Xenopus laevis Oocyte Array Fluidic Device Integrated with Microelectrodes for A Compact Two-Electrode Voltage Clamping System.

We report on a compact two-electrode voltage clamping system composed of microfabricated electrodes and a fluidic device for Xenopus laevis oocytes. The device was fabricated by assembling Si-based electrode chips and acrylic frames to form fluidic channels. After the installation of Xenopus oocytes into the fluidic channels, the device can be separated in order to measure changes in oocyte plasma membrane potential in each channel using an external amplifier. Using fluid simulations and experiments, we investigated the success rates of Xenopus oocyte arrays and electrode insertion with respect to the flow rate. We successfully located each oocyte in the array and detected oocyte responses to chemical stimuli using our device.

Efficient Lipid Bilayer Formation by Dipping Lipid-Loaded Microperforated Sheet in Aqueous Solution.

This paper describes a method for a bilayer lipid membrane (BLM) formation using a perforated sheet along with an open chamber. Microscopic observation of the formed membrane showed a typical droplet interface bilayer. We proved that the formed membrane was a BLM based on electrical measurements of the membrane protein α-hemolysin, which produces nanopores in BLMs. Unlike the conventional approach for BLM formation based on the droplet contact method, this method provides aqueous surfaces with no organic solvent coating layer. Hence, this method is suitable for producing BLMs that facilitate the direct addition of chemicals into the aqueous phase.

A Lipid-Bilayer-On-A-Cup Device for Pumpless Sample Exchange.

Lipid-bilayer devices have been studied for on-site sensors in the fields of diagnosis, food and environmental monitoring, and safety/security inspection. In this paper, we propose a lipid-bilayer-on-a-cup device for serial sample measurements using a pumpless solution exchange procedure. The device consists of a millimeter-scale cylindrical cup with vertical slits which is designed to steadily hold an aqueous solution and exchange the sample by simply fusing and splitting the solution with an external solution. The slit design was experimentally determined by the capabilities of both the retention and exchange of the solution. Using the optimized slit, a planar lipid bilayer was reconstituted with a nanopore protein at a microaperture allocated to the bottom of the cup, and the device was connected to a portable amplifier. The solution exchangeability was demonstrated by observing the dilution process of a blocker molecule of the nanopore dissolved in the cup. The pumpless solution exchange by the proposed cup-like device presents potential as a lipid-bilayer system for portable sensing applications.

Construction of a Biohybrid Odorant Sensor Using Biological Olfactory Receptors Embedded into Bilayer Lipid Membrane on a Chip.

This paper describes an odorant sensor based on mosquito olfactory receptors (ORs) that is sensitive to the volatile organic compound octenol. The ORs and OR coreceptors were reconstructed in the lipid bilayer membrane in a chamber device equipped with electrodes. Using this odorant sensor, we obtained ion current changes caused by specific OR responses to octenol. We installed the odorant sensor into a mobile robot and succeeded in the demonstration of coupling octenol gas detection and robot actuation. We believe that this biohybrid odorant sensing system will be a key technology for future artificial olfaction.

Electrophysiological measurement of ion channels on plasma/organelle membranes using an on-chip lipid bilayer system.

Ion channels are located in plasma membranes as well as on mitochondrial, lysosomal, and endoplasmic reticulum membranes. They play a critical role in physiology and drug targeting. It is particularly challenging to measure the current mediated by ion channels in the lysosomal and the endoplasmic reticulum membranes using the conventional patch clamp method. In this study, we show that our proposed device is applicable for an electrophysiological measurement of various types of ion channel in plasma and organelle membranes. We designed an on-chip device that can form multiple electrical contacts with a measurement system when placed on a mount system. Using crude cell membranes containing ion channels extracted from cultured cells without detergents, we detected open/close signals of the hERG, TRPV1, and NMDA channels on plasma membranes, those of the TRPML1 channels on lysosomal membranes, and open/close signals of the RyR channels on SR membranes. This method will provide a highly versatile drug screening system for ion channels expressed by various cell membranes, including plasma, SR, mitochondrial, Golgi, and lysosomal membranes.

Automatic Planar Asymmetric Lipid Bilayer Membrane Formation toward Biological High-Throughput Assay.

This paper describes automation of planar lipid bilayer formation by introducing a stepping motor to a microfluidic device. Planar lipid bilayers or lipid vesicles are useful to understand biological reactions and to investigate the interaction between lipids and proteins. Therefore, to acquire large amount of the information, high-throughput production of planar lipid bilayers or giant vesicles (GVs) is necessary. The droplet split-and-contact method, which enhances the efficiencies of both planar lipid bilayer formation and GV generation, needs to be automated for increasing the throughput. Previous droplet split-and-contact devices were manipulated manually; hence, the influence of manipulation on planar lipid bilayer formation was not evaluated quantitatively. First, to develop an automated system for generating asymmetric planar lipid bilayers, a stepping motor, which allows to control the angular speed of the rotor, is integrated into the droplet split- and-contact device (Fig. $1(\mathrm{b)$). Next, we assessed planar lipid bilayer generation at various angular speeds and found the speed limit for bilayer formation. Finally, we generated asymmetric planar lipid bilayers that have different lipid composition on outer and inner leaflets using this automated device and confirmed the asymmetry of the planar lipid bilayers by generating GVs.

Purification-Free MicroRNA Detection by Using Magnetically Immobilized Nanopores on Liposome Membrane.

