Vortex fluidic regulated phospholipid equilibria involving liposomes down to sub-micelle size assemblies.

Conventional channel-based microfluidic platforms have gained prominence in controlling the bottom-up formation of phospholipid based nanostructures including liposomes. However, there are challenges in the production of liposomes from rapidly scalable processes. These have been overcome using a vortex fluidic device (VFD), which is a thin film microfluidic platform rather than channel-based, affording ∼110 nm diameter liposomes. The high yielding and high throughput continuous flow process has a 45° tilted rapidly rotating glass tube with an inner hydrophobic surface. Processing is also possible in the confined mode of operation which is effective for labelling pre-VFD-prepared liposomes with fluorophore tags for subsequent mechanistic studies on the fate of liposomes under shear stress in the VFD. In situ small-angle neutron scattering (SANS) established the co-existence of liposomes ∼110 nm with small rafts, micelles, distorted micelles, or sub-micelle size assemblies of phospholipid, for increasing rotation speeds. The equilibria between these smaller entities and ∼110 nm liposomes for a specific rotational speed of the tube is consistent with the spatial arrangement and dimensionality of topological fluid flow regimes in the VFD. The prevalence for the formation of ∼110 nm diameter liposomes establishes that this is typically the most stable structure from the bottom-up self-assembly of the phospholipid and is in accord with dimensions of exosomes.

Pathway complexity in fibre assembly: from liquid crystals to hyper-helical gelmorphs.

Pathway complexity results in unique materials from the same components according to the assembly conditions. Here a chiral acyl-semicarbazide gelator forms three different gels of contrasting fibre morphology (termed 'gelmorphs') as well as lyotropic liquid crystalline droplets depending on the assembly pathway. The gels have morphologies that are either hyperhelical (HH-Gel), tape-fibre (TF-Gel) or thin fibril derived from the liquid crystalline phase (LC-Gels) and exhibit very different rheological properties. The gelator exists as three slowly interconverting conformers in solution. All three gels are comprised of an unsymmetrical, intramolecular hydrogen bonded conformer. The kinetics show that formation of the remarkable HH-Gel is cooperative and is postulated to involve association of the growing fibril with a non-gelling conformer. This single molecule dynamic conformational library shows how very different materials with different morphology and hence very contrasting materials properties can arise from pathway complexity as a result of emergent interactions during the assembly process.

Structural insights into self-assembly of a slow-evolving and mechanically robust supramolecular gel via time-resolved small-angle neutron scattering.

The supramolecular assembly process is a widespread phenomenon found in both synthetically engineered and naturally occurring systems, such as colloids, liquid crystals and micelles. However, a basic understanding of the evolution of self-assembly processes over time remains elusive, primarily owing to the fast kinetics involved in these processes and the complex nature of the various non-covalent interactions operating simultaneously. With the help of a slow-evolving supramolecular gel derived from a urea-based gelator, we aim to capture the different stages of the self-assembly process commencing from nucleation. In particular, we are able to study the self-assembly in real time using time-resolved small-angle neutron scattering (SANS) at length scales ranging from approximately 30 Å to 250 Å. Systems with and without sonication are compared simultaneously, to follow the different kinetic paths involved in these two cases. Time-dependent NMR, morphological and rheological studies act complementarily to the SANS data at sub-micron and bulk length scales. A hollow columnar formation comprising of gelator monomers arranged radially along the long axis of the fiber and solvent in the core is detected at the very early stage of the self-assembly process. While sonication promotes uniform growth of fibers and fiber entanglement, the absence of such a stimulus helps extensive bundle formation at a later stage and at the microscopic domain, making the gel system mechanically robust. The results of the present work provide a thorough understanding of the self-assembly process and reveal a path for fine-tuning such growth processes for applications such as the cosmetics industry, 3D printing ink development and paint industry.

Structural alterations of branched versus linear mixed-surfactant micellar systems with the addition of a complex perfume mixture and dipropylene glycol as cosolvent.

Personal care products commonly contain perfume mixtures, consisting of numerous perfume raw materials (PRMs), and cosolvents. The lipophilicity and structure of an individual PRM is known to affect its localization within the surfactant self-assembly as well as the micellar geometry. However, because multiple PRMs are used in formulations, significant intermolecular interactions between the PRMs and between the PRMs and the surfactant tail may also influence the location of the PRMs and their effects on the self-assembly. Herein, two anionic/zwitterionic mixed-surfactant systems (sodium trideceth-2 sulfate (ST2S)/cocamidopropyl betaine (CAPB) and sodium laureth-3 sulfate/CAPB) were formulated with a cosolvent (dipropylene glycol (DPG)) and 12 PRMs of varying structures and lipophilicities. This 12 PRM accord is simpler than a fully formulated perfume but more complex than a single perfume molecule. The geometric variations in the self-assemblies were evaluated using small-angle neutron scattering, perfume head space concentrations were determined using gas chromatography-mass spectrometry, and perfume localization was identified using NMR spectroscopy. The addition of the perfume accord caused enlargement of the micelles in both surfactant systems, with a greater change observed for ST2S/CAPB formulations. Furthermore, the addition of DPG to ST2S/CAPB resulted in micelle shrinkage. The micelle geometries and PRM localization in the micelles were affected by the degree of branching in the surfactant tail.

