Relativistic ultrafast electron diffraction at high repetition rates.

The ability to resolve the dynamics of matter on its native temporal and spatial scales constitutes a key challenge and convergent theme across chemistry, biology, and materials science. The last couple of decades have witnessed ultrafast electron diffraction (UED) emerge as one of the forefront techniques with the sensitivity to resolve atomic motions. Increasingly sophisticated UED instruments are being developed that are aimed at increasing the beam brightness in order to observe structural signatures, but so far they have been limited to low average current beams. Here, we present the technical design and capabilities of the HiRES (High Repetition-rate Electron Scattering) instrument, which blends relativistic electrons and high repetition rates to achieve orders of magnitude improvement in average beam current compared to the existing state-of-the-art instruments. The setup utilizes a novel electron source to deliver femtosecond duration electron pulses at up to MHz repetition rates for UED experiments. Instrument response function of sub-500 fs is demonstrated with < 100 fs time resolution targeted in future. We provide example cases of diffraction measurements on solid-state and gas-phase samples, including both micro- and nanodiffraction (featuring 100 nm beam size) modes, which showcase the potential of the instrument for novel UED experiments.

Near-Monochromatic Tuneable Cryogenic Niobium Electron Field Emitter.

Creating, manipulating, and detecting coherent electrons is at the heart of future quantum microscopy and spectroscopy technologies. Leveraging and specifically altering the quantum features of an electron beam source at low temperatures can enhance its emission properties. Here, we describe electron field emission from a monocrystalline, superconducting niobium nanotip at a temperature of 5.9 K. The emitted electron energy spectrum reveals an ultranarrow distribution down to 16 meV due to tunable resonant tunneling field emission via localized band states at a nanoprotrusion's apex and a cutoff at the sharp low-temperature Fermi edge. This is an order of magnitude lower than for conventional field emission electron sources. The self-focusing geometry of the tip leads to emission in an angle of 3.7°, a reduced brightness of 3.8×10^{8} A/(m^{2} sr V), and a stability of hours at 4.1 nA beam current and 69 meV energy width. This source will decrease the impact of lens aberration and enable new modes in low-energy electron microscopy, electron energy loss spectroscopy, and high-resolution vibrational spectroscopy.

Electron transport and visible light absorption in a plasmonic photocatalyst based on strontium niobate.

Semiconductor compounds are widely used for photocatalytic hydrogen production applications, where photogenerated electron-hole pairs are exploited to induce catalysis. Recently, powders of a metallic oxide (Sr1-xNbO3, 0.03

Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass.

Fluctuation electron microscopy of bulk metallic glasses of CuZrAl(Ag) demonstrates that medium-range order is sensitive to minor compositional changes. By analyzing nanodiffraction patterns medium-range order is detected with crystal-like motifs based on the B2 CuZr structure and its distorted structures resembling the martensitic ones. This result demonstrates some structural homology between the metallic glass and its high temperature crystalline phase. The amount of medium-range order seems slightly affected with increasing Ag concentration (0, 2, 5 at.%) but the structural motifs of the medium-range ordered clusters become more diverse at the highest Ag concentration. The decrease of dominant clusters is consistent with the destabilization of the B2 structure measured by calorimetry and accounts for the increased glass-forming ability.

In situ TEM Raman spectroscopy and laser-based materials modification.

We present a modular assembly that enables both in situ Raman spectroscopy and laser-based materials processing to be performed in a transmission electron microscope. The system comprises a lensed Raman probe mounted inside the microscope column in the specimen plane and a custom specimen holder with a vacuum feedthrough for a tapered optical fiber. The Raman probe incorporates both excitation and collection optics, and localized laser processing is performed using pulsed laser light delivered to the specimen via the tapered optical fiber. Precise positioning of the fiber is achieved using a nanomanipulation stage in combination with simultaneous electron-beam imaging of the tip-to-sample distance. Materials modification is monitored in real time by transmission electron microscopy. First results obtained using the assembly are presented for in situ pulsed laser ablation of MoS2 combined with Raman spectroscopy, complimented by electron-beam diffraction and electron energy-loss spectroscopy.

Evaluation of DNA methylation at imprinted DMRs in the spermatozoa of oligozoospermic men in association with MTHFR C677T genotype.

