types of lipid nanotubes (LNTs) that acted as templates. The obtained coiled PDA-LNT hybrid showed morphological advantages such as higher light absorbance and photothermal conversion effect compared to a linear counterpart. Laser irradiation of the coiled PDA-LNT hybrid induced a morphological change and subsequent release of the encapsulated guest molecule. In cellular experiments, the coiled PDA-LNT efficiently eliminated HeLa cells because of its strong affinity with the tumor cells. This work illustrates the first approach to construct characteristic morphologies of PDA nanofibers using LNTs as simple templates, and the coiled PDA-LNT hybrid exhibits attractive photothermal features derived from its unique coiled shape.

Spontaneous nematic alignment of a lipid nanotube in aqueous solutions.

The dispersibility and liquid crystal formation of a self-assembled lipid nanotube (LNT) was investigated in a variety of aqueous solutions. As the lipid component, we chose a bipolar lipid with glucose and tetraglycine headgroups, which self-assembled into an LNT with a small outer diameter of 16 to 17 nm and a high axial ratio of more than 310. The LNT gave a stable colloidal dispersion in its dilute solutions and showed spontaneous liquid crystal (LC) alignment at relatively low concentrations and in a pH region including neutral pH. The LNT samples with shorter length distributions were prepared by sonication, and the relationship between the LNT axial ratio and the minimum LC formation concentration was examined. The robustness of the LNT made the liquid crystal stable in mixed solvents of water/ethanol, water/acetone, and water/tetrahydrofuran (1:1 by volume) and at a temperature of up to 90 °C in water. The observed colloidal behavior of the LNT was compared to those of similar 1D nanostructures such as a phospholipid tubule.

Effects of PEGylation on the physicochemical properties and in vivo distribution of organic nanotubes.

Application of organic nanotubes (ONTs) into drug nanocarriers ultimately requires validation in live animals. For improving the dispersibility in biological media and in vivo distribution, the outer surface of an ONT was functionalized with polyethylene glycol (PEG) via the coassembly of an ONT-forming lipid with 5-20 mol% of a PEG-tethered lipid analogue (PEG-lipid). Firstly, the effect of PEGylation on the psysicochemical properties of ONTs, such as morphology and dispersibility, was investigated. PEGylation of ONTs slightly reduced the average length and effectively prevented the aggregation in phosphate-buffered saline (PBS). The PEGylated ONTs even showed high thermal stability in aqueous dispersion at least up to 95°C. Secondly, differential scanning calorimetry and powder X-ray diffraction indicated that ~10 mol% of PEG-lipid was completely incorporated into the ONTs, while 20 mol% of PEG-lipid encountered a partial phase separation during coassembly. In the heating differential scanning calorimetry runs, the resultant PEGylated ONTs with 5 mol% PEG-lipid showed no sign of phase separation up to 180°C under lyophilized condition, while those with 10 mol% and 20 mol% PEG-lipid showed some phase separation of the PEG-lipid above 120°C. Finally, PEGylation significantly affected the tissue distribution and prolonged the persistence time in the blood in mice. Non-PEGylated ONTs was quickly cleared from the circulation after intravenous infusion and preferentially accumulated in the lung, while PEGylated ONTs was mainly trapped in the liver and could circulate in the blood up to 24 hours. This study provided valuable information of physicochemical properties and the in vivo distribution behavior of PEGylated ONTs for their potential application into drug nanocarriers.

Aqueous gel formation from sodium salts of cellobiose lipids.

Cellobiose lipids (CLs) are asymmetric bolaform biosurfactants, which are produced by Cryptococcus humicola JCM 10251 and have fungicidal activity. In this study, the sodium salts of CLs (CLNa) were prepared to improve aqueous solubility of the CLs, and their surface and gelation properties in aqueous solutions were examined by surface tension, rheology, and freeze-fracture transmission electron microscopy (FF-TEM) measurements. The surface tension measurements revealed that the CLNa have high surface activity: CMC1 and γCMC1 are 0.1 mg/mL and 34.7 mN/m, respectively. It was also found that the CLNa form giant micelles above their CMC, whose average size is 116.6 ± 31.9 nm. Unlike conventional surfactants, the surface tension reduced further with an increase in concentration and the aqueous solution became viscous at the minimum gelation concentration (MGC: 5.0 mg/mL). In rheological studies, the obtained gels proved to be rather soft and their sol-gel temperature was found to be approximately 50℃. FF-TEM observation of the gels showed 3D supramolecular structures with an entangled fibrous network. Since the present CLNa aqueous gels have a degree of fungicidal activity, they could be useful for novel multifunctional soft materials applicable to the food and cosmetic industries.

Directed assembly of optoelectronically active alkyl-π-conjugated molecules by adding n-alkanes or π-conjugated species.

Supramolecular assembly can yield ordered structures by taking advantage of the cumulative effect of multiple non-covalent interactions between adjacent molecules. The thermodynamic origin of many self-assembled structures in water is the balance between the hydrophilic and hydrophobic segments of the molecule. Here, we show that this approach can be generalized to use solvophobic and solvophilic segments of fully hydrophobic alkylated fullerene molecules. Addition of n-alkanes results in their assembly--due to the antipathy of C60 towards n-alkanes--into micelles and hexagonally packed gel-fibres containing insulated C60 nanowires. The addition of pristine C60 instead directs the assembly into lamellar mesophases by increasing the proportion of π-conjugated material in the mixture. The assembled structures contain a large fraction of optoelectronically active material and exhibit comparably high photoconductivities. This method is shown to be applicable to several alkyl-π-conjugated molecules, and can be used to construct organized functional materials with π-conjugated sections.

A hydro/organo/hybrid gelator: a peptide lipid with turning aspartame head groups.

