Laypersons' Assessment of Smile Esthetics in Young Individuals in Ha'il, Saudi Arabia.

INTRODUCTION: When planning esthetic dental treatments, understanding smile preferences is important for dental professionals. This study aimed to evaluate the impact of selected smile characteristics on the attractiveness of young Saudis as assessed by Saudi laypersons and explore gender-preferred changes in smile attractiveness. METHODOLOGY: This observational study assessed the dynamic smile attractiveness of 168 Saudi individuals (84 males and 84 females), selected through non-probability convenience sampling. Dynamic smiles were elicited by viewing comedic content and captured with a camera standardized for consistent positioning. Videos were edited and adjusted to images, and the frames with the most pronounced smiles were chosen. The intra-rater reliability was assessed using intra-class correlation coefficients (ICCs) and Cohen's kappa tests (κ). The highest and lowest 25th percentiles were categorized as attractive and unattractive smiles, respectively, on the visual analog scale (VAS) by laypersons. Six smile characteristics - anterior smile line, smile arc, upper lip curvature, posterior teeth displayed, smile index, and smile symmetry - were quantitatively evaluated from these images for each participant and classified into attractive and unattractive groups based on laypersons' VAS evaluations. Continuous variables were tested with the Mann-Whitney U test, and for the categorical variables, the Chi-square test was applied. The significance was set at 5%. RESULTS:  The four randomly selected out of the 22 raters had good VAS reliability; ICCs varied from 0.661 to 0.94, with an average of 0.737, and Cohen's kappa tests for smile characteristics showed values from 0.617 to 0.89. Good agreement was also found with the smile index, with ICCs of 0.775, and dynamic smile symmetry, with ICCs of 0.872. Laypersons rated female smiles as more attractive compared to male smiles (P = 0.004). Low or average anterior smile lines (P = 0.001 for males; P = 0.03 for females), parallel smile arcs (P = 0.001 for males; P = 0.02 for females), and higher smile indexes (P = 0.001 for males; P = 0.004 for females) were significantly attractive, showing no significant gender differences.  Conclusions: Laypersons reliably rated the young Saudis' dynamic smiles as attractive. Of the rated smile characteristics, those with a low or average anterior smile line, parallel smile arcs, and a larger smile index were deemed more attractive. This study's findings show no significant gender differences in the impact of the studied smile characteristics on attractiveness. This study's findings can help dental professionals customize treatment plans that meet patients' expectations.

Survival after Trastuzumab Therapy in Patients with Locally Advanced or Metastatic HER2-Positive Gastric or Gastroesophageal Junction Cancer: A Meta-Analysis of Randomized Controlled Trials.

Background: In the Trastuzumab for Gastric Cancer study, it was found that trastuzumab combined with doublet chemotherapy (fluoropyrimidine and platinum) was the gold-standard treatment for gastroesophageal adenocarcinoma (GEA) that was locally advanced, unresectable, or metastatic (HER2+). Materials and Methods: We performed a meta-analysis of randomized phase II/III studies testing trastuzumab in combination or alone. Results: This meta-analysis's findings involved 2048 patients in total. The treatment arm and hormone receptor status were used to stratify the combined HR. Overall, the PFS (Random model) HR [0.80] and 95% confidence intervals (CI) [0.68-0.95] were significantly higher for regimens containing trastuzumab, fluoropyrimidine, and platinum compared to regimens containing fluoropyrimidine and platinum. Conclusions: The results of this meta-analysis provide additional support for trastuzumab's use in treating HER2-positive GEA, particularly in cases where the disease lacks a HER2+ receptor.

Effects of school nurse-led health education to reduce malnutrition among primary school children in Bangladesh: Cluster nonrandomized controlled trial.

Background: Malnutrition is a major health concern among children especially in low and middle-income countries. However, there are limited studies on school health in Bangladesh. This study aimed to reduce malnutrition among primary school children in Bangladesh by increasing awareness and knowledge through school nurse-led health education. Methods and Materials: A prospective, open-label, parallel-group (1:1), cluster nonrandomized controlled trial on primary school children conducted in rural Bangladesh. The study lasted 13 months between September 2021 and September 2022. Four schools were selected and assigned to the intervention and control groups (CGs). Next, school nurses provided evidence-based health education to the children in the intervention group (IG) for 9 months to improve awareness and knowledge of malnutrition. Data were collected at baseline, midline, and endline. Results: Overall, 604 children were enrolled at the baseline; among them, 455 (CG, n = 220; IG, n = 235) completed the study. Changes in the malnutrition rate-the primary outcome-were not significant (P = 0.225). However, after adjusting the endline data with baseline and sociodemographic data, the children's body mass index improved significantly in the IG than in the CG (P < 0.05). Changes in eating behavior, and awareness and knowledge of malnutrition-the secondary outcomes-significantly differed between the groups (P < 0.001). Conclusion: The school nurse-led health education program significantly improved primary school children's awareness and knowledge of malnutrition. This study revealed the effectiveness of school nurses in reducing malnutrition among children, which may decrease future morbidity and mortality rates in children.

Pediatric Cervical Kyphosis: A Retrospective Multicenter Analysis and Literature Review.

Introduction: This study aims to investigate cervical kyphosis in children, which has gained increasing attention in recent years due to its higher incidence and its association with tumor surgeries, and to shed light on the unique anatomical and biomechanical differences between pediatric and adult populations regarding cervical sagittal alignment. Additionally, it explores the diverse causes and management approaches, which often pose significant challenges. Furthermore, this study presents the management outcomes from three spine centers in the Middle East. Methods: A retrospective analysis was conducted on patient records from 2009 to 2021 in three centers located in Saudi Arabia, Egypt, and Jordan. Demographic and clinical data were collected, imaging studies were reviewed, and various treatment modalities and their corresponding outcomes were documented and analyzed. Additionally, a literature review on pediatric cervical kyphosis and its management was performed. Results: Seventeen patients were included in this study. The average age at presentation was 11.9 years. Among the participants, 14 underwent surgical treatment, 1 was treated with Minerva orthosis, and 2 were observed. The mean follow-up period was 32.4 months. In surgically treated patients, a statistically significant higher degree of correction was achieved when combining anterior and posterior surgeries compared to performing standalone anterior or posterior surgery (P-value = 0.014). Conclusions: Although rare, pediatric cervical kyphosis is a significant condition within the spectrum of pediatric deformities and frequently occurs as a component of syndromes or as a result of iatrogenic factors. Neck pain and myelopathy are the most commonly observed symptoms. Thorough evaluation and complex surgical interventions are typically required for most cases.

Objective assessment of postural ergonomics in neurosurgery: integrating wearable technology in the operating room.

OBJECTIVE: Physical stress associated with the static posture of neurosurgeons over prolonged periods can result in fatigue and musculoskeletal disorders. Objective assessment of surgical ergonomics may contribute to postural awareness and prevent further complications. This pilot study examined the feasibility of using wearable technology as a biofeedback tool to address this gap. METHODS: Ten neurosurgeons, including 5 attendings (all faculty) and 5 trainees (1 fellow, 4 residents), were recruited and equipped with two wearable sensors attached to the back of their head and their upper back. The sensors collected the average time spent in extended (≤ -10°), neutral (> -10° and < 10°), and flexed (≥ 10°) static postures (undetected activity for more than 10 seconds) during spine and cranial procedures. Feasibility outcomes aimed for more than 70% of accurate data collection. Exploratory outcomes included the comparison of postural variability within and between participants adjusted to their demographics excluding nonrelated surgical activities, and postoperative self-assessment surveys. RESULTS: Sixteen (80%) of 20 possible recordings were successfully collected and analyzed from 11 procedures (8 spine, 3 cranial). Surgeons maintained a static posture during 52.7% of the active surgical time (mean 1.58 hrs). During spine procedures, all surgeons used an exoscope while standing, leading to a significantly longer time spent in a neutral static posture (p < 0.001, partial η2 = 0.14): attendings remained longer in a neutral static posture (36.4% ± 15.3%) than in the extended (9% ± 6.3%) and flexed (5.7% ± 3.4%) static postures; trainees also remained longer in a neutral static posture (30.2% ± 13.8%) than in the extended (11.1% ± 6.3%) and flexed (11.9% ± 6.6%) static postures. During cranial procedures, surgeons intermittently transitioned between standing/exoscope use and sitting/microscope use, with trainees spending a shorter time in a neutral static posture (16.3% vs 48.5%, p < 0.001) and a longer time in a flexed static posture (18.5% vs 2.7%, p < 0.001) compared with attendings. Additionally, longer cranial procedures correlated with surgeons spending a longer time (r = 0.94) in any static posture (extended, flexed, and neutral), with taller surgeons exhibiting longer periods in flexed and extended static postures (r = 0.86). Postoperative self-assessment revealed that attendings perceived spine procedures as more difficult than trainees (p = 0.029), while trainees found cranial procedures to be of greater difficulty than spine procedures (p = 0.012). Attendings felt more stressed (p = 0.048), less calmed (p = 0.024), less relaxed (p = 0.048), and experienced greater stiffness in their upper body (p = 0.048) and more shoulder pain (p = 0.024) during cranial versus spine procedures. CONCLUSIONS: Wearable technology is feasible to assess postural ergonomics and provide objective biofeedback to neurosurgeons during spine and cranial procedures. This study showed reproducibility for future comparative protocols focused on correcting posture and surgical ergonomic education.

Reporting Practices of Serum Protein Electrophoresis in Pakistan - a Multicenter Survey.

BACKGROUND: Serum Protein Electrophoresis (SPE) is crucial for the diagnosis and follow-up of monoclonal gammopathy (MG), as it helps to separate and identify these paraproteins. Currently, Pakistan lacks standardized guidelines for SPE reporting and analytical performance. This survey aims to analyze reporting variations from Consultant Chemical Pathologists in Pakistani laboratories. METHODS: This cross-sectional survey was conducted by the section of Chemical Pathology, Department of Pathology and Laboratory Medicine, at Aga Khan University Hospital, Karachi. A previously validated and published tool was used with some modifications to assess analytical techniques, reporting patterns, and interpretations provided with SPE by different laboratories. Frequency and percentages were calculated for each response and descriptive results were also evaluated. Differences between laboratories were also assessed qualitatively. RESULTS: Out of the eight laboratories contacted, seven participated in the survey, yielding a response rate of 87.5%. Immunofixation Electrophoresis (IFE) was used by all labs for serum immunotyping. All labs reported a new small abnormal band in patients with no known monoclonal gammopathy or with a known M-protein. Variations were found in terminologies used to label paraprotein, terminologies used to report normal and pathological SPE patterns, electrophoretic technique, methods for quantifying paraprotein in the gamma region on SPE and for albumin quantification. Similarly, the number of decimal places reported, reporting of multiple monoclonal proteins and small paraprotein in the beta region or monoclonal proteins less than 1 g/L, approach for screening, number of fractions reported in gamma region and reporting of interferences were also not standardized and var-iations were noticed. CONCLUSIONS: Our survey highlighted variations in practices of SPE reporting. These differences in laboratory practices could result in inconsistent test results, which could adversely affect patient care.

Ultrathin Magnesium-Based Coating as an Efficient Oxygen Barrier for Superconducting Circuit Materials.

Scaling up superconducting quantum circuits based on transmon qubits necessitates substantial enhancements in qubit coherence time. Over recent years, tantalum (Ta) has emerged as a promising candidate for transmon qubits, surpassing conventional counterparts in terms of coherence time. However, amorphous surface Ta oxide layer may introduce dielectric loss, ultimately placing a limit on the coherence time. In this study, a novel approach for suppressing the formation of tantalum oxide using an ultrathin magnesium (Mg) capping layer is presented. Synchrotron-based X-ray photoelectron spectroscopy studies demonstrate that oxide is confined to an extremely thin region directly beneath the Mg/Ta interface. Additionally, it is demonstrated that the superconducting properties of thin Ta films are improved following the Mg capping, exhibiting sharper and higher-temperature transitions to superconductive and magnetically ordered states. Moreover, an atomic-scale mechanistic understanding of the role of the capping layer in protecting Ta from oxidation is established based on computational modeling. This work provides valuable insights into the formation mechanism and functionality of surface tantalum oxide, as well as a new materials design principle with the potential to reduce dielectric loss in superconducting quantum materials. Ultimately, the findings pave the way for the realization of large-scale, high-performance quantum computing systems.

Microhardness and Gloss of a New CAD/CAM Hybrid Material Following Accelerated Aging and Coffee Immersion.

PURPOSE: To evaluate and compare the effect of accelerated aging and coffee immersion on the microhardness and gloss of a new computer-aided design and computer-aided manufacturing (CAD/CAM) hybrid material (Crystal Ultra) to those of contemporary restorative materials. MATERIALS AND METHODS: A total of 160 specimens (12 × 14 × 1 mm ± 0.05 mm) were obtained from IPS e.max (IPS), VITA Enamic (VE), Crystal Ultra (CU), Lava Ultimate (LU), and CeraSmart (CS) high-translucency CAD/CAM blocks. The Vickers microhardness and gloss of the specimens were determined after thermocycling and coffee immersion. Data analysis was performed using SPSS (α = .05). RESULTS: IPS and CS specimens exhibited the highest (572.66 ± 11.30) and lowest (61.92 ± 3.91) microhardness, respectively. The highest gloss was observed with IPS specimens (3.31 ± 0.32), and LU specimens showed the lowest gloss (2.33 ± 0.06). A significant difference in gloss was observed between the materials at all measurement intervals (P < .01), except at T0 (P = .43). IPS specimens showed no significant changes in either group at any measurement interval. CONCLUSIONS: The microhardness and gloss of the new CU material were comparable to those of the tested contemporary hybrid restorative materials. Glass-ceramic showed superior hardness and gloss compared to hybrid restorative materials. Accelerated aging with thermocycling and staining significantly affected the microhardness and gloss of all tested CAD/CAM materials.

Synthetic Megavoltage Cone Beam Computed Tomography Image Generation for Improved Contouring Accuracy of Cardiac Pacemakers.

In this study, we aimed to enhance the contouring accuracy of cardiac pacemakers by improving their visualization using deep learning models to predict MV CBCT images based on kV CT or CBCT images. Ten pacemakers and four thorax phantoms were included, creating a total of 35 combinations. Each combination was imaged on a Varian Halcyon (kV/MV CBCT images) and Siemens SOMATOM CT scanner (kV CT images). Two generative adversarial network (GAN)-based models, cycleGAN and conditional GAN (cGAN), were trained to generate synthetic MV (sMV) CBCT images from kV CT/CBCT images using twenty-eight datasets (80%). The pacemakers in the sMV CBCT images and original MV CBCT images were manually delineated and reviewed by three users. The Dice similarity coefficient (DSC), 95% Hausdorff distance (HD95), and mean surface distance (MSD) were used to compare contour accuracy. Visual inspection showed the improved visualization of pacemakers on sMV CBCT images compared to original kV CT/CBCT images. Moreover, cGAN demonstrated superior performance in enhancing pacemaker visualization compared to cycleGAN. The mean DSC, HD95, and MSD for contours on sMV CBCT images generated from kV CT/CBCT images were 0.91 ± 0.02/0.92 ± 0.01, 1.38 ± 0.31 mm/1.18 ± 0.20 mm, and 0.42 ± 0.07 mm/0.36 ± 0.06 mm using the cGAN model. Deep learning-based methods, specifically cycleGAN and cGAN, can effectively enhance the visualization of pacemakers in thorax kV CT/CBCT images, therefore improving the contouring precision of these devices.

Knowledge, Attitude, and the Practice of Community Pharmacists to Dispense Opioid-Related and Opioid-Containing Medication in Eastern Province, Saudi Arabia.

Objectives: This study was done to evaluate the knowledge of community pharmacists-working in Saudi Arabia-regarding over-the-counter opioid-related and opioid-containing medications. Materials and Methods: A quantitative cross-sectional study was conducted using an online questionnaire that was distributed through social media and taken to the community pharmacists in person. A total of 101 responders were reached in a period of around 3 weeks. Results: Most of the pharmacists working in community pharmacies in Saudi Arabia are non-Saudi (85.15%), males (88.12%), and the majority are holders of bachelor's degrees (85.15%). More than half of the participants spend a considerably sufficient time with the patient 6-10 minutes (60.4%). The availability of a private counseling room in community pharmacies is significantly low (21.78%). Only (69.41%) of participants always counsel the patient before dispensing opioid-related medications. Most of the participants (84.76%) believe that all over-the-counter opioid-related and opioid-containing medications should be restricted to avoid drug abuse. Conclusion: A little neglect from pharmacists' side regarding dispensing such medications was observed; thus, there is a significant need to raise their awareness regarding over-the-counter opioid abuse.

A real-time contouring feedback tool for consensus-based contour training.

Purpose: Variability in contouring structures of interest for radiotherapy continues to be challenging. Although training can reduce such variability, having radiation oncologists provide feedback can be impractical. We developed a contour training tool to provide real-time feedback to trainees, thereby reducing variability in contouring. Methods: We developed a novel metric termed localized signed square distance (LSSD) to provide feedback to the trainee on how their contour compares with a reference contour, which is generated real-time by combining trainee contour and multiple expert radiation oncologist contours. Nine trainees performed contour training by using six randomly assigned training cases that included one test case of the heart and left ventricle (LV). The test case was repeated 30 days later to assess retention. The distribution of LSSD maps of the initial contour for the training cases was combined and compared with the distribution of LSSD maps of the final contours for all training cases. The difference in standard deviations from the initial to final LSSD maps, ΔLSSD, was computed both on a per-case basis and for the entire group. Results: For every training case, statistically significant ΔLSSD were observed for both the heart and LV. When all initial and final LSSD maps were aggregated for the training cases, before training, the mean LSSD ([range], standard deviation) was -0.8 mm ([-37.9, 34.9], 4.2) and 0.3 mm ([-25.1, 32.7], 4.8) for heart and LV, respectively. These were reduced to -0.1 mm ([-16.2, 7.3], 0.8) and 0.1 mm ([-6.6, 8.3], 0.7) for the final LSSD maps during the contour training sessions. For the retention case, the initial and final LSSD maps of the retention case were aggregated and were -1.5 mm ([-22.9, 19.9], 3.4) and -0.2 mm ([-4.5, 1.5], 0.7) for the heart and 1.8 mm ([-16.7, 34.5], 5.1) and 0.2 mm ([-3.9, 1.6],0.7) for the LV. Conclusions: A tool that uses real-time contouring feedback was developed and successfully used for contour training of nine trainees. In all cases, the utility was able to guide the trainee and ultimately reduce the variability of the trainee's contouring.

Bilateral Endometriotic Cystic Ovaries and Huge Splenic Epithelial Cyst With Elevated CA-125, CA19-9: A Report of a Rare Case.

Histologically benign splenic cysts (SCs) resemble splenic sacs. SCs are rare. Here, we present and discuss a new case of bilateral endometriotic cystic ovaries with massive SCs. A 26-year-old single female visited the hospital with left lower quadrant discomfort and suprapubic pain for three months, accompanied by anorexia, weight loss for these three months, and persistent dysmenorrhea for two years. Splenic examination revealed a soft abdomen with left hypochondria, suprapubic tenderness, and a lump in the upper left quadrant. All laboratory results were normal, except for two cancer antigens (CA-125 and CA 19-9). Therefore, magnetic resonance imaging was used to make the definitive diagnosis, which revealed bilateral ovarian endometrioma with a left upper abdominal cystic mass of splenic origin. When CA-125 and CA-19-9 readings are high, physicians should investigate endometriotic and SCs. Imaging aids diagnosis. Histopathological results are essential. Tools and follow-up should rule out malignancy, and surgery is the best treatment option.

Prevalence and difference of COVID-19 symptoms, post-COVID conditions and duration of illness among the vaccinated and unvaccinated population: a cross-sectional study in Peshawar.

Studies on coronavirus disease 2019 (COVID-19) symptoms, post-coronavirus disease (COVID) conditions, and vaccination outcomes in Pakistan are limited and inconsistent. The study investigated differences in symptoms and post-COVID conditions between vaccinated and unvaccinated individuals and the impact of vaccination on illness duration based on existing literature. Methods: The study was a 3-month cross-sectional study conducted in Peshawar, Pakistan. It targeted individuals aged 16 and above who had contracted COVID-19 at least once during the recent pandemic, regardless of gender, and confirmed through reverse transcriptase polymerase chain reaction testing. The sample size was 250, determined using the WHO sample size calculator. Data were collected through questionnaires after obtaining verbal consent and analyzed using IBM SPSS version 26, taking into account their vaccination status along with other important variables. Results: Among the 250 respondents, 143 (57.2%) were unvaccinated, while 107 (42.8%) were vaccinated at the time of contracting COVID-19. Unvaccinated subjects developed a greater variety of symptoms that lasted for longer durations (P<0.001) with symptoms like dyspnea [55 (38.5%, P=0.011)], anosmia [76 (53.1%, P=0.001)], and chest pain [24 (16.8%, P=0.029)] occurring at greater percentages. Sixty-one (42.7%) unvaccinated subjects reported post-COVID conditions as opposed to 29 (27.1%) among the vaccinated group [P=0.011; odds ratio (OR)=0.5; 95% CI=0.29-0.86]. Conclusion: The study found that COVID-19 vaccination can reduce the duration and frequency of symptoms, as well as post-COVID conditions. This is the first research of its kind conducted in Peshawar, Pakistan, and may serve as a foundation for future research in this demographic.

Restorative and Endodontic Management of a Mandibular Canine With Two Roots and Two Canals: A Case Report.

The existence of a permanent mandibular canine with two roots and two canals is rare. This case report presents restorative and endodontic management of a mandibular canine with two roots and two canals of a 32-year-old Saudi woman with multiple periradicular lesions of mandibular anterior teeth. Cone beam computed tomography (CBCT) was used for accurate diagnosis of the root canal morphology. CBCT helped to accomplish the restorative and endodontic treatment in a conservative approach.

Automated Contouring and Planning in Radiation Therapy: What Is 'Clinically Acceptable'?

Developers and users of artificial-intelligence-based tools for automatic contouring and treatment planning in radiotherapy are expected to assess clinical acceptability of these tools. However, what is 'clinical acceptability'? Quantitative and qualitative approaches have been used to assess this ill-defined concept, all of which have advantages and disadvantages or limitations. The approach chosen may depend on the goal of the study as well as on available resources. In this paper, we discuss various aspects of 'clinical acceptability' and how they can move us toward a standard for defining clinical acceptability of new autocontouring and planning tools.

Quality of Fixed Dental Prostheses and Patient Satisfaction in a Sample From Saudi Arabia.

BACKGROUND: The objective of the study was to retrospectively assess the clinical performance of dental prostheses, single crowns, and three-unit bridges to identify clinical biological and mechanical complications in the Ha'il province of Saudi Arabia. METHODS: The study was conducted between March 2021 to October 2021 and included 421 patients who underwent crown and tooth-supported fixed partial denture (FPD) procedures at the Dental Polyclinics Center in the Ha'il region of Saudi Arabia from 2010-2020. The planned sampling approach was applied. Patients who underwent crown and FPD placements at the dental center within the scheduled period were identified through clinical assessments. The inclusion criteria were met by patients with three-unit FPDs and a single crown containing a natural contralateral tooth or teeth. A total of six general dentists conducted clinical exams. Patient satisfaction and technical and biological issues were the evaluation criteria for crowns and FPDs. The frequency and percentage of the various characteristics employed in the current investigation were ascertained using cross-tabulation. The Chi-square test was employed to assess the associations between categorical variables, with p-values ≤ 0.05 considered significant.  Results: Marginal integrity was recorded in 332 participants (78.9%), which was satisfactory for the majority of the restoration. The acceptance morphology was present in 252 (59.9%) restorations. The highest rate of the restorations 274 (66.2%) had satisfactory color. In 86 cases (20.4%), there was visible periodontal depth of at least 5 mm. Three hundred and six (72.7%) of the fixed restorations had gingival bleeding connected to them, and 96 (22.8%) teeth had periapical lesions. A total of 311 patients (73.9%) reported they were satisfied with their fixed restorations. CONCLUSIONS: The technical and biological complications noted in the current study were not higher compared with other studies of crowns and fixed dental prostheses. The majority of patients were satisfied with the restoration.

Growth performance and carcass traits of two commercial broiler strains fed diet supplemented with essential oils.

The current study aimed to evaluate the efficacy of using essential oils (EOs) on growth, carcass, and meat quality traits of two commercial broiler strains raised to 35 days of age. A total of 384 chicks were obtained upon hatching from a local hatchery (192 Indian River and 192 Hubbard). Birds were allocated randomly according to their strain into three groups: control, EOs, and EOs grower. Body weight was recorded at the beginning of the trial and then at the end of each phase diet as well as for the feed intake. Sixteen birds from the combination of each strain-essential oil were chosen randomly to evaluate carcass characteristics at the end. Hubbard consumed more feed during the grower stage (p = 0.02) and overall (p = 0.002) compared to Indian River. Carcass cuts percentages were affected by strain (p < 0.01). Shear force was lower for the Hubbard (p = 0.002). Essential oils showed a significant effect on cooking loss (p = 0.03). A significant strain by essential oil interactions was obtained for cooking loss, shear force, and meat redness (color coordinate ∗a) Cooking loss was greater for the Indian river with the EOs grower treatment. Briefly, growth and carcass traits were affected by strain. The inclusion of EOs had slightly improved meat quality traits.

Fattening performance, nutrient digestibility, and carcass traits of two fat-tailed sheep breeds.

Fat-tailed sheep breeds are the most widespread types of sheep in the Middle East. They are hardy and have acceptable growth and carcass traits. The purpose of this study is to compare the fattening performance, nutrient digestibility, and carcass characteristics of two fat-tailed sheep breeds, Awassi and Najdi. Thirty single-born Awassi and Najdi male lambs (15 lambs per breed) were examined for fattening and carcass characteristics. The study lasted 70 days (10 days adaptation period and 60 days for collecting the data). Feed consumption was monitored daily, and the body weight of lambs was recorded upon arrival to the trial area and biweekly afterward. Lambs were slaughtered at the end of the study to assess carcass and meat quality characteristics. Nitrogen intake and retained nitrogen were higher (P < 0.05) for Najdi lambs. The digestibility of nutrients was comparable between the two genetic groups. Initial body weight, final body weight, average daily gain, and dry matter intake were not affected (P > 0.05) by the lamb's breed. Furthermore, the feed-to-gain ratio, hot and cold carcass weights, and dressing percentage were not affected by breed type (P > 0.05). Breed type has no influence on the shoulder, loin, and rack percentages of the lamb. Moreover, meat quality traits were not affected by the lamb's breed (P > 0.05). In the dissected leg cut, no differences in the leg component were found among the two breed types (P > 0.05). Results of this study reveal that nitrogen intake and retained nitrogen were higher for Najdi lambs, but this was not reflected in fattening performance and carcass traits.

Microhardness and gloss of a new CAD-CAM hybrid material following accelerated aging and coffee immersion.

PURPOSE: To evaluate and compare the effect of accelerated aging and coffee immersion on the microhardness and gloss of a new CAD/CAM hybrid material (Crystal Ultra) to those of contemporary restorative materials. MATERIALS AND METHODS: A total of 160 specimens (12 x 14 x 1 mm ± 0.05 mm) were obtained from (IPS e.max [IPS], VITA Enamic [VE], Crystal Ultra [CU], Lava Ultimate [LU], and CeraSmart [CS]) high-translucency CAD/CAM blocks. The Vickers microhardness and gloss of the specimens were determined following thermocycling and coffee immersion. Data analysis was performed using SPSS (α = .05). RESULTS: IPS and CS specimens exhibited the highest (572.66 ± 11.30) and lowest (61.92 ± 3.91) microhardness, respectively. The highest gloss was observed with IPS specimens (3.31 ± 0.32), and LU specimens showed the lowest gloss (2.33 ± 0.06). A significant difference in gloss was observed between the materials at all measurement intervals (P < .01), except at T0 (P = .43). IPS specimens showed no significant changes in either group at any measurement interval. CONCLUSION: The microhardness and gloss of the new CU material were comparable to those of the tested contemporary hybrid restorative materials. Glass-ceramic showed superior hardness and gloss compared to hybrid restorative materials. Accelerated aging by thermocycling and staining significantly affected the microhardness and gloss of all the tested CAD/CAM materials.