Altered DNA methylation has been previously identified in the spermatozoa of infertile men; however, the origins of these errors are poorly understood. DNA methylation is an epigenetic modification which is thought to play a fundamental role in male germline development. DNA methylation reactions rely on the cellular availability of methyl donors, which are primarily products of folate metabolism, where a key enzyme is methylenetetrahydrofolate reductase (MTHFR). The MTHFR C677T single nucleotide polymorphism (SNP) reduces enzyme activity and may potentially alter DNA methylation processes during germline development. The objective of this study was to determine whether altered DNA methylation in spermatozoa is associated with the MTHFR C677T SNP. DNA methylation was evaluated at the H19, IG-GTL2, and MEST imprinted differentially methylated regions in the spermatozoa of 53 men - 44 oligozoospermic men and nine fertile men with normal sperm parameters via bisulfite sequencing of sperm clones. The 44 infertile men were stratified by severity of oligozoospermia - three normal (>15 million spermatozoa/mL), eight moderate (5-15 million spermatozoa/mL), 23 severe (1-5 million spermatozoa/mL), and 10 very severe (<1 million spermatozoa/mL). MTHFR C677T SNP genotyping was conducted in a subset of 44 peripheral blood samples via restriction fragment length polymorphism. A total of three men - severe oligozoospermic and CT genotype - were found to be altered, which is defined as having ≥50% of their clones altered, where an altered clone was in turn defined as ≥50% of CpGs with incorrect DNA methylation patterns. The incidence of three altered men within the CT subgroup, however, was not significantly higher than the incidence in the CC subgroup. Taken together, altered DNA methylation in spermatozoa was not significantly associated with the MTHFR C677T SNP; however, there was a trend for higher incidence of alterations among severe oligozoospermic infertile men with CT genotypes.

Evaluation of neon focused ion beam milling for TEM sample preparation.

Gallium-based focused ion beams generated from liquid-metal sources are widely used in micromachining and sample preparation for transmission electron microscopy, with well-known drawbacks such as sample damage and contamination. In this work, an alternative (neon) focused ion beam generated by a gas field-ionization source is evaluated for the preparation of electron-transparent specimens. To do so, electron-transparent sections of Si and an Al alloy are prepared with both Ga and Ne ion beams for direct comparison. Diffraction-contrast imaging and energy dispersive x-ray spectroscopy are used to evaluate the relative damage induced by the two beams, and cross-sections of milled trenches are examined to compare the implantation depth with theoretical predictions from Monte Carlo simulations. Our results show that for the beam voltages and materials systems investigated, Ne ion beam milling does not significantly reduce the focused ion beam induced artefacts. However, the Ne ion beam does enable more precise milling and may be of interest in cases where Ga contamination cannot be tolerated.

Highly mobile ferroelastic domain walls in compositionally graded ferroelectric thin films.

Domains and domain walls are critical in determining the response of ferroelectrics, and the ability to controllably create, annihilate, or move domains is essential to enable a range of next-generation devices. Whereas electric-field control has been demonstrated for ferroelectric 180° domain walls, similar control of ferroelastic domains has not been achieved. Here, using controlled composition and strain gradients, we demonstrate deterministic control of ferroelastic domains that are rendered highly mobile in a controlled and reversible manner. Through a combination of thin-film growth, transmission-electron-microscopy-based nanobeam diffraction and nanoscale band-excitation switching spectroscopy, we show that strain gradients in compositionally graded PbZr1-xTixO3 heterostructures stabilize needle-like ferroelastic domains that terminate inside the film. These needle-like domains are highly labile in the out-of-plane direction under applied electric fields, producing a locally enhanced piezoresponse. This work demonstrates the efficacy of novel modes of epitaxy in providing new modalities of domain engineering and potential for as-yet-unrealized nanoscale functional devices.

Observation of polar vortices in oxide superlattices.