MicroRNAs have critical roles in a number of serious diseases and, as a result, are of major interest as clinical diagnostic targets. Conventionally, microRNAs are collected from blood and urine samples and are measured by either quantitative reverse-transcription polymerase chain reaction or microarray. Recently, nanopore sensing techniques have been applied for measuring microRNAs at the single-molecule level. However, existing techniques are technically complex, needing several tools and requiring purification and/or labeling of microRNA samples prior to use. Here we report a method for microRNA detection in a simple procedure requiring neither purification nor labeling. This system utilizes magnetic beads anchored with DNA and nanopores on a liposome membrane. In the presence of the target microRNA, it forms a duplex with complementary DNA, which is then cleaved by a duplex-specific nuclease (DSN). The cleaved DNA, which harbors a liposome on its terminus, is subsequently released from the magnetic bead, fuses to the lipid bilayer on chip, and emits an electrical signal derived from the formation of a nanopore. Because of a property of the DSN, the signals derived from microRNAs are expected to be amplified in an isothermal reaction. Our system possesses the specificity to detect target microRNAs from mixtures containing >106 different microRNA sequences and readily uses blood or urine samples. Although the limit of detection is above 10 nM and needs to be improved for practical diagnosis, because purification and labeling are not required, the presented system proposes a possible schematic for the development of easy and on-site diagnosis.

Membrane protein-based biosensors.

This review highlights recent development of biosensors that use the functions of membrane proteins. Membrane proteins are essential components of biological membranes and have a central role in detection of various environmental stimuli such as olfaction and gustation. A number of studies have attempted for development of biosensors using the sensing property of these membrane proteins. Their specificity to target molecules is particularly attractive as it is significantly superior to that of traditional human-made sensors. In this review, we classified the membrane protein-based biosensors into two platforms: the lipid bilayer-based platform and the cell-based platform. On lipid bilayer platforms, the membrane proteins are embedded in a lipid bilayer that bridges between the protein and a sensor device. On cell-based platforms, the membrane proteins are expressed in a cultured cell, which is then integrated in a sensor device. For both platforms we introduce the fundamental information and the recent progress in the development of the biosensors, and remark on the outlook for practical biosensing applications.

Pesticide vapor sensing using an aptamer, nanopore, and agarose gel on a chip.

A pesticide vapor sensor was developed using an agarose gel-based chip containing a nanopore sensing system. Vaporized omethoate was detected by the absorption into the gel, the complex formation with a DNA aptamer, and its obstruction at the nanopore. This strategy is applicable to other vapors, expanding the versatility of nanopore sensors.

Cell-Based Odorant Sensor Array for Odor Discrimination Based on Insect Odorant Receptors.

The olfactory system of living organisms can accurately discriminate numerous odors by recognizing the pattern of activation of several odorant receptors (ORs). Thus, development of an odorant sensor array based on multiple ORs presents the possibility of mimicking biological odor discrimination mechanisms. Recently, we developed novel odorant sensor elements with high sensitivity and selectivity based on insect OR-expressing Sf21 cells that respond to target odorants by displaying increased fluorescence intensity. Here we introduce the development of an odorant sensor array composed of several Sf21 cell lines expressing different ORs. In this study, an array pattern of four cell lines expressing Or13a, Or56a, BmOR1, and BmOR3 was successfully created using a patterned polydimethylsiloxane film template and cell-immobilizing reagents, termed biocompatible anchor for membrane (BAM). We demonstrated that BAM could create a clear pattern of Sf21 sensor cells without impacting their odorant-sensing performance. Our sensor array showed odorant-specific response patterns toward both odorant mixtures and single odorant stimuli, allowing us to visualize the presence of 1-octen-3-ol, geosmin, bombykol, and bombykal as an increased fluorescence intensity in the region of Or13a, Or56a, BmOR1, and BmOR3 cell lines, respectively. Therefore, we successfully developed a new methodology for creating a cell-based odorant sensor array that enables us to discriminate multiple target odorants. Our method might be expanded into the development of an odorant sensor capable of detecting a large range of environmental odorants that might become a promising tool used in various applications including the study of insect semiochemicals and food contamination.

Construction and structural analysis of tethered lipid bilayer containing photosynthetic antenna proteins for functional analysis.

The construction and structural analysis of a tethered planar lipid bilayer containing bacterial photosynthetic membrane proteins, light-harvesting complex 2 (LH2), and light-harvesting core complex (LH1-RC) is described and establishes this system as an experimental platform for their functional analysis. The planar lipid bilayer containing LH2 and/or LH1-RC complexes was successfully formed on an avidin-immobilized coverglass via an avidin-biotin linkage. Atomic force microscopy (AFM) showed that a smooth continuous membrane was formed there. Lateral diffusion of these membrane proteins, observed by a fluorescence recovery after photobleaching (FRAP), is discussed in terms of the membrane architecture. Energy transfer from LH2 to LH1-RC within the tethered membrane was observed by steady-state fluorescence spectroscopy, indicating that the tethered membrane can mimic the natural situation.

Highly sensitive and selective odorant sensor using living cells expressing insect olfactory receptors.

This paper describes a highly sensitive and selective chemical sensor using living cells (Xenopus laevis oocytes) within a portable fluidic device. We constructed an odorant sensor whose sensitivity is a few parts per billion in solution and can simultaneously distinguish different types of chemicals that have only a slight difference in double bond isomerism or functional group such as -OH, -CHO and -C(=O)-. We developed a semiautomatic method to install cells to the fluidic device and achieved stable and reproducible odorant sensing. In addition, we found that the sensor worked for multiple-target chemicals and can be integrated with a robotic system without any noise reduction systems. Our developed sensor is compact and easy to replace in the system. We believe that the sensor can potentially be incorporated into a portable system for monitoring environmental and physical conditions.