Lysozyme adsorption onto mesoporous materials: effect of pore geometry and stability of adsorbents.

In this paper, adsorption of lysozyme onto two kinds of mesoporous adsorbents (KIT-5 and AISBA-15) has been investigated and the results on the effects of pore geometry and stability of the adsorbents are also discussed. The KIT-5 mesoporous silica materials possess cage-type pore geometry while the AISBA-15 adsorbent has mesopores of cylindrical type with rather large diameter (9.7 nm). Adsorption of lysozyme onto AISBA-15 aluminosilicate obeys a Langmuir isotherm, resulting in pore occupation of 25 to 30%. In contrast, the KIT-5 adsorbents showed very small adsorption capacities for the lysozyme adsorption, typically falling in 6 to 13% of pore occupation. The cage-type KIT-5 adsorbents have narrow channel (4 to 6 nm) where penetration of the lysozyme (3 x 3 x 4.5 nm) might be restricted. The KIT-5 adsorbent tends to collapse after long-time immersion in water, as indicated by XRD patterns, while the AISBA-15 adsorbent retains its regular structure even after immersion in basic water for 4 days. These facts confirm superiority of the AISBA-15 as an adsorbent as compared with the KIT-5 mesoporous silicates. This research strikingly demonstrates the selection of mesoporous materials is crucial to achieve efficient immobilization of biomaterials in aqueous environment.

Assemblies of biomaterials in mesoporous media.

Assemblies of biomaterials onto mechanically stable inorganic structure are advantageous for the practical applications because of the potential to improve the stability and performance of biomaterials in the biocatalytic processes. Among many kinds of inorganic materials, mesoporous materials such as mesoporous silica and mesoporous carbon have attracted special attention owing to their well-defined structures and perfectly controlled pore geometries, which would lead to unique functions such as size selective adsorption of biomaterials. In the first part of this review, adsorption behaviors of proteins, enzymes, vitamins, and amino acids in aqueous solutions onto mesoporous media are systematically explained. Pore geometries (pore diameter and volume) of mesoporous materials are the crucial factors for the size selective adsorption of biomaterials, especially proteins, which often have a size comparable to pore dimension. The studies on the adsorption of biomaterials on the mesoporous carbon reveal that hydrophobic interaction between guest molecules and surface of the mesoporous materials is an important parameter which controls the amount of biomaterials adsorption. Enhanced adsorption of biomaterials was commonly observed at their isoelectric point, where electrostatic repulsion is minimized between the biomaterials. In addition, several functions such as biomolecular separation, reactor function, controlled drug release, and photochemical properties are discussed in the latter sections. Studies on assemblies of biomaterials in mesoporous media are still in initial stage, but the development of appropriately designed mesoporous materials would powerfully promote researches in these fascinating unexplored fields.

Immobilization of lysozyme onto pore-engineered mesoporous AISBA-15.

In this research, hydrothermally stable mesoporous AISBA-15 materials have been used as adsorbents for systematic research on the lysozyme adsorption. Stability of the AISBA-15 adsorbents and the lysozyme molecules after the adsorption experiments for several days in aqueous solutions were confirmed by X-ray diffraction (XRD) measurement and FT-IR spectroscopy, respectively. The amount of the lysozyme adsorption can easily be controlled by the pore diameter and pore volume the mesoporous adsorbent, but an unreasonable effect of the surface area on the protein adsorption capacity was observed. The results of the effect of the pore diameter on the lysozyme adsorption suggest that the adsorption might partially be influenced by kinetically favorable edge-on type orientation on the confined mesopore. However, the final adsorption amount of the lysozyme can be well regenerated by models based on the side-on adsorption in dense packing. The present research also confirms the importance of appropriate "pore-engineering" for immobilization of bio-function on mesoporous materials.

Reversible micelle-vesicle conversion of oleyldimethylamine oxide by pH changes.

