Rhodium-Based Catalysts: An Impact of the Support Nature on the Catalytic Cyclohexane Ring Opening.

Because of the growing demand for high-quality fuels, the light cycle oil fraction improvement including cetane number improvement is important. The main way to reach this improvement is the ring opening of cyclic hydrocarbons, and a highly effective catalyst should be found. Cyclohexane ring openings are a possible option to investigate the catalyst activity. In this work, we investigated rhodium-loaded catalysts prepared using the commercially available industrial supports: single-component ones, SiO2 and Al2O3; and mixed oxides CaO + MgO + Al2O3 and Na2O + SiO2 + Al2O3. The catalysts were prepared by incipient wetness impregnation and investigated by N2 low-temperature adsorption-desorption, XRD, XPS, DRS UV-Vis and DRIFT spectroscopy, SEM, and TEM with EDX. The catalytic tests were performed in cyclohexane ring opening in the range of 275-325 °C. The best result was demonstrated by the sample 1Rh/CaMgAlO: the selectivity to n-hexane was about 75% while the cyclohexane conversion was about 25% at 275 °C. The space-time yield was up to 12 mmoln-hexane gcat-1h-1.

Ethanol to Acetaldehyde Conversion under Thermal and Microwave Heating of ZnO-CuO-SiO2 Modified with WC Nanoparticles.

The nonoxidative conversion of ethanol to acetaldehyde under thermal and microwave heating was studied on mixed oxide ZnO-CuO-SiO2 catalysts modified with additives of tungsten carbide nanoparticles. The results revealed that the WC-modified catalyst exhibited superior activity and selectivity under microwave heating conditions. It is assumed that when microwave heating is used, hot zones can appear at the contact points of WC nanoparticles and active centers of the mixed oxide ZnO-CuO-SiO2 catalyst, which intensively absorb microwave energy, allowing the more efficient formation of acetaldehyde at moderate temperatures. Thermodynamic calculations of equilibrium concentrations of reagents and products allowed us to identify the optimal conditions for effective acetaldehyde production. The initial catalyst and the catalyst prepared by the coprecipitation of the oxides with the addition of WC were characterized by physicochemical methods (TPR-H2, XRD, DRIFTS of adsorbed CO). The active centers of the oxide catalyst can be Cu+ cations.