Low-Temperature Chiral Crystal Structure and Superconductivity in (Pt0.2Ir0.8)3Zr5.

We report the observation of superconductivity in (Pt0.2Ir0.8)3Zr5 with a chiral space group (P6122) at low temperatures. The bulk nature of the superconductivity at a transition temperature of 2.2 K was confirmed using specific heat measurements. We revealed that (Pt0.2Ir0.8)3Zr5 obeys the weak-coupling Bardeen-Cooper-Schrieffer model, and the dominant mechanism in the upper critical field is the orbital pair-breaking limit rather than the Pauli-Clogston limit. This indicates that the antisymmetric spin-orbit coupling caused by the chiral crystal structure does not significantly affect the superconductivity of (Pt0.2Ir0.8)3Zr5.

Observation of superconductivity and enhanced upper critical field of η-carbide-type oxide Zr4Pd2O.

We report the first observation of bulk superconductivity of a η-carbide-type oxide Zr4Pd2O. The crystal structure and the superconducting properties were studied through synchrotron X-ray diffraction, magnetization, electrical resistivity, and specific heat measurement. The superconducting transition was observed at Tc = 2.73 K. Our measurement revealed that the η-carbide-type oxide superconductor Zr4Pd2O shows an enhanced upper critical field µ0Hc2(0) = 6.72 T, which violates the Pauli-Clogston limit µ0HP = 5.29 T. On the other hand, we found that the enhanced upper critical field is absent in a Rh analogue Zr4Rh2O. The large µ0Hc2(0) of Zr4Pd2O would be raised from strong spin-orbit coupling with Pd-4d electrons. The discovery of new superconducting properties for Zr4Pd2O would shed light on the further development of η-carbide-type oxide superconductors.

Synthesis and Characterization of a Trigonal Layered Compound AgInS2.

Depending on thermal and pressure conditions, AgInS2 exhibits various crystal structures. In this study, we synthesized a high-purity polycrystalline sample of trigonal AgInS2, which is a layered compound, using a high-pressure synthesis technique. The crystal structure was investigated by synchrotron powder X-ray diffraction and the Rietveld refinement. On the basis of band calculation, X-ray photoelectron spectroscopy, and electrical resistance measurements, we found that the obtained trigonal AgInS2 is a semiconductor. Temperature dependencies of electrical resistance of AgInS2 were measured by a diamond anvil cell up to 31.2 GPa. Although semiconducting behavior was suppressed with pressure, metallic behavior was not observed within the pressure range investigated in this study.

Sign change in c-axis thermal expansion constant and lattice collapse by Ni substitution in transition-metal zirconide superconductor Co1-xNixZr2.

Recently, c-axis negative thermal expansion (NTE) was observed in a CoZr2 superconductor and related transition-metal zirconides. Here, we investigated the structural, electronic, and superconducting properties of Co1-xNixZr2 to achieve systematic control of c-axis NTE and switching from NTE to positive thermal expansion (PTE) by Ni substitution. At x ≤ 0.3, c-axis NTE was observed, and the thermal expansion constant αc approached zero with increasing x. At x = 0.4-0.6, c-axis thermal expansion close to zero thermal expansion (ZTE) was observed, and PTE appeared for x ≥ 0.7. On the superconducting properties, we observed bulk superconductivity for x ≤ 0.6, and bulk nature of superconductivity is suppressed by Ni heavy doping (x ≥ 0.7). For x ≤ 0.6, the evolution of the electronic density of states well explains the change in the superconducting transition temperature (Tc), which suggests conventional phonon-mediated superconductivity in the system. By analyzing the c/a ratio, we observed a possible collapsed transition in the tetragonal lattice at around x = 0.6-0.8. The lattice collapse would be the cause of the suppression of superconductivity in Ni-rich Co1-xNixZr2 and the switching from NTE to PTE.

Robustness of superconductivity to external pressure in high-entropy-alloy-type metal telluride AgInSnPbBiTe5.

