RESUMO
Polymers with cyclic topology have no terminal structure and, therefore, exhibit various unique physical and functional properties compared to those of linear analogs. In this paper, we report an innovative methodology for the synthesis of cyclic polymers via ring-expansion RAFT (RE-RAFT) polymerization of vinyl monomers using a cyclic trithiocarbonate derivative (CTTC) as a RAFT agent. RE-RAFT of tert-butyl acrylate (TBA) was performed to yield a mixture of polymers exhibiting a bimodal size exclusion chromatography (SEC) trace. Both the peak top molecular weights shifted to higher-molecular-weight regions as the monomer conversion increased. The structure of the resulting polymer mixture was examined by 1H NMR and MALDI-TOF-MS. Detailed studies indicated that the obtained polymer of higher molecular weight was one of the large-sized cyclic polymers generated by the fusion of smaller-sized cyclic polymers during the RE-RAFT polymerization process. This approach opens the door to the simple synthesis of well-controlled cyclic polymers with complex structures, such as alternating and multi-block repeat unit sequences.
RESUMO
Here we report the controlled synthesis of alternating copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization of hydroxy-functionalized vinyl ether (DEGV) and ethylmaleimide (EtMI) using dithiocarbonate derivative (CPDB) as the RAFT reagent. The resulting alternating copolymer poly[ethylmaleimide-alt-(diethylene glycol mono vinyl ether)] (poly(MalMI-alt-DEGV)) had a relatively narrow molecular weight distribution (Mw/Mn < 1.4). These polymers are fully soluble in cold water (5 °C) and an aqueous solution of poly(MalMI-alt-DEGV) became turbid upon heating (using an incident wavelength of 600 nm and 1.0 mg mL-1 (0.1 wt %) polymer concentration), indicating phase separation above the cloud point temperature (Tcp). The Tcp of the polymer solution ranged from 15-35 °C, depending on the molecular weight and molecular weight distribution of the polymer.
RESUMO
We newly designed a functionalized monomer (PhAVE-AcOH) containing a phenylacetylene (PhA) group and a 1-(acetoxy)ethoxy group, the latter of which is expected to act as an initiator moiety in combination with Lewis acid-based activators under living cationic polymerization conditions. A polyPhA-based multifunctional initiator poly(PhAVE-AcOH) with a narrow molecular weight distribution (M w/M n = 1.02) was synthesized by Rh complex-mediated living coordination polymerization of PhAVE-AcOH. Then, living cationic graft polymerization of isobutyl vinyl ether (IBVE) was performed employing the pendant 1-(acetoxy) ethoxy initiating moiety of poly(PhAVE-AcOH) to form polyIBVE-grafted polyPhA(polyPhA-g-polyIBVE), where both the main chain and side chains possessed well-controlled structures (M w/M n = 1.05-1.10). We found that UV-vis absorption spectra of polyPhA-g-polyIBVE were progressively redshifted with increasing molecular weights of the graft chain.
RESUMO
This study concerned the controlled synthesis of periodic glycopolymers by reversible addition-fragmentation chain transfer (RAFT) copolymerization. To this end, maltose- and lactose-substituted vinyl ethers (MalVE and LacVE, respectively) and maltose-substituted maleimide (MalMI) were newly synthesized. RAFT copolymerization of MalVE and ethyl maleimide (EtMI) (monomer feed ratio: MalVE:EtMI = 1:1) afforded periodic glycopolymers (poly(MalVE-co-EtMI)) consisting of major parts of alternating structure (-(MalVE-EtMI)n-) and a small part of consecutive sequences of EtMI (â»EtMI-EtMI-). Occurrence of the latter sequences was caused by the homopolymerizability of maleimide under the present polymerization condition, and the formation of the consecutive sequences of EtMI was successfully suppressed by varying the monomer feed ratio. RAFT copolymerization of LacVE and EtMI was also found to proceed and similarly yielded periodic glycopolymers (poly(LacVE-co-EtMI)). Moreover, RAFT copolymerization of LacVE and MalMI (monomer feed ratio: LacVE:MalMI = 1:1) was performed to give copolymers (poly(LacVE-co-MalMI)) having composition ratio of LacVE/MalMI ≈ 36/64. The resultant periodic glycopolymers poly(MalVE-co-EtMI) and poly(LacVE-co-EtMI) were subjected to lectin binding assay using concanavalin A and peanut agglutinin, exhibiting the glycocluster effect. Moreover, these glycopolymers obtained from the copolymerization of VE and MI were found to be non-cytotoxic.