The complex interplay of spin, charge, orbital and lattice degrees of freedom provides a plethora of exotic phases and physical phenomena. In recent years, complex spin topologies have emerged as a consequence of the electronic band structure and the interplay between spin and spin-orbit coupling in materials. Here we produce complex topologies of electrical polarization--namely, nanometre-scale vortex-antivortex (that is, clockwise-anticlockwise) arrays that are reminiscent of rotational spin topologies--by making use of the competition between charge, orbital and lattice degrees of freedom in superlattices of alternating lead titanate and strontium titanate layers. Atomic-scale mapping of the polar atomic displacements by scanning transmission electron microscopy reveals the presence of long-range ordered vortex-antivortex arrays that exhibit nearly continuous polarization rotation. Phase-field modelling confirms that the vortex array is the low-energy state for a range of superlattice periods. Within this range, the large gradient energy from the vortex structure is counterbalanced by the corresponding large reduction in overall electrostatic energy (which would otherwise arise from polar discontinuities at the lead titanate/strontium titanate interfaces) and the elastic energy associated with epitaxial constraints and domain formation. These observations have implications for the creation of new states of matter (such as dipolar skyrmions, hedgehog states) and associated phenomena in ferroic materials, such as electrically controllable chirality.

Electronic Origins of Anomalous Twin Boundary Energies in Hexagonal Close Packed Transition Metals.

Density-functional-theory calculations of twin-boundary energies in hexagonal close packed metals reveal anomalously low values for elemental Tc and Re, which can be lowered further by alloying with solutes that reduce the electron per atom ratio. The anomalous behavior is linked to atomic geometries in the interface similar to those observed in bulk tetrahedrally close packed phases. The results establish a link between twin-boundary energetics and the theory of bulk structural stability in transition metals that may prove useful in controlling mechanical behavior in alloy design.

Vanadium dioxide nanowire-based microthermometer for quantitative evaluation of electron beam heating.

Temperature measurement is critical for many technological applications and scientific experiments, and different types of thermometers have been developed to detect temperature at macroscopic length scales. However, quantitative measurement of the temperature of nanostructures remains a challenge. Here, we show a new type of microthermometer based on a vanadium dioxide nanowire. Its mechanism is derived from the metal-insulator transition of vanadium dioxide at 68 °C. As our results demonstrate, this microthermometer can serve as a thermal flow meter to investigate sample heating from the incident electron beam using a transmission electron microscope. Owing to its small size the vanadium dioxide nanowire-based microthermometer has a large measurement range and high sensitivity, making it a good candidate to explore the temperature environment of small spaces or to monitor the temperature of tiny, nanoscale objects.

Large duplication in MTM1 associated with myotubular myopathy.

Myotubular myopathy is a subtype of centronuclear myopathy with X-linked inheritance and distinctive clinical and pathologic features. Most boys with myotubular myopathy have MTM1 mutations. In remaining individuals, it is not clear if disease is due to an undetected alteration in MTM1 or mutation of another gene. We describe a boy with myotubular myopathy but without mutation in MTM1 by conventional sequencing. Array-CGH analysis of MTM1 uncovered a large MTM1 duplication. This finding suggests that at least some unresolved cases of myotubular myopathy are due to duplications in MTM1, and that array-CGH should be considered when MTM1 sequencing is unrevealing.

Investigation of confined placental mosaicism by CGH in IVF and ICSI pregnancies.

BACKGROUND: Assisted reproductive technologies include in-vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI). It has been shown that embryos derived from ART have higher rates of aneuploidy. Although the majority of ART pregnancies are genetically normal, it is suspected that aneuploid embryos may persist as mosaics and lead to confined placental mosaicism (CPM). Due to the greater risks of sperm aneuploidy in infertile men, CPM may be more prevalent in ICSI than IVF pregnancies. In this report, we investigated the prevalence of CPM in IVF and ICSI pregnancies using comparative genomic hybridization and flow cytometry. METHODS: The placenta and umbilical cord blood were collected after birth. To determine the presence of CPM, karyotypes of umbilical cord blood were compared to the results of placental analyses. For each placenta, multiple villous sites were investigated for DNA gains/losses and polyploidy using comparative genomic hybridization and flow cytometry. Detected abnormalities were further confirmed by fluorescent in-situ hybridization (FISH). RESULTS: In total, 134 IVF/ICSI cases were investigated. CPM was detected in five of these cases (5/134) giving an overall rate of 3.73%. CPM was detected in one IVF case (1/31; 3.23%) and four ICSI cases (4/103; 3.88%). The prevalence of CPM in IVF and ICSI pregnancies was not statistically different from each other. CPM was not observed in 13 ICSI and 6 IVF cases that were determined to be small for gestational age (SGA). CONCLUSIONS: The prevalence of CPM in ICSI pregnancies is not greater than IVF pregnancies. In addition, the overall prevalence of CPM in ART pregnancies (IVF and ICSI) is similar to that of the general population. CPM was not observed in the limited cases that were affected by small for gestational age. Our results suggest that ART pregnancies are not at a greater risk for CPM.