High-entropy-alloy (HEA) superconductors are a new class of disordered superconductors. However, commonality of superconducting characteristics of HEA materials is unclear. Here, we have investigated the crystal and electronic structure, and the robustness of superconducting states in a HEA-type metal telluride (MTe; M = Ag, In, Sn, Pb, Bi) under high pressure, and the results were compared with the pressure effects for a middle-entropy system (AgPbBiTe3) and a reference system of PbTe. When the crystal structure is CsCl-type, all phases show superconductivity under high pressure but exhibit different pressure dependences of the transition temperature (Tc). For PbTe, its Tc decreases with pressure. In contrast, the Tc of HEA-type AgInSnPbBiTe5 is almost independent of pressure, for pressures ranging from 13.0 to 35.1 GPa. Those results suggest that the robustness of superconductivity to external pressure is linked to the configurational entropy of mixing at the M site in MTe. Since the trend is quite similar to previous work on a HEA (Ti-Zr-Hf-Nb-Ta), where the robustness of superconductivity was observed up to ~ 200 GPa, we propose that the robustness of superconductivity under high pressure would be a universal feature in HEA-type superconductors.

Synthesis and Characterization of High-Entropy-Alloy-Type Layered Telluride MBi2Te4 (M = Ag, In, Sn, Pb, Bi).

Recently, high-entropy alloys (HEAs) and HEA-type compounds have been extensively studied in the fields of material science and engineering. In this article, we report on the synthesis of a layered system MBi2Te4 where the M site possesses low-, middle-, and high-entropy states. The samples with M = Pb, Ag1/3Pb1/3Bi1/3, and Ag1/5In1/5Sn1/5Pb1/5Bi1/5 were newly synthesized and the crystal structure was examined by synchrotron X-ray diffraction and Rietveld refinement. We found that the M-Te2 distance was systematically compressed with decreasing lattice constants, where the configurational entropy of mixing at the M site is also systematically increased. The details of structural refinements and the electrical transport property are presented.

Improvement of critical current density of REBa2Cu3O7-δ by increase in configurational entropy of mixing.

REBa2Cu3O7- δ (RE123, RE: rare earth) is one of the high-temperature superconductors with a transition temperature (T c) exceeding 90 K. Because of its high-T c and large critical current density (J c) under magnetic fields, RE123 superconductors have been expected to play a key role in superconductivity application. To accelerate application researches on RE123-based devices, further improvements of J c characteristics have been desired. In this study, we investigated the effects of high-entropy alloying at the RE site on the superconducting properties, through the measurements of local (intra-grain) J c ( J c local ) by a remanent magnetization method. We found that J c local shows a trend to be improved when four or five RE elements are mixed at the RE site, which results in high configurational entropy of mixing (ΔS mix). All samples exhibited an order of few MA cm-2 which is a criterion for practical application and the highest J c local resulted in a value of around 7.0 MA cm-2 at T = 2.0 K. Because high-entropy alloying can improve J c local of RE123 superconductors, our entropy-engineering strategy introduced here would be useful for the development of RE123 superconducting materials available under high magnetic fields.

Extremely high upper critical field in BiCh2-based (Ch: S and Se) layered superconductor LaO0.5F0.5BiS2-xSex (x = 0.22 and 0.69).

Centrosymmetric compounds with local inversion symmetry breaking have tremendously interesting and intriguing physical properties. In this study, we focus on a BiCh2-based (Ch: S, Se) layered superconductor, as a system with local inversion asymmetry, because spin polarisation based on the Rashba-Dresselhaus-type spin-orbit coupling has been observed in centrosymmetric BiCh2-based LaOBiS2 systems, while the BiCh2 layer lacks local inversion symmetry. Herein, we report the existence of extremely high in-plane upper critical fields in the BiCh2-based system LaO0.5F0.5BiS2-xSex (x = 0.22 and 0.69). The superconducting states are not completely suppressed by the applied magnetic fields with strengths up to 55 T. Thus, we consider that the in-plane upper critical field is enhanced by the local inversion symmetry breaking and its layered structure. Our study will open a new pathway for the discovery of superconductors that exhibit a high upper critical field by focusing on the local inversion symmetry breaking.

Superconductivity in In-doped AgSnBiTe3 with possible band inversion.

