Modeling for extraction of oil from walnut and sesame using batch flow cold press oil extraction system.

In this study, a batch flow oil extraction system was used for extraction of oil from walnut (Juglans regia L.) and Sesamum (Indicum sesame). Sample mass (g), applied pressure (MPa), and processing temperature of oil (°C) were selected as independent variables and oil extraction mass percentage and oil analysis as dependent variables. Response surface methodology was employed for conducting statistical analysis, modeling, and data optimization. The results revealed that the highest percentage of oil extraction for walnut was obtained at a pressure of 10.5 MPa, a temperature of 31.5°C, and a sample weight of 8 g, with a value of 25.36%. Also, the highest percentage of oil extraction for Sesamum was obtained at the pressure of 13.88 MPa, the temperature of 31.5°C, and a sample value of 20 g with a value of 22.4%. Optimal level of independent variables for walnut and sesame were 8.03 g, 10.41 MPa, and 27.37°C; 20 g, 13.88 MPa, and 27°C, respectively. In this optimum condition, the amount of sesame and walnut peroxide was 10 ± 0.03 and 1.9 ± 0.07 (meq O2/kg), respectively. Likewise, the amount of acid for sesame and walnut was 1.53 ± 0.05 and 0.06 ± 0.02 g/%, separately. Linoleic acid (42.7-51.15), oleic acid (38.6-24.03), palmitic acid (10.87-8.21), and stearic acid (5.5-3.39) were the most common fatty acid components in sesame and walnuts, respectively.

Occurrence, distribution and characteristics of microplastics in gastrointestinal tract and gills of commercial marine fish from Malaysia.

Microplastics are tiny plastic particles with size below 5 mm, prevalence in marine environments and the occurrence have been reported in commercial marine fish worldwide. Microplastics' abilities to absorb various marine contaminants raised considerable concern on their role as a vector to spread harmful pollutants to the alienated environment. This study focussed on the occurrence of microplastics in gastrointestinal tract (GIT) and gills of 158 fishes across 16 species from two locations in Malaysia coastal waters. Microplastics were detected approximately 86% in the GIT and 92% in the gills of examined fish. High incident of microplastics was detected in fishes from the area that is close to an urban area with average microplastics incident reaching up to 9.88 plastics items/individuals. Meanwhile, only 5.17 microplastics per individual were recorded in fishes from a less urbanised area. Isolated microplastics comprised 80.2% of fibres, 17.7% of fragments and the remaining was derived from filaments (3.1%). Infrared and Raman spectroscopy analysis of selected microplastics revealed the chemical composition of microplastics which comprised of polyethene (PE), polypropylene (PP), acrylonitrile butadiene styrene (ABS), polystyrene (PS) and polyethylene terephthalates (PET). FESEM images indicate, different surface characteristics of microplastics as a result of environmental exposure. Further, elemental analysis using EDX for green PE fragments showed the uneven distribution of chromium (Cr) and iron (Fe) on the surface, suggesting the adherence of heavy metals on the surface of microplastics. Overall findings indicate the widespread distribution of microplastics in commercial marine fishes from Malaysia waters and could potentially lead to human exposure through fish consumption.

Enhancing the Decolorization of Methylene Blue Using a Low-Cost Super-Absorbent Aided by Response Surface Methodology.

The presence of organic dyes from industrial wastewater can cause pollution and exacerbate environmental problems; therefore, in the present work, activated carbon was synthesized from locally available oil palm trunk (OPT) biomass as a low-cost adsorbent to remove synthetic dye from aqueous media. The physical properties of the synthesized oil palm trunk activated carbon (OPTAC) were analyzed by SEM, FTIR-ATR, and XRD. The concurrent effects of the process variables (adsorbent dosage (g), methylene blue (MB) concentration (mg/L), and contact time (h)) on the MB removal percentage from aqueous solution were studied using a three-factor three-level Box-Behnken design (BBD) of response surface methodology (RSM), followed by the optimization of MB adsorption using OPTAC as the adsorbent. Based on the results of the analysis of variance (ANOVA) for the three parameters considered, adsorbent dosage (X1) is the most crucial parameter, with an F-value of 1857.43, followed by MB concentration (X2) and contact time (X3) with the F-values of 95.60 and 29.48, respectively. Furthermore, the highest MB removal efficiency of 97.9% was achieved at the optimum X1, X2, and X3 of 1.5 g, 200 mg/L, and 2 h, respectively.

Life Cycle Assessment (LCA) of Particleboard: Investigation of the Environmental Parameters.

Particleboard is not entirely a wood replacement but a particular material with its properties, making it more effective at different times than heavy or solid wood. The world's biggest concern is environmental problems with formaldehyde as a particulate board binder that can lead to human carcinogenic agents. A cradle-to-gate life cycle assessment (LCA) of particleboard production was performed using openLCA software. The impact assessment was carried out according to the software's features. This preliminary investigation aims to analyze the chemical composition of particleboard and identify its environmental impact. The Fourier-transform infrared spectroscopy (FTIR) system was used to track the functional group of aliphatic hydrocarbons, inorganic phosphates, and main aliphatic alcohols found in particleboards made in Malaysia. Based on the FTIR results, aliphatic groups were found in numerous aggravates that the spectroscopic infrared was likely to experience. The most important vibrational modes were C-H, at approximately 3000 cm-1, and -CH deformations around 1460 cm-1 and 1380 cm-1. Eight effect groups demonstrated that 100% of the input and all analyses produced the same relative outcome. The life cycle of a product is determined by pollution of the air, water, and soil. Thus, particleboard has a minimal impact on the environment, except for global warming.