Mechanics and dynamics of the strain-induced M1-M2 structural phase transition in individual VO2 nanowires.

The elastic properties and structural phase transitions of individual VO(2) nanowires were studied using an in situ push-to-pull microelectromechanical device to realize quantitative tensile analysis in a transmission electron microscope and a synchrotron X-ray microdiffraction beamline. A plateau was detected in the stress-strain curve, signifying superelasticity of the nanowire arising from the M1-M2 structural phase transition. The transition was induced and controlled by uniaxial tension. The transition dynamics were characterized by a one-dimensionally aligned domain structure with pinning and depinning of the domain walls along the nanowire. From the stress-strain dependence the Young's moduli of the VO(2) M1 and M2 phases were estimated to be 128 ± 10 and 156 ± 10 GPa, respectively. Single pinning and depinning events of M1-M2 domain wall were observed in the superelastic regime, allowing for evaluation of the domain wall pinning potential energy. This study demonstrates a new way to investigate nanoscale mechanics and dynamics of structural phase transitions in general.

Source truncation and exhaustion: insights from quantitative in situ TEM tensile testing.

A unique method for quantitative in situ nanotensile testing in a transmission electron microscope employing focused ion beam fabricated specimens was developed. Experiments were performed on copper samples with minimum dimensions in the 100-200 nm regime oriented for either single slip or multiple slip, respectively. We observe that both frequently discussed mechanisms, truncation of spiral dislocation sources and exhaustion of defects available within the specimen, contribute to high strengths and related size-effects in small volumes. This suggests that in the submicrometer range these mechanisms should be considered simultaneously rather than exclusively.

In situ nanocompression testing of irradiated copper.

Increasing demand for energy and reduction of carbon dioxide emissions has revived interest in nuclear energy. Designing materials for radiation environments necessitates a fundamental understanding of how radiation-induced defects alter mechanical properties. Ion beams create radiation damage efficiently without material activation, but their limited penetration depth requires small-scale testing. However, strength measurements of nanoscale irradiated specimens have not been previously performed. Here we show that yield strengths approaching macroscopic values are measured from irradiated ~400 nm-diameter copper specimens. Quantitative in situ nanocompression testing in a transmission electron microscope reveals that the strength of larger samples is controlled by dislocation-irradiation defect interactions, yielding size-independent strengths. Below ~400 nm, size-dependent strength results from dislocation source limitation. This transition length-scale should be universal, but depends on material and irradiation conditions. We conclude that for irradiated copper, and presumably related materials, nanoscale in situ testing can determine bulk-like yield strengths and simultaneously identify deformation mechanisms.

Chemical mapping of a block copolymer electrolyte by low-loss EFTEM spectrum-imaging and principal component analysis.

Energy-filtered transmission electron microscopy spectrum-imaging (EFTEM SI) in the low electron energy-loss range is a valuable technique for probing the chemical structure of a material with nanoscale spatial resolution using a reduced electron dose. By analyzing EFTEM SI datasets using principal component analysis (PCA), the constituent chemical phases of the material can be identified in an efficient manner without prior knowledge of the specimen. We implement low-loss EFTEM SI together with PCA to investigate thin films of the block copolymer electrolyte poly(styrene-block-ethylene oxide) (PS-b-PEO) blended with a sodium salt. PCA identifies three main phases, the first and second phases corresponding to the two blocks of the copolymer and a third phase corresponding to the salt. The low-loss spectra for these phases are extracted from a noise-reduced EFTEM SI dataset and used to generate a chemical map of the material by multiple linear least square fitting. We validate the results of the low-loss EFTEM SI/PCA technique by applying the method to a control PS-b-PEO sample that does not contain the sodium salt, and by conducting spatially resolved X-ray energy-dispersive spectrometry on the salt-containing PS-b-PEO thin film.