We investigated the chemical pressure effects on structural and electronic properties of SnTe-based material using partial substitution of Sn by Ag0.5Bi0.5, which results in lattice shrinkage. For Sn1-2x(AgBi)xTe, single-phase polycrystalline samples were obtained with a wide range of x. On the basis of band calculations, we confirmed that the Sn1-2x(AgBi)xTe system is basically possessing band inversion and topologically preserved electronic states. To explore new superconducting phases related to the topological electronic states, we investigated the In-doping effects on structural and superconducting properties for x = 0.33 (AgSnBiTe3). For (AgSnBi)(1-y)/3InyTe, single-phase polycrystalline samples were obtained for y = 0-0.5 by high-pressure synthesis. Superconductivity was observed for y = 0.2-0.5. For y = 0.4, the transition temperature estimated from zero-resistivity state was 2.4 K, and the specific heat investigation confirmed the emergence of bulk superconductivity. Because the presence of band inversion was theoretically predicted, and the parameters obtained from specific heat analyses were comparable to In-doped SnTe, we expect that the (AgSnBi)(1-y)/3InyTe and other (Ag, In, Sn, Bi)Te phases are candidate systems for studying topological superconductivity.

Experimental overview on pairing mechanisms of BiCh2-based (Ch: S, Se) layered superconductors.

BiCh2-based (Ch: S, Se) layered superconductors have attracted extensive attentions because of variation of materials and physical characteristics, which include relatively large spin-orbit coupling originating from bismuth 6porbitals, and the possibility of anisotropic superconducting gap. Some of theoretical studies suggested that anisotropic superconductivity is realized in the BiCh2-based superconductors. In experimental studies, angle-resolved photoemission spectroscopy measurement on the superconducting states of Nd(O,F)BiS2have revealed the anisotropic structure of the superconducting gap, and the absence of isotope effect have been reported, indicating unconventional superconductivity pairing. Furthermore, two-fold-symmetric in-plane anisotropy of magnetoresistance have been observed in the superconducting states of some of Bi(S,Se)2-based systems like La(O,F)Bi(S,Se)2while the crystal structure possesses a tetragonal square plane with four-fold symmetry. Those results indicate nematic superconductivity is emerging in BiCh2-based superconductors. On the basis of the observations suggesting unconventional superconductivity in BiCh2-based systems, clarification of pairing mechanisms of superconductivity in BiCh2-based superconductors have been highly desired. In this article, we review experimental results on the superconducting gap structure, the pairing mechanism, and related phenomena of BiCh2-based superconductors.

Observing and Modeling the Sequential Pairwise Reactions that Drive Solid-State Ceramic Synthesis.

Solid-state synthesis from powder precursors is the primary processing route to advanced multicomponent ceramic materials. Designing reaction conditions and precursors for ceramic synthesis can be a laborious, trial-and-error process, as heterogeneous mixtures of precursors often evolve through a complicated series of reaction intermediates. Here, ab initio thermodynamics is used to model which pair of precursors has the most reactive interface, enabling the understanding and anticipation of which non-equilibrium intermediates form in the early stages of a solid-state reaction. In situ X-ray diffraction and in situ electron microscopy are then used to observe how these initial intermediates influence phase evolution in the synthesis of the classic high-temperature superconductor YBa2 Cu3 O6+ x   (YBCO). The model developed herein rationalizes how the replacement of the traditional BaCO3 precursor with BaO2 redirects phase evolution through a low-temperature eutectic melt, facilitating the formation of YBCO in 30 min instead of 12+ h. Precursor selection plays an important role in tuning the thermodynamics of interfacial reactions and emerges as an important design parameter in planning kinetically favorable synthesis pathways to complex ceramic materials.

Formation Mechanism of ß-Li3PS4 through Decomposition of Complexes.

ß-Li3PS4 is a solid electrolyte with high Li+ conductivity, applicable to sulfide-based all-solid-state batteries. While a ß-Li3PS4-synthesized by solid-state reaction forms only in a narrow 300-450 °C temperature range upon heating, ß-Li3PS4 is readily available by liquid-phase synthesis through low-temperature thermal decomposition of complexes composed of PS43- and various organic solvents. However, the conversion mechanism of ß-Li3PS4 from these complexes is not yet understood. Herein, we proposed the synthesis mechanism of ß-Li3PS4 from Li3PS4·acetonitrile (Li3PS4·ACN) and Li3PS4·1,2-dimethoxyethane (Li3PS4·DME), whose structural similarity with ß-Li3PS4 would reduce the nucleation barrier for the formation of ß-Li3PS4. Synchrotron X-ray diffraction clarified that both complexes possess similar layered structures consisting of alternating Li2PS4- and Li+-ACN/DME layers. ACN/DME was removed from these complexes upon heating, and rotation of the PS4 tetrahedra induced a uniaxial compression to form the ß-Li3PS4 framework.

High-pressure effects on superconducting properties and crystal structure of Bi-based layered superconductor La2O2Bi3Ag0.6Sn0.4S6.