A preliminary study on the reversible micelle-vesicle conversion of oleyldimethylamine oxide [Kawasaki, H. et al. J. Phys. Chem. B. 2002, 106, 1524 ] is extended in the present study. In the presence of 0.01 M NaCl at a surfactant concentration of 0.05 M, a micelle-to-vesicle conversion with increasing degree of ionization alpha takes place in the following sequence: growth of fibrous micelle (alpha < 0.2), a fused network (alpha approximately 0.3), fibrous micelles + (perforated) vesicles (alpha = 0.4), and vesicles + lamellae (alpha = 0.5). Viscoelasticity correspondingly varies from the Maxwell-type behavior of the entangled network of fibrous micelles to the gel-like behavior of vesicle suspensions, via a fluid solution-like behavior of the fused network. This phase sequence is in contrast with the case of no added salt where no branching of micelles is observed, and long micelles and bilayers (vesicles + lamellae) coexist at alpha = 0.5. In water, a state of the lowest viscoelasticity occurs around alpha = 0.2 for both surfactant concentrations 0.05 and 0.15 M. Synergism between protonated and nonprotonated amine oxide headgroups is observed despite low ionic strengths. From the time course of the reversible micelle-vesicle conversion, vesicles seem to be formed from threadlike micelles within 25 h according to the shear moduli, while a longer conversion time is suggested by a flow property (viscosity). Shear thickening behavior is observed at alpha = 0.2 and 0.4 in 0.01 M NaCl but not in water.

Temperature-induced sedimentation to dispersion of ionic vesicles.

We present a temperature-induced sedimentation/dispersion transition of ionic vesicles in the system of alkyldimethylamine oxide hemihydrochloride (CnDMAO.1/2HCl) with a hydrocarbon chain length of 12-16 (n = 12, 14, and 16) and sodium 2-naphthalenesulfonate (NaNphS). The temperature-sensitive sedimentation/dispersion of ionic vesicles took place around a temperature of 50 degrees C, which was weakly dependent on the alkyl chain length. The combined effect of the thermally induced dissociation of the counterions from the vesicle and a hydrogen bonding between the nonionic and the cationic head groups is likely to be responsible for this unique behavior.

Biomaterial immobilization in nanoporous carbon molecular sieves: influence of solution pH, pore volume, and pore diameter.

The adsorption of lysozyme (Lz) onto nanoporous carbon molecular sieves with various pore diameters has been studied at different solution pH values. All the adsorption isotherms have successfully been correlated by the Langmuir equation. The amount of adsorbed Lz depends on the solution pH as well as on the specific pore volume and pore diameter of the adsorbents. The maximum adsorption was observed near the isoelectric point of the Lz (pI approximately 11), suggesting that suppression of electric repulsion between the enzymes plays an important role in the adsorption process. Moreover, the amount adsorbed depends on the pore size and pore volume of the nanoporous carbon adsorbents, indicating that the Lz molecules are adsorbed inside the mesopores. CMK-3-150 shows a larger amount of Lz adsorption as compared to CMK-3. The increased Lz adsorption capacity of CMK-3-150 may be due to the larger pore volume and pore diameter as compared to that of CMK-3. The unaltered structural order of the nanoporous adsorbents after the adsorption has been confirmed by the physicochemical characterization techniques such as XRD and N(2) adsorption. In addition, FT-IR spectroscopic studies confirm that the Lz used in this study is stable even after the adsorption on the nanoporous carbon. These results indicate that nanoporous carbon has superior water stability and thus is a more appropriate adsorbent for biomaterials than nanoporous silica.

Micelle-vesicle transition of oleyldimethylamine oxide in water.

We studied the effects of the degree of ionization(alpha) and the surfactant concentration (C(d)) on the micelle-vesicle transition in salt-free oleyldimethylamine oxide (OlDMAO) aqueous solutions by the dynamic light scattering (DLS), the hydrogen ion titration, the small angle neutron scattering (SANS), the electrophoretic light scattering (ELS) and viscoelastic measurements. From the study of ionization effects, the micelle-vesicle transition was recognized as a change of aggregate size by the DLS measurement; however, the micelle-vesicle transition was not detected both in the ELS measurement and the hydrogen ion titration, suggesting that the electric properties of the worm-like micelles and the vesicles are very similar despite a large difference of shapes between them. From the results of the SANS, the DLS and the viscosity measurements, it was suggested that a concentration-dependent micelle-vesicle transition took place around C(p)=10 mmolkg-1 for the solutions at alpha=0.5. In the concentration-range 10 mmolkg-1