Effects of a Multicomponent Perfume Accord and Dilution on the Formation of ST2S/CAPB Mixed-Surfactant Microemulsions.

Perfume mixtures contain perfume raw materials (PRMs) with varying structures and hydrophobicities, which influence PRM localization within a surfactant-based formulation and thereby affect the phase behavior. In rinse-off products, the addition of water can further affect the phase behavior. In this study, a mixture of 12 PRMs was used as the oil phase in an aqueous system consisting of sodium trideceth-2 sulfate as a primary surfactant, cocamidopropyl betaine as a cosurfactant, and dipropylene glycol as a cosolvent. A series of phase diagrams were constructed with increasing water content, simulating the use conditions for rinse-off products, to determine how the phase boundaries shift with dilution. Using these phase diagrams, the compositions of interest in the micelle without perfume, micelle with perfume, microemulsion, and micelle-microemulsion transition regions were identified at each dilution level. The structural changes were probed through combined small-angle neutron scattering (SANS) and cryo-transmission electron microscopy analyses. The SANS results showed that ellipsoidal micelles were maintained as the perfume content and the dilution level increased. With ≥50 wt % water, increasing the perfume content increased the micelle volume. Interestingly, a higher rate of volume increase was observed at ≥70 wt % water. Notably, the volumes of the micelles with and without perfume increased steadily with dilution, whereas the volumes of the assemblies in the transition region and the microemulsion region increased more rapidly once diluted to 70 and 80 wt % water, respectively.

Manipulating Assemblies in Metallosupramolecular Gels, Driven by Isomeric Ligands, Metal Coordination, and Adaptive Binary Gelator Systems.

Metallosupramolecular gel (MSG) is a unique combination of metal-ligand coordination chemistry and supramolecular gel chemistry with extraordinary adaptivity and softness. Such materials find broad uses in industry, pharmaceutical and biomedical sectors, and in technology generation among many others. Pyridyl-appended bis(urea) gelator systems have been extensively studied as potential MSG-forming materials in the presence of various metal ions. The previous molecular engineering approaches depicted competitive intermolecular and intramolecular binding modes involving urea and pyridyl groups and further fine-tuned by the presence of various molecular spacers. In those studies, formation of intermolecular hydrogen bonding among urea moieties to form urea tape was found to be the key factor in one-dimensional assembly and gel formation. In the present study, we show how two isomeric pyridyl-appended bis(urea) ligands can be designed appropriately to essentially eliminate the interference of competitive factors, leaving the intermolecular urea assembly practically unaffected even in the presence of metal ions. We found that one of the two ligands (L2) and the mixed ligand (L1 + L2) assemblies formed gel in the presence and absence of various metal ions. A metal ion with a linear coordination geometry significantly strengthened the gels. Moreover, an inherently weak L1 + L2 assembly appears to be more adaptive in accommodating larger metal ions especially with nonlinear coordination geometry preferences. Small-angle neutron scattering and rheological, spectroscopic, and morphological characterizations, collectively, capture a detailed interplay among ligand assembly, metal-ligand coordination, and adaptivity, driven by the pure versus mixed ligand assemblies. The knowledge gathered from the present study would be highly beneficial in engineering the metallosupramolecular polymeric assemblies toward their functional applications.

Investigating the effect of a simplified perfume accord and dilution on the formation of mixed-surfactant microemulsions.

The phase analysis of a mixed surfactant system is much more complex than that for a single surfactant system. The addition of fragrance further enhances the complexity of such colloidal systems. The wide variation in structure and log P values of perfume raw materials influence its partitioning into the micellar phase. Herein, we have created a simplified perfume accord consisting of three perfume raw materials (3-PRM) and investigated its loading within a mixed-surfactant system consisting of sodium trideceth-2 sulfate/ST2S and cocamidopropyl betaine/CAPB, along with citric acid and dipropylene glycol. We performed a systematic phase diagram analysis and identified the isotropic phases and compositions of interest. Select compositions from the phase diagram were further investigated to learn how the geometry of the surfactant self-assembly and the localization of the PRMs within the surfactant self-assembly changed when water or perfume is added. A combined small-angle neutron scattering/SANS and NMR methodology was used to identify variation in colloidal domains and positioning of perfume molecules at varying dilutions/rinse off scenarios. The results obtained were utilized to better distinguish distorted micelles from true microemulsions. The systematic investigation here provides a fundamental understanding about the self-assembly, encapsulation and perfume release from a commercially relevant mixed surfactant system.

