Semiconductor-metal transition in Bi2Se3 caused by impurity doping.

Doping a typical topological insulator, Bi2Se3, with Ag impurity causes a semiconductor-metal (S-M) transition at 35 K. To deepen the understanding of this phenomenon, structural and transport properties of Ag-doped Bi2Se3 were studied. Single-crystal X-ray diffraction (SC-XRD) showed no structural transitions but slight shrinkage of the lattice, indicating no structural origin of the transition. To better understand electronic properties of Ag-doped Bi2Se3, extended analyses of Hall effect and electric-field effect were carried out. Hall effect measurements revealed that the reduction of resistance was accompanied by increases in not only carrier density but carrier mobility. The field-effect mobility is different for positive and negative gate voltages, indicating that the EF is located at around the bottom of the bulk conduction band (BCB) and that the carrier mobility in the bulk is larger than that at the bottom surface at all temperatures. The pinning of the EF at the BCB is found to be a key issue to induce the S-M transition, because the transition can be caused by depinning of the EF or the crossover between the bulk and the top surface transport.

Superconducting properties of BaBi3 at ambient and high pressures.

Herein, we report the preparation and characterization of BaBi3 clarified by DC magnetic susceptibility, powder X-ray diffraction (XRD), and electrical transport. The superconducting properties of BaBi3 were elucidated through the magnetic and electrical transport properties in a wide pressure range. The superconducting transition temperature, Tc, showed a slight decrease (or almost constant Tc) against pressure up to 17.2 GPa. The values of the upper critical field, Hc2, at 0 K, were determined to be 1.27 T at 0 GPa and 3.11 T at 2.30 GPa, using the formula, because p-wave pairing appeared to occur for this material at both pressures, indicating the unconventionality of superconductivity. This result appears to be consistent with the topological non-trivial nature of superconductivity predicted theoretically. The pressure-dependent XRD patterns measured at 0-20.1 GPa indicated no structural phase transitions up to 20.1 GPa, i.e., the structural phase transitions from the α phase to the ß or γ phase which are induced by an application of pressure were not observed, contrary to the previous report, demonstrating that the α phase is maintained over the entire pressure range. Admittedly, the lattice constants and the volume of the unit cell, V, steadily decrease with increasing pressure up to 20.1 GPa. In this study, the plots of Tcversus p and V versus p of BaBi3 are depicted over a wide pressure range for the first time.

Superconducting behavior of BaTi2Bi2O and its pressure dependence.

A new superconducting sample, BaTi2Bi2O, was synthesized and characterized over a wide pressure range. The superconducting transition temperature, Tc, of BaTi2Bi2O was 4.33 K at ambient pressure. The crystal structure was tetragonal (space group of P4/mmm (No. 123)), according to the X-ray diffraction (XRD) pattern at ambient pressure. The XRD pattern was analyzed using the Le Bail method. The magnetic-field dependence of the magnetization at different temperatures was precisely investigated to elucidate the characteristics of the superconductivity. The pressure-dependent XRD patterns showed absence of structural phase transitions up to 19.8 GPa. The superconducting properties of BaTi2Bi2O were investigated under pressure. Tc monotonously increased with the pressure (p) up to 4.0 GPa and saturated above 4.0 GPa. The variations in the Tc-p plot were thoroughly analyzed. The Cooper pair symmetry (or superconducting pairing mechanism) was analyzed based on the magnetic field dependence of the superconductivity at ambient and high pressures, which indicated a sign of p-wave pairing for the superconductivity of BaTi2Bi2O, i.e., topologically nontrivial sign was suggested for BaTi2Bi2O.

A new protocol for the preparation of superconducting KBi2.

A superconducting KBi2 sample was successfully prepared using a liquid ammonia (NH3) technique. The temperature dependence of the magnetic susceptibility (M/H) showed a superconducting transition temperature (T c) as high as 3.6 K. In addition, the shielding fraction at 2.0 K was evaluated to be 87%, i.e., a bulk superconductor was realized using the above method. The T c value was the same as that reported for the KBi2 sample prepared using a high-temperature annealing method. An X-ray diffraction pattern measured based on the synchrotron X-ray radiation was analyzed using the Rietveld method, with a lattice constant, a, of 9.5010(1) Šunder the space group of Fd3̄m (face-centered cubic, no. 227). The lattice constant and space group found for the KBi2 sample using a liquid NH3 technique were the same as those reported for KBi2 through a high-temperature annealing method. Thus, the superconducting behavior and crystal structure of the KBi2 sample obtained in this study are almost the same as those for the KBi2 sample reported previously. Strictly speaking, the magnetic behavior of the superconductivity was different from that of a KBi2 sample reported previously, i.e., the KBi2 sample prepared using a liquid NH3 technique was a type-II like superconductor, contrary to that prepared using a high-temperature annealing method, the reason for which is fully discussed. These results indicate that the liquid NH3 technique is effective and simple for the preparation of a superconducting KBi2. In addition, the topological nature of the superconductivity for KBi2 was not confirmed.