The effects of pressure on the superconducting properties of a Bi-based layered superconductor La2O2Bi3Ag0.6Sn0.4S6, which possesses a four-layer-type conducting layer, have been studied through the electrical resistance and magnetic susceptibility measurements. The crystal structure under pressure was examined using synchrotron x-ray diffraction at SPring-8. In the low-pressure regime, bulk superconductivity with a transition temperatureTcof ∼4.5 K was induced by pressure, which was achieved by in-plane chemical pressure effect owing to the compression of the tetragonal structure. In the high-pressure regime above 6.4 GPa, a structural symmetry lowering was observed, and superconducting transitions with aTc∼ 8 K were observed. Our results suggest the possible commonality on the factor essential forTcin Bi-based superconductors with two-layer-type and four-layer-type conducting layers.

Possible pairing mechanism switching driven by structural symmetry breaking in BiS2-based layered superconductors.

Investigation of isotope effects on superconducting transition temperature (Tc) is one of the useful methods to examine whether electron-phonon interaction is essential for pairing mechanisms. The layered BiCh2-based (Ch: S, Se) superconductor family is a candidate for unconventional superconductors, because unconventional isotope effects have previously been observed in La(O,F)BiSSe and Bi4O4S3. In this study, we investigated the isotope effects of 32S and 34S in the high-pressure phase of (Sr,La)FBiS2, which has a monoclinic crystal structure and a higher Tc of ~ 10 K under high pressures, and observed conventional-type isotope shifts in Tc. The conventional-type isotope effects in the monoclinic phase of (Sr,La)FBiS2 are different from the unconventional isotope effects observed in La(O,F)BiSSe and Bi4O4S3, which have a tetragonal structure. The obtained results suggest that the pairing mechanisms of BiCh2-based superconductors could be switched by a structural-symmetry change in the superconducting layers induced by pressure effects.

Evolution of two bulk-superconducting phases in Sr0.5RE0.5FBiS2 (RE: La, Ce, Pr, Nd, Sm) by external hydrostatic pressure effect.

Polycrystalline samples of Sr0.5RE0.5FBiS2 (RE: La, Ce, Pr, Nd, and Sm) were synthesized via the solid-state reaction and characterized using synchrotron X-ray diffraction. Although all the Sr0.5RE0.5FBiS2 samples exhibited superconductivity at transition temperatures (Tc) within the range of 2.1-2.7 K under ambient pressure, the estimated superconducting volume fraction was small, which indicates non-bulk nature of superconductivity in those samples under ambient pressure. A dramatic increase in shielding fraction, which indicates the emergence of the bulk superconductivity was achieved by applying external hydrostatic pressures. We found that two phases, low-P phases with Tc = 2.5-2.8 K and high-P phases with Tc = 10.0-10.8 K, were induced by the pressure effect for samples with RE = La, Ce, Pr, and Nd. Pressure-Tc phase diagrams indicated that the critical pressure for the emergence of the high-P phase tends to increase with decreasing ionic radius of the doped RE ions, which was explained by the correlation between external and chemical pressure effects. According to the high-pressure X-ray diffraction measurements of Sr0.5La0.5FBiS2, a structural phase transition from tetragonal to monoclinic also occurred at approximately 1.1 GPa. Bulk superconducting phases in Sr0.5RE0.5FBiS2 induced by the external hydrostatic pressure effect are expected to be useful for understanding the effects of both external and chemical pressures to the emergence of bulk superconductivity and pairing mechanisms in BiCh2-based superconductors.

An efficient way of increasing the total entropy of mixing in high-entropy-alloy compounds: a case of NaCl-type (Ag,In,Pb,Bi)Te1-xSex (x = 0.0, 0.25, 0.5) superconductors.

We propose an efficient way of increasing the entropy of mixing in high-entropy-alloy-type compounds, which can be achieved by multi-site alloying. As an example of this concept, we report the synthesis and observation of polycrystalline samples of new high-entropy-alloy-type metal chalcogenides (Ag,In,Pb,Bi)Te1-xSex (x = 0.0, 0.25, and 0.5) with a NaCl-type structure. The samples were synthesized using high pressure synthesis. Superconductivity with transition temperatures of 2.7, 2.5, and 2.0 K was observed with x = 0.0, 0.25, and 0.5, respectively. To investigate the multi-site alloying effect on the entropy of mixing (ΔSmix) for the examined samples, we calculated the total ΔSmix for two crystallographic sites. For the samples with x = 0.25 and 0.5, ΔSmix reaches 1.89R and 2.00R, respectively, which exceed the ΔSmix of 1.79R for a simple (single-site) high-entropy alloy containing six different elements.