Vortex fluidic mediated encapsulation of functional fish oil featuring in situ probed small angle neutron scattering.

Major challenges for optimizing the benefits of fish oil on human health are improved bioavailability while overcoming the strong odor and avoiding significant oxidation of the omega-3 polyunsaturated fatty acids (PUFAs). The scalable continuous flow thin film vortex fluidic device (VFD) improves the Tween 20 encapsulation of fish oil relative to conventional homogenization processing, with the fish oil particles significantly smaller and the content of the valuable omega-3 fatty acids higher. In addition, after 14 days storage the remaining omega-3 fatty acids content was higher, from ca 31.0% for raw fish oil to ca 62.0% of freeze-dried encapsulated fish oil. The VFD mediated encapsulated fish oil was used to enrich the omega-3 fatty acid content of apple juice, as a model water-based food product, without changing its sensory values. The versatility of the VFD was further demonstrated in forming homogenous suspensions of fish oil containing water-insoluble bioactive molecules, curcumin and quercetin. We have also captured, for the first time, real-time structural changes in nanoencapsulation by installing a VFD with in in situ small angle neutron scattering. Real-time measurements afford valuable insights about self-assembly in solution.

Differential behavior of sodium laurylsulfate micelles in the presence of nonionic polymers.

HYPOTHESIS: Theory and practice have proven that the cleansing properties and irritation potential of surfactants can be controlled with the addition of co-surfactants or polymers. The size of the surfactant-polymer nanoassembly, which differs from the pure surfactant micelle, has been postulated to be the cause of the differences in a surfactant system's ability to disrupt the skin barrier. However, a firm structure-function relationship connecting polymer and surfactant under a consumer relevant condition is yet to be established. It is therefore hypothesized that apart from the size, the shape and the chemical nature of the polymer might play crucial roles. EXPERIMENTS: We used combined small-angle neutron scattering, nuclear magnetic resonance spectroscopy, tensiometry, and dye solubilization methods to investigate the shape, size, and intermolecular interactions involved in sodium laurylsulfate-based systems in the presence of two industrially important and chemically distinct polymers, polyethylene glycol and polyvinyl alcohol, adopting a consumer relevant protocol. FINDINGS: Apart from size, shape and inter-micellar interactions fine-tuned by the presence of the polymers are found to be the important factors. Secondly, the physicochemical property of the polymer including chemical structure, conformation, hydrophilicity, presence of side groups, all can have crucial influence on polymer-surfactant interaction, micelle formation, and micelle stability.

Investigating the effect of supramolecular gel phase crystallization on gel nucleation.

Supramolecular gel phase crystallization offers a new strategy for drug polymorph screening and discovery. In this method, the crystallization outcome depends on the interaction between solute and gel fibre. While supramolecular gels have shown success in producing new polymorphs and crystals with novel morphologies, role of the gel and nature of gel-solute interaction remains largely unexplored. The present study aims to provide a comprehensive picture of the structural evolution of a supramolecular gel produced from a bis(urea) based gelator (G) in the presence of a polymorphic drug carbamazepine (CBZ). The structural aspects of the gel have been assessed by single crystal X-ray analysis, X-ray powder diffraction (XRPD) and solid state NMR spectroscopy. Small Angle Neutron Scattering (SANS) has been used to follow the changes in gel structure in the presence of CBZ. Visual evidence from morphological study and structural evolution observed at a macroscopic level from rheological measurements, shows good agreement with the SANS results. The concentration of the gelator and the relative proportion of G to CBZ were found to be crucial factors in determining the competitive nucleation events involving gelation and crystallization. At a critical G to CBZ ratio the effect of CBZ on gel structure was maximum and fiber bundling in the gel was found to be critically affected. This study offers important information about how the interplay of gelator assembly and gel-solute interactions can fine-tune the nucleation events in a supramolecular gel phase crystallization.

Phase dependent structural perturbation of a robust multicomponent assembled icosahedral array.

We report on the assembly of three-fold axially compressed icosahedral arrays of the bowl shaped p-sulfonatocalix[4]arene molecules in the solid-state, intricately bound to dipicolinate and yttrium(iii) ions, with the compression reflected in Hirshfeld surface analyses. Solution studies show dissolution of the icosahedra intact, but with a geometrical rearrangement to regular icosahedra.

Bowl-in-bowl complex formation with mixed sized calixarenes: adaptivity towards guest binding.

We demonstrated the organization of two differently sized calixarenes C-methylresorcin[4]arene (RsC1) and either calix[6]arene (Calix6) or calix[8]arene (Calix8), where the lower rim of RsC1 partially overlaps with the upper rim of Calix6 or Calix8. An adaptive nature of the heteromacrocyclic assembly towards the binding of a model guest has been observed.