This work presents a novel bola-type peptide lipid which can gelate water, organic solvents, and water/organic-solvent mixtures. In its molecular structure, an amphiphilic dipeptide aspartame (L-α-aspartyl-L-phenylalanine methyl ester) is connected at both ends of an alkylene linker. The different morphologies in the hydrogel (helical nanotapes) and the organogel (tape-like nanostructures) were visualized by energy-filtering transmission electron microscopy (EF-TEM) and energy-filtering scanning electron microscopy (FE-SEM), and the molecular arrangement was examined using X-ray diffraction (XRD), infrared (IR) spectroscopy, and circular dichroism (CD) spectroscopy. Possessing a hydrophilic aspartic acid group and a (relatively) hydrophobic phenylalanine methyl ester group, the dipeptide head group can turn about in response to solvent polarity. As a consequence, the solvent condition changed the molecular packing of the gelator and affected the overall supramolecular structure of the gel. It is noted that the peptide lipid gelated mixed solvents of water and organic solvents such as dichloromethane, liquid-paraffin, olive-oil, silicone-oils, and so on. The present hybrid gel can simultaneously hold hydrophilic and hydrophobic functional materials.

Hybrid organic nanotubes with dual functionalities localized on cylindrical nanochannels control the release of doxorubicin.

A method to control the release of the anti-cancer drug doxorubicin (Dox) from cylindrical nanocapsules, known as organic nanotubes (ONTs), is reported. Co-assembly of a tube-forming glycolipid and its hydrophobized analogue yield novel ONTs with both -COOH and hydrophobic benzyloxycarbonyl groups localized on cylindrical nanochannels. The hydrophobicity of the ONTs nanochannels is easily tunable by adjusting the mixing ratio of the two glycolipids in the co-assembly process. The resultant biologically stable ONTs are able to capture Dox with high efficiency into the cylindrical nanochannels via ion complexation between cationic Dox and anionic -COO(-) , and the release of Dox from hybrid ONTs is effectively controlled by tuning the electrostatic interaction and the hydrophobicity. This controlled release by tuning the hydrophobicity of the ONTs' nanochannels greatly reduces the cytotoxicity of Dox@ONTs for HeLa cells.

Cisplatin-encapsulated organic nanotubes by endo-complexation in the hollow cylinder.

A bipolar glycolipid self-assembles into organic nanotubes upon its chelation with an anticancer drug cis-dichlorodiamineplatinum(II) (CDDP). The facile synthesis of glycolipid, chelation-assisted formation of the nanotubes, and efficient loading and prolonged release of CDDP demonstrate a new approach to high-axial supramolecular drug nanocarriers.

A reevaluation of the epimeric and anomeric relationship of glucosides and galactosides in thermotropic liquid crystal self-assemblies.

Anomers and epimers α- and ß-gluco and -galactosides are expected to behave differently. However, recent results on a series of Guerbet glycosides have indicated similar liquid crystal clearing temperatures for pure ß-glucosides and the corresponding α-galactosides. This observation has led to speculation on similarities in the self-assembly interactions between the two systems, attributed to the trans-configuration of the 4-OH group and the hydrophobic aglycon. Previous simulations on related bilayers systems support this hypothesis, by relating this clearing transition temperature to intralayer (sugar-sugar) hydrogen bonding. In order to confirm the hypothesis, the comparison was expanded to include the cis-configurated pair, that is, α-gluco/ß-galactoside. A set of α-configurated Guerbet glucosides as well as octyl α-galactoside were prepared and their thermotropic phase behavior studied. The data obtained enabled a complete comparison of the isomers of interest. While the results in general are in line with a pairing of the stereo-isomers according to the indicated cis/trans-configuration, differences within the pairs can be explained based on the direction of hydrogen bonds from a simple modeling study.

Functionalized organic nanotubes as tubular nonviral gene transfer vector.

Tubular nanomaterials are expected to represent a novel nonviral gene transfer vectors due to the unique morphology and potential biological functionalities. Here we rationally constructed functionalized organic nanotubes (ONTs) for gene delivery through the co-assembly of bipolar glycolipid, arginine-lipid and PEG-lipid. The arginine- and PEG-functionalized ONTs efficiently formed complexes with plasmid DNA without aggregation, and protect DNA from enzymatic degradation; while the arginine-functionalized ONTs aggregated with DNA as large bundles. Long ONTs exceeding 1µm in length was rarely taken up into the cells, while those with a length of 400-800nm could effectively deliver plasmid DNA into cells and induce high transgene expression of green fluorescense protein. This study demonstrated the usefulness of functionalized ONT in gene delivery, and the functionalized ONT represents a novel type of tubular nonviral gene transfer vector.

Buffers to suppress sodium dodecyl sulfate adsorption to polyethylene oxide for protein separation on capillary polymer electrophoresis.

Although polyethylene oxide (PEO) offers several advantages as a sieving polymer in SDS capillary polymer electrophoresis (SDS-CPE), solution properties of PEO cause deterioration in the electrophoresis because PEO in solution aggregates itself, degrades into smaller pieces, and forms polymer-micelle complexes with SDS. We examined protein separation on SDS-CPE with PEO as a sieving matrix in four individual buffer solutions: Tris-CHES, Tris-Gly, Tris-Tricine, and Tris-HCl buffers. The solution properties of PEO as a sieving matrix in those buffers were examined by dynamic light scattering (DLS) and by surface tension. Preferential SDS adsorption onto PEO disturbed protein-SDS complexation and impaired the protein separation efficiency. Substantial adsorption of SDS to PEO was particularly observed in Tris-Gly buffer. The Tris-CHES buffer prevented SDS from adsorbing onto the PEO. Only Tris-CHES buffer achieved separation of six proteins. This study demonstrated efficient protein separation on SDS-CPE with PEO.