Crystal Structure and Thermoelectric Transport Properties of As-Doped Layered Pnictogen Oxyselenides NdO0.8F0.2Sb1-xAsxSe2.

We report the synthesis and thermoelectric transport properties of As-doped layered pnictogen oxyselenides NdO0.8F0.2Sb1-xAsxSe2 (x ≤ 0.6), which are predicted to show high-performance thermoelectric properties based on first-principles calculation. The crystal structure of these compounds belongs to the tetragonal P4/nmm space group (No. 129) at room temperature. The lattice parameter c decreases with increasing x, while a remains almost unchanged among the samples. Despite isovalent substitution of As for Sb, electrical resistivity significantly rises with increasing x. Very low thermal conductivity of less than 0.8 Wm-1K-1 is observed at temperatures between 300 and 673 K for all the examined samples. For As-doped samples, the thermal conductivity further decreases above 600 K. Temperature-dependent synchrotron X-ray diffraction indicates that an anomaly also occurs in the c-axis length at around 600 K, which may relate to the thermal transport properties.

Flux Growth and Superconducting Properties of (Ce,Pr)OBiS2 Single Crystals.

Ce1-x Pr x OBiS2 (0. 1 ≤ x ≤ 0.9) single crystals were grown using a CsCl flux method. Their structural and physical properties were examined by X-ray diffraction, X-ray absorption, transmission electron microscopy, and electrical resistivity. All of the Ce1-x Pr x OBiS2 single crystals with 0.1 ≤ x ≤ 0.9 exhibited tetragonal phase. With increasing Pr content, the a-axis and c-axis lattice parameters decreased and increased, respectively. Transmission electron microscope analysis of Ce0.1Pr0.9OBiS2 (x = 0.9) single crystal showed no stacking faults. Atomic-resolution energy dispersive X-ray spectrometry mapping revealed that Bi, Ce/Pr, O, and S occupied different crystallographic sites, while Ce and Pr randomly occupied the same sites. X-ray absorption spectra showed that an increase of the Pr ratio increased the ratio of Ce4+/Ce3+. All of the Ce1-x Pr x OBiS2 crystals showed superconducting transition, with a maximum transition temperature of ~4 K at x = 0.9.

Bulk superconductivity in a four-layer-type Bi-based compound La2O2Bi3Ag0.6Sn0.4S5.7Se0.3.

Recently, we reported the observation of superconductivity at ~0.5 K in a La2O2M4S6-type (M: metal) layered compound La2O2Bi3AgS6, which is a layered system related to the BiS2-based superconductor system but possesses a thicker Bi3AgS6-type conducting layer. In this study, we have developed the La2O2Bi3AgS6-type materials by element substitutions to increase the transition temperature (Tc) and to induce bulk nature of superconductivity. A resistivity anomaly observed at 180 K in La2O2Bi3AgS6 was systematically suppressed by Sn substitution for the Ag site. By the Sn substitution, Tc increased, and the shielding volume fraction estimated from magnetization measurements also increased. The highest Tc (=2.3 K) and the highest shielding volume fraction (~20%) was observed for La2O2Bi3Ag0.6Sn0.4S6. The superconducting properties were further improved by Se substitutions for the S site. By the combinational substitutions of Sn and Se, bulk-superconducting phase of La2O2Bi3Ag0.6Sn0.4S5.7Se0.3 with a Tc of 3.0 K (Tconset = 3.6 K) was obtained.

An electronic structure governed by the displacement of the indium site in In-S6 octahedra: LnOInS2 (Ln = La, Ce, and Pr).

An extremely large displacement of the indium site in In-S6 octahedra in LnOInS2 (Ln = La, Ce, and Pr) was found in synchrotron X-ray diffraction. LaOInS2 with off-center indium in In-S6 octahedra exhibited a wider optical band gap than CeOInS2 and PrOInS2 with on-center indium. Therefore, the electronic structure of LnOInS2 is governed by the indium site with an extremely large displacement. All LnOInS2 produced H2 gas under visible light irradiation in the presence of sacrificial electron donors.