RESUMO
Polymer particles modified with carbohydrates on their surfaces are of significant interest, because their specific recognition abilities to biomolecules are valuable for developing promising materials in biomedical fields. Carbohydrate-decorated core-shell polymer particles are expected to be efficiently prepared by dispersion polymerization using a glycopolymer-based amphiphilic macromonomer as both a polymeric steric stabilizer and a monomer. To create glycopolymer-type macromonomers, we propose a new strategy combining living cationic polymerization of an alkynyl-functionalized vinyl ether (VE), and the click reaction for the preparation of glycopolymers having a polymerizable terminal group, and investigate their dispersion copolymerization with styrene for generating carbohydrate-decorated polymer particles. This study deals with (i) the synthesis of block copolymer-type amphiphilic macromonomers bearing a methacryloyl group at the α-terminus, and pendant alkynyl groups by living cationic polymerization of alkynyl-substituted VE (VEEP), (ii) the derivatization of maltose-carrying macromonomers by click chemistry of the pendant alkynyl groups of the precursor macromonomers with maltosyl azide without any protecting/deprotecting processes, and (iii) the preparation of maltose-decorated (Mal-decorated) polymer particles through the dispersion copolymerization of glycopolymer-type macromonomers with styrene in polar media. Moreover, this study concerns the specific interactions of the resultant polymer particles with the lectin concanavalin A (Con A).
Assuntos
Carboidratos/síntese química , Polímeros/síntese química , Tensoativos/química , Carboidratos/química , Substâncias Macromoleculares/química , Estrutura Molecular , Tamanho da Partícula , Polímeros/química , Propriedades de SuperfícieRESUMO
C60-end-capped polymers consisting of an amphiphilic poly(2-methoxyethyl vinyl ether) (PMOVE) main chain were synthesized by living cationic polymerization using a C60-functionalized initiator (C60VE-TFA) in the presence of EtAlCl2 as an activator and dioxane as an added base. The obtained polymers (C60-PMOVE) dissolved in a wide range of solvents including water and exhibited solvatochromism depending on the polarity of the media employed. This phenomenon was attributed to self-assembly in polar media due to hydrophobicity of the C60 moieties at the terminus of the amphiphilic polymer chain. Furthermore, the addition of γ-cyclodextrin (γ-CD), a strong host molecule for fullerenes, to the self-assembled system brought about the dissociation of the aggregates into molecularly dispersed free polymer chains. Titration of the aqueous solution of the self-assembly of C60-PMOVE with γ-CD indicated the possible formation of inclusion complexes of C60-PMOVE and γ-CD, and this binding process occurs in a positive cooperative manner.
Assuntos
Fulerenos/química , Compostos de Vinila/química , gama-Ciclodextrinas/química , Modelos Moleculares , Estrutura Molecular , Tensoativos/síntese química , Tensoativos/química , Água/químicaRESUMO
Chitin fibres constituting a non-woven fabric were carboxymethylated in monochloro acetic acid and treated with saturated Ca(OH)(2) aqueous solution. Within 3 days in a simulated body fluid with pH value and ion concentrations nearly equal to those of human blood plasma, a bonelike apatite layer formed on the surface of fibres of the treated fabric. The apatite-chitin fibre composite thus prepared is expected to be useful as a flexible bioactive bone-repairing material.
Assuntos
Apatitas/síntese química , Materiais Biocompatíveis/química , Líquidos Corporais/química , Quitina/química , Quitina/ultraestrutura , Adsorção , Materiais Biomiméticos/química , Carbono/química , Teste de Materiais , Metilação , Propriedades de Superfície , Têxteis/análiseRESUMO
An ethylene-vinyl alcohol copolymer (EVOH) was treated with a silane coupling agent and calcium silicate solutions, and then soaked in a simulated body fluid (SBF) with ion concentrations approximately equal to those of human blood plasma. A smooth and uniform bonelike apatite layer was successfully formed on both the EVOH plate and the EVOH-knitted fibers in SBF within 2 days. Part of the structure of the resulting apatite-EVOH fiber composite was similar to that of natural bone. If this kind of composite can be fabricated into a three-dimensional structure similar to natural bone, the resultant composite is expected to exhibit both mechanical properties analogous to those of natural bone and bone-bonding ability. Hence, it has great potential as a bone substitute.