Sago starch nanocrystal-stabilized Pickering emulsions: Stability and rheological behavior.

This study presents the isolation of SNC from sago starch and its performance as proficient particle emulsifier. It highlights the impact of SNC on the stability and rheological properties of oil-in-water (o/w) emulsions. The percentage yield of the SNC obtained was equivalent to 25 ± 0.1% (w/w) with particle diameters ranging from 25 to 100 nm. A series of Pickering emulsion at different ratios of oil (5%-35% v/v) and SNC (1%-4% w/v) was prepared for further investigations. The mean droplet diameter of emulsions obtained was ranged from 19.12 to 35.96 µm, confirming the effects of both SNC and oil content on the droplet's diameter distribution. Formulations with 4.0 wt% of SNC exhibited the maximum stability against coalescence. Results obtained have justified that the SNC can be used as an alternative solid emulsifier in producing stable emulsion with desired properties for various applications.

Augmentation of the Delamination Factor in Drilling of Carbon Fibre-Reinforced Polymer Composites (CFRP).

Carbon fibre-reinforced polymer (CFRP) composite materials play an increasingly important role in modern manufacturing, and they are among the more prominent materials used in aircraft manufacturing today. However, CFRP is highly prone to delamination and other damage when drilled due to it being extremely strong with a good strength-to-weight ratio and high thermal conductivity. Because of this problem and CFRP's growing importance in aircraft manufacture, research has focused on the entry and exit holes as indicators of damage occurrence during drilling of screws, rivets, and other types of holes. The inside of the hole was neglected in past research and a proper way to quantify the internal side of a hole by combining the entry and exit hole should be included. To fill this gap and improve the use of CFRP, this paper reports a novel technique to measure the holes by using the extension of the adjusted delamination factor (SFDSR) for drilling thick CFRP composites in order to establish the influence of machining input variables on key output measures, i.e., delamination and other damages. The experimental results showed a significant difference in interpretation of the damage during the analysis. Improvement was made by providing better perspectives of identifying hole defects.

Improving the efficiency of post-digestion method in extracting microplastics from gastrointestinal tract and gills of fish.

Post-digestion treatment is an important step during sample preparation to facilitate the removal of undigested materials for better detection of ingested microplastics. Sieving, density separation with zinc chloride solution (ZnCl2), and oil extraction protocol (OEP) have been introduced in separating microplastics from sediments. The clean-up methods are rarely highlighted in previous studies, especially in the separation of microplastics from marine biota. Thus, this study proposed and compared the suitability of three techniques, which can reduce the number of undigested particles from the digestate of GIT and gills. Our result has shown excellent removal of non-plastics materials and reduces the coloration of filter paper in all treated samples. Both sieving and density separation achieved optimum post-digestion efficiencies of >95% for both GIT and gill samples, which former showed no effect on polymer integrity. Additionally, high recovery rate was obtained for the larger size microplastics (>500 µm) with approximately 97.7% (GIT) and 95.7% (gill), respectively. Exposure to the ZnCl2 solution led to a significant loss of smaller size PET and changed the absorption spectrums of all tested polymers. Particle morphology determined by SEM revealed such exposure eroded the surface of PET fragments and elemental analysis has shown detectable peaks of zinc and chlorine appeared. Low microplastics recoveries were achieved through OPE and residue of oil was observed from the infrared spectrum of all tested polymer. The findings demonstrate sieving with size fractioning can provide exceptional removal of non-plastics materials from the digestate of GIT and gill samples.

Formation of Antihyperlipidemic Nano-Ezetimibe from Volatile Microemulsion Template for Enhanced Dissolution Profile.

Nanostructures play an important role in targeting sparingly water-soluble drugs to specific sites. Because of the structural flexibility and stability, the use of template microemulsions (µEs) can produce functional nanopharmaceuticals of different sizes, shapes, and chemical properties. In this article, we report a new volatile oil-in-water (o/w) µE formulation comprising ethyl acetate/ethanol/brij-35/water to obtain the highly water-dispersible nanoparticles of an antihyperlipidemic agent, ezetimibe (EZM-NPs), to enhance its dissolution profile. A pseudoternary phase diagram was delineated in a specified brij-35/ethanol ratio (1:1) to describe the transparent, optically isotropic domain of the as-formulated µE. The water-dilutable µE formulation, comprising an optimum composition of ethyl acetate (18.0%), ethanol (25.0%), brij-35 (25.0%), and water (32.0%), showed a good dissolvability of EZM around 4.8 wt % at pH 5.2. Electron micrographs showed a fine monomodal collection of EZM-loaded µE droplets (∼45 nm) that did not coalesce even after lyophilization, forming small spherical EZM-NPs (∼60 nm). However, the maturity of nanodrug droplets observed through dynamic light scattering suggests the affinity of EZM to the nonpolar microenvironment, which was further supported through peak-to-peak correlation of infrared analysis and fluorescence measurements. Moreover, the release profile of the as-obtained EZM-nanopowder increased significantly >98% in 30 min, which indicates that a reduced drug concentration will be needed for capsules or tablets in the future and can be simply incorporated into the multidosage